Instantaneous energy separation in a free jet. Part I. Flow measurement and visualization

2003 ◽  
Vol 46 (21) ◽  
pp. 3975-3981 ◽  
Author(s):  
B. Han ◽  
R.J. Goldstein
Keyword(s):  
Flow Measurement ◽  
Energy Separation ◽  
Free Jet ◽  
Instantaneous Energy

Production and STEM examination of controlled-size silver clusters

1983 ◽  
Vol 41 ◽  
pp. 338-339
Author(s):  
M. A. Listvan ◽  
R. P. Andres
Keyword(s):  
Cluster Size ◽  
Metal Clusters ◽  
Experimental Parameter ◽  
Carbon Films ◽  
Metal Species ◽  
Silver Clusters ◽  
Free Jet ◽  
Size Dependent ◽  
Cluster Properties ◽  
Controllable Size

Knowledge of the function and structure of small metal clusters is one goal of research in catalysis. One important experimental parameter is cluster size. Ideally, one would like to produce metal clusters of regulated size in order to characterize size-dependent cluster properties.A source has been developed which is capable of producing microscopic metal clusters of controllable size (in the range 5-500 atoms) This source, the Multiple Expansion Cluster Source, with a Free Jet Deceleration Filter (MECS/FJDF) operates as follows. The bulk metal is heated in an oven to give controlled concentrations of monomer and dimer which were expanded sonically. These metal species were quenched and condensed in He and filtered to produce areosol particles of a controlled size as verified by mass spectrometer measurements. The clusters were caught on pre-mounted, clean carbon films. The grids were then transferred in air for microscopic examination. MECS/FJDF was used to produce two different sizes of silver clusters for this study: nominally Ag6 and Ag50.

Blast furnace tapping flow measurement

1991 ◽  
Vol 88 (9) ◽  
pp. 905-911
Author(s):  
C.A.A. Jonker ◽  
J. Vermeij
Keyword(s):  
Blast Furnace ◽  
Flow Measurement

Structured methods for improving flow measurement accuracy in pipelines

2020 ◽  
pp. 30-35
Author(s):  
Gurami N. Akhobadze
Keyword(s):  
Flow Measurement ◽  
Measurement Accuracy ◽  
Directional Coupler ◽  
Signal To Noise Ratio ◽  
Scattered Wave ◽  
Orthogonal Polarization ◽  
Flow Sensors ◽  
Information Signal ◽  
Mass Flows ◽  
Processing Device

In the age of digital transformation of production processes in industry and science the development and design of intelligent flow sensors for granular and liquid substances transferring through pipelines becomes more important. With this in view new approaches for improving the accuracy of microwave flowmeters are proposed. Taking into account the characteristics ofelectromagnetic waves propagating through a pipeline, a wave scattered by inhomogeneities of the controlled medium is analyzed. Features of the transformation of the polarized scattered wave limiting the geometric dimensions of the pipeline and optimizing the values of the useful scattered signal are revealed. Expediency of collection of the information signal with orthogonal polarization of the scattered wave and through a directional coupler is substantiated. The method of estimating the measurement accuracy with reference to the signal-to-noise ratio at the input of the processing device is given. The research results can be used in cryogenic machine engineering to measure volume and mass flows of liquid cryogenic products.

Investigation of the influence of the flow structure on the accuracy of flow measurement before a hydrometric structure in an open channel

2020 ◽  
pp. 41-44
Author(s):  
Anatoly Kusher
Keyword(s):  
Velocity Profile ◽  
Flow Velocity ◽  
Water Flow ◽  
Flow Measurement ◽  
Water Discharge ◽  
Critical Depth ◽  
Flow Measurements ◽  
Study Results ◽  
Flow Velocity Profile ◽  
Upstream Flow

The reliability of water flow measurement in irrigational canals depends on the measurement method and design features of the flow-measuring structure and the upstream flow velocity profile. The flow velocity profile is a function of the channel geometry and wall roughness. The article presents the study results of the influence of the upstream flow velocity profile on the discharge measurement accuracy. For this, the physical and numerical modeling of two structures was carried out: a critical depth flume and a hydrometric overfall in a rectangular channel. According to the data of numerical simulation of the critical depth flume with a uniform and parabolic (1/7) velocity profile in the upstream channel, the values of water discharge differ very little from the experimental values in the laboratory model with a similar geometry (δ < 2 %). In contrast to the critical depth flume, a change in the velocity profile only due to an increase in the height of the bottom roughness by 3 mm causes a decrease of the overfall discharge coefficient by 4…5 %. According to the results of the numerical and physical modeling, it was found that an increase of backwater by hydrometric structure reduces the influence of the upstream flow velocity profile and increases the reliability of water flow measurements.

MEASUREMENT OF BLOOD FLOW WITH FREELY DIFFUSIBLE INDICATORS AS INERT GASES, ANTIPYRINE, LABELLED WATER AND RUBIDIUM

1972 ◽  
Vol 68 (2_Supplb) ◽  
pp. S95-S111 ◽  
Author(s):  
Niels A. Lassen ◽  
Ole Andrée Larsen
Keyword(s):  
Blood Flow ◽  
Flow Measurement ◽  
Capillary Wall ◽  
Inert Gases ◽  
Tissue Blood Flow ◽  
Blood Flow Measurement

ABSTRACT Indicators which freely cross the capillary wall can be used for measurement of tissue blood flow in many different ways. Basically one can distinguish two categories of methods, viz. the ones where the indicator enters the tissue via the inflowing blood and the ones where the indicator is deposited locally in the tissue. The most important methods are briefly described with special emphasis on the theory of blood flow measurement.

Sign in / Sign up

Export Citation Format

Share Document