Inert matrix fuels (IMFs) are a possible option to reduce separated plutonium stockpiles by burning it in light water reactor (LWR) fleet. A high burning efficiency targeted by preventing new plutonium buildup under irradiation (U-free fuel), a proved high radiation damage, and leaching resistance are fundamental requirements when a once-through fuel cycle strategy is planned. Among other options, both calcia-stabilized zirconia (CSZ) and thoria fulfill these criteria standing as the most promising matrices to host plutonium. While several in-pile tests concerning thoria fuels are found, calcia-stabilized zirconia under-irradiation performance is still to be fully assessed; with this regard the thermal conductivity, markedly lower than the uranium oxide (UOX) and mixed oxide (MOX) cases, plays a fundamental role. For this reason, ENEA has conceived a comparative in-pile testing of three different U-free inert matrix fuel concepts, which have been performed in the OECD Halden HBWR (IFA-652 experiment). The discharge burnup accomplished about 90–97% of the 45MWd∕kgUeq target under typical LWR irradiation conditions. The test rig is a six-rod bundle loaded with IM, IMT, and T innovative fuels. IM and T fuels have, respectively, CSZ and thoria as matrices, the fissile phase being the high enriched uranium (HEU) oxide (UO2 93% U235 enriched). IMT is a ternary fuel composed by CSZ+thoria matrix and HEU oxide as a fissile phase. Thoria is added in IMT fuel to improve the low IM reactivity feedback coefficients. Pins are instrumented providing fuel centerline temperature, pin inner pressure, and fuel stack elongation measurements. Our purpose is to investigate the key processes of IMF under-irradiation behavior by means of the TRANSURANUS fuel performance code. Thermal conductivity and its degradation with burnup, densification-swelling response, and fission gas release (FGR) are tentatively modeled in the burnup range of IFA-652. In particular, the effects of pellet geometry and fuel microstructures in the IM and IMT cases are pointed out. The consistency of our results is discussed aiming at understanding the in-pile response, as a fundamental step, in the perspective of future deployment of the nuclear fuels we are dealing with. Notwithstanding this ambitious objective, it is clear, however, that these results rely on a limited data set and that, as TRANSURANUS is a semi-empirical code mostly tailored for commercial fuels, the modeling of the IMF is still a work in progress.
Comparison of the thermal performance between conventional and cob building
