The energy saving potential of retrofitting a smart heating system: A residence hall pilot study

Author(s):  
Yannick De Bock ◽  
Andres Auquilla ◽  
Ellen Bracquene ◽  
Ann Nowé ◽  
Joost R. Duflou
2014 ◽  
Vol 1070-1072 ◽  
pp. 427-430
Author(s):  
Yuan Liu ◽  
Qi Wang ◽  
Pu Song

In order to evaluate the energy saving potential during centrifugal water chillers’ operation, centrifugal water chillers from an industrial enterprise in China are investigated. Based on the actual operation data gained from 3 different water chillers, their working performances and the energy consumption situations are reported and researched in this paper. Meanwhile, the energy saving potential and economic performance of the chillers are also reported and analyzed, when the appropriate variable frequency systems are introduced.


Energies ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 828 ◽  
Author(s):  
Sanghoon Baek ◽  
Sangchul Kim

A phase change material (PCM) is an energy storage mass with high heat storage performance. In buildings, PCMs can be utilized to save energy in radiant floor heating systems. This study aims to analyze the thermal performance and energy saving potential by the PCM radiant floor heating system based on wet construction method and hot water. For such analysis, EnergyPlus program was used. As for the results, it was found that the proposed system almost maintained the set point of indoor air and a floor surface. Moreover, when a 10 mm PCM was applied, it was possible to save 2.4% of heating energy annually compared to existing buildings. In particular, when a 20–50 mm PCM was applied, it was found that 7.3–15.3% of heating energy was reduced annually. If indoor air temperature exceeds the comfort range of the proposed system, this problem can be solved by adjusting the set point of the floor surface or by increasing the temperature of hot water.


2021 ◽  
Vol 25 (4 Part B) ◽  
pp. 3113-3121
Author(s):  
Guojing Geng ◽  
Xianzhe Li

Chinese heating method has gradually shifted from small fragments to centralized regional heating. This heating method has achieved obvious energy-saving benefits. The article establishes an economic model of the energy utilization rate of the central heating system and installs the system exergy balance equation at the same time. The simulation found that the energy utilization coefficient of the heating system is high and has a high energy-saving potential. The effect of energy utilization is poor, and it has great potential for energy saving.


Energy ◽  
2020 ◽  
Vol 193 ◽  
pp. 116758 ◽  
Author(s):  
Eid S. Gaballah ◽  
Tarek Kh Abdelkader ◽  
Shuai Luo ◽  
Qiaoxia Yuan ◽  
Abd El-Fatah Abomohra

2012 ◽  
Vol 594-597 ◽  
pp. 2146-2153 ◽  
Author(s):  
Qi Fen Li ◽  
Tao Li ◽  
Wei Dong Sun ◽  
Zhi Tian Zhou ◽  
Cui Cui Pan ◽  
...  

How to reduce the energy consumption of air conditioning, to use new energy such as solar appropriately, and to achieve energy savings, are the problems must be treated in HVAC industry. Because of the high energy consumption of traditional air-conditioning and the need for reduction of emission, an air conditioning system (utilizing solar dehumidifying applied to heating/cooling radiant floor) is designed and installed in this paper. At the same time, as an example, the energy saving potential of system is analyzed. This type of heating/cooling radiant floor system is worth promoted if solve the dehumidification properly. By separating to deal with heat and moisture can reduce the energy-cost of traditional air-conditioning, and to achieve purposes of primary energy saving.


Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5581 ◽  
Author(s):  
Shi-Yi Song ◽  
Hong Leng

Accurate simulation and prediction of occupants’ energy use behavior are crucial in building energy consumption research. However, few studies have focused on household energy use behavior in severely cold regions that have unique energy use patterns because of the low demand of cooling in summer and the use of central heating system in winter. Thus, we developed an agent-based model to simulate the household electricity use behavior in severely cold regions, according to data for Harbin, China. The model regards apartments, residents, household appliances, and energy-management departments as agents and generates the household electricity consumption with respect to time, temperature, and energy-saving events. The simulation parameters include basic information of the residents, their energy-saving awareness, their appliance use behaviors, and the impact of energy-saving management. Electricity use patterns are described by decision-making mechanisms and probabilities obtained through a questionnaire survey. In the end, the energy-saving effects of different management strategies are evaluated. The results indicate that the model can visually present and accurately predict the dynamic energy use behavior of residents. The energy-saving potential of household electricity use in severely cold regions is mainly concentrated in lighting and standby waste, rather than cooling and heating, since the cooling demand in summer is low and the heating in winter mainly relies on central heating system of the city, not on household electricity appliances. Energy-saving promotion can significantly reduce the amount of energy waste (41.89% of lighting and 97.79% of standby energy consumption), and the best frequency of promotional events is once every four months. Residents prefer incentive policies, in which energy-saving effect is 57.7% larger than that of increasing electricity prices. This study realized the re-presentation of the changes of energy consumption in a large number of households and highlighted the particularity of household energy-saving potential in severely cold regions. The proposed model has a simple structure and high output accuracy; it can help cities in severely cold regions formulate energy-saving management policies and evaluate their effects.


Sign in / Sign up

Export Citation Format

Share Document