00/01006 A comparative performance analysis of irreversible Carnot heat engines under maximum power density and maximum power conditions

2000 ◽  
Vol 41 (2) ◽  
pp. 112
Keyword(s):  
Performance Analysis ◽  
Power Density ◽  
Maximum Power ◽  
Maximum Power Density ◽  
Comparative Performance ◽  
Heat Engines

Carbon Nano Tube-Polymer Hybrid Nanocomposite Electrodes for Porous Polydimethylsiloxane Sponge-Based Flexible Triboelectric Nanogenerators

2021 ◽  
Vol 21 (9) ◽  
pp. 4680-4684
Author(s):  
Dae-Hyeon Kwon ◽  
Jaebum Jeong ◽  
Yongju Lee ◽  
Jun-Kyu Park ◽  
Suwoong Lee ◽  
...  
Keyword(s):  
Power Density ◽  
Output Voltage ◽  
Maximum Power ◽  
Maximum Power Density ◽  
Flexible Electrodes ◽  
Flexible Devices ◽  
Copper Electrodes ◽  
Polymer Hybrid ◽  
Triboelectric Nanogenerators ◽  
Carbon Nano Tube

Flexible triboelectric nanogenerators (TENGs) have attracted much attention because of its environmentally friendly, practical, and cost-producing advantages. In flexible TENGs, it is important to study the flexible electrodes in order to fabricate the fully flexible devices. Here, we compared electrical characteristics of the sponge porous polydimethylsiloxane (PDMS)-based flexible TENGs with two types of flexible electrodes, copper and carbon nanotube (CNT)-PDMS electrodes. The output voltage and maximum power density of sponge PDMS-based flexible TENGs with copper and CNTPDMS electrodes were compared. The voltage and power density of sponge PDMS-based flexible TENGs with CNT-PDMS electrodes were improved compare to those with copper electrodes. The output voltage and the maximum power density of sponge PDMS-based flexible TENGs with copper and CNT-PDMS electrodes increased 4 times and 7 times, respectively. It is attributed to higher electrical conductivity and stably flow electricity of CNT than those of copper.

Influence of Composition of Gd-Doped Ceria Electrolyte on Performance of Solid Oxide Fuel Cell

2012 ◽  
Vol 724 ◽  
pp. 389-392 ◽  
Author(s):  
Yuta Ibusuki ◽  
Yoshihiro Hirata ◽  
Soichiro Sameshima ◽  
Naoki Matsunaga
Keyword(s):  
Power Density ◽  
Open Circuit ◽  
Solid Oxide ◽  
Maximum Power ◽  
Cell Performance ◽  
Excess Oxygen ◽  
Doped Ceria ◽  
Oxide Fuel ◽  
Maximum Power Density ◽  
Oxide Ion Conductivity

Cell performance was measured for four types of Ni (40 vol%)-Gd-doped ceria (GDC) anode-supported solid oxide fuel cells with GDC electrolyte (40-120 μm thickness) of Ce1-xGdxO2-x/2 compositions (x = 0.05, 0.1, 0.15 and 0.2) at 773-1073 K using a H2 fuel. (La0.8Sr0.2)(Co0.8Fe0.2)O3 cathode was printed on the GDC films. The open circuit voltage and maximum power density at 873-1073 K showed a maximum at x = 0.1. The maximum power density at x = 0.1 was 166 and 506 mW/cm2 at 873 and 1073 K, respectively. The excess oxygen vacancy at x = 0.1-0.2, which does not contribute to the oxide ion conductivity, reacts with a H2 fuel to form electrons (H2 + VO 2H+ + VO×, VO× VO + 2e-). This reaction reduces the cell performance.

Sign in / Sign up

Export Citation Format

Share Document