97/02190 Transition of thermal power plants to coal combustion in circulating fluidized bed

1997 ◽  
Vol 38 (3) ◽  
pp. 175
Author(s):  
Ainur A. Kuandykova ◽  
Vitaly M. Lebedev

The existing issues during the combustion of Kazakh coal from the Ekibastuz basin in the Omsk energy system are noted. The environmental problems of coal generation in Omsk are outlined. The possibility of transferring the Omsk coal-fired thermal power plants to the combustion of domestic coals is considered. The options for increasing the efficiency of using solid fossil fuel in the production of electric and thermal energy are given. The existing problem of storing ash and slag wastes obtained by burning high-ash Ekibastuz coals is noted. The transfer of the Omsk CHPPs to the combustion of brown coal from the Kansk-Achinsky deposit, provided that highly effective environmentally friendly technologies are used It is noted that the technology of combustion of fuels in a circulating fluidized bed (CFB) has been industrially developed and implemented in power boilers. The results of operation of the first in Russia CFB boiler of unit No. 9 with a capacity of 330 MW at the Novocherkasskaya SDPP are presented


2021 ◽  
Vol 323 ◽  
pp. 8-13
Author(s):  
Jadambaa Temuujin ◽  
Damdinsuren Munkhtuvshin ◽  
Claus H. Ruescher

With a geological reserve of over 170 billion tons, coal is the most abundant energy source in Mongolia with six operating thermal power stations. Moreover, in Ulaanbaatar city over 210000 families live in the Ger district and use over 800000 tons of coal as a fuel. The three thermal power plants in Ulaanbaatar burn about 5 million tons of coal, resulting in more than 500000 tons of coal combustion by-products per year. Globally, the ashes produced by thermal power plants, boilers, and single ovens pose serious environmental problems. The utilization of various types of waste is one of the factors determining the sustainability of cities. Therefore, the processing of wastes for re-use or disposal is a critical topic in waste management and materials research. According to research, the Mongolian capital city's air and soil quality has reached a disastrous level. The main reasons for air pollution in Ulaanbaatar are reported as being coal-fired stoves of the Ger residential district, thermal power stations, small and medium-sized low-pressure furnaces, and motor vehicles. Previously, coal ashes have been used to prepare advanced materials such as glass-ceramics with the hardness of 6.35 GPa, geopolymer concrete with compressive strength of over 30 MPa and zeolite A with a Cr (III) removal capacity of 35.8 mg/g. Here we discuss our latest results on the utilization of fly ash for preparation of a cement stabilized base layer for paved roads, mechanically activated fly ash for use in concrete production, and coal ash from the Ger district for preparation of an adsorbent. An addition of 20% fly ash to 5-8% cement made from a mixture of road base gave a compressive strength of ~ 4MPa, which exceeds the standard. Using coal ashes from Ger district prepared a new type of adsorbent material capable of removing various organic pollutants from tannery water was developed. This ash also showed weak leaching characteristics in water and acidic environment, which opens up an excellent opportunity to utilize.


2019 ◽  
Vol 23 (Suppl. 5) ◽  
pp. 1611-1626
Author(s):  
Predrag Stefanovic ◽  
Dejan Cvetinovic ◽  
Zoran Markovic ◽  
Milic Eric ◽  
Simeon Oka ◽  
...  

Paper presents short review of research problems, applied methods for solving problems and main results obtained by the researchers in Laboratory for Thermal Engineering and Energy (LTE) of the "Vinca" Institute of Nuclear Sciences, Belgrade, Serbia dealing with pulverized coal combustion processes and technologies for reduction of pollutions problems at thermal power plants in a period since 2000. The presented results were published in numerous studies realized for different users, Ph. D., Masters, and Specialist thesis, in international and domestic scientific journals and monographs, presented at numerous international and domestic scientific conferences, etc. Presented research projects and results of applied research projects realized at pulverized coal combustion thermal power plants clearly show that LTE team was involved in key activities of rehabilitation and modernization, including implementation of best available technologies for pollution reduction at thermal power plants, in the region of South East Europe.


Materials ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7460
Author(s):  
Mingkai Zhou ◽  
Xinyue Liu ◽  
Xiao Chen ◽  
Peng Gao

Circulating fluidized bed slag (CFBS) is an industrial waste produced by coal combustion in power plants. To explore the application of CFB slag in cement-stabilized bases, this paper studies the influence of different dosage of CFBS on the mechanics, water stability, and shrinkage of cement-stabilized soil using laboratory experiments. The hydration activity and interface morphology of CFBS in cement-stabilized clay were observed using XRD and SEM. The improvement mechanism of CFBS on the performance of cement-stabilized clay was revealed. The results indicated that, compared with cement-stabilized clay, cement–CFBS-stabilized clay exhibited better mechanical and water stability, and significantly inhibited the shrinkage deformation of cement-stabilized clay. When the addition of CFBS was 70%, cement–CFBS-stabilized clay had the best mechanics and durability. Microscopic tests show that CFBS contains more active silicon aluminum oxide, which is easily dissolved and the hydration of which produces more gel products, so the mixture structure is denser, the strength is improved, and water does not easily evaporate; it has the characteristics of micro expansion which compensates for dry shrinkage deformation.


2019 ◽  
Vol 0 (3) ◽  
pp. 154-160
Author(s):  
Valerii Ivanovych Vitko ◽  
Hryhorii Dmytrovych Kovalenko ◽  
Hanna Volodymyrivna Khabarova ◽  
Hennadii Borysovych Varlamov

Sign in / Sign up

Export Citation Format

Share Document