Development of a ph Control System for nutrient solution in EBB and Flow Hydroponic Culture Based on Fuzzy Logic

2001 ◽  
Vol 34 (11) ◽  
pp. 87-90 ◽  
Author(s):  
Herry Suhardiyanto ◽  
Kudang B. Seminar ◽  
Yudi Chadirin ◽  
Budi I. Setiawan
2021 ◽  
Vol 12 (1) ◽  
pp. 405
Author(s):  
Cheng-Hung Chen ◽  
Shiou-Yun Jeng ◽  
Cheng-Jian Lin

This study proposes a fuzzy logic controller for adjusting the electrical conductivity (EC) and pH of the nutrient solution in a hydroponic system. The proposed control system detects the EC and pH of the solution through sensors and adjusts the working time of the solution pump through the fuzzy controller. Specifically, the EC and pH of the nutrient solution are maintained at specific values. A Raspberry Pi3 development board is used in the proposed control system to realize and solve the problem of adjusting the EC and pH of the solution. In the fuzzy controller, the inputs are EC and pH sensors, and the output is the operating time of the pump. Experimental results indicate that the proposed control system can effectively reduce the measurement burden and complex calculations of producers by adjusting nutrient solutions.


2018 ◽  
Vol 2 (1) ◽  
Author(s):  
Raid Daoud ◽  
Yaareb Al-Khashab

The internet service is provided by a given number of servers located in the main node of internet service provider (ISP). In some cases; the overload problem was occurred because a demand on a given website goes to very high level. In this paper, a fuzzy logic control (FLC) has proposed to distribute the load into the internet servers by a smart and flexible manner. Three effected parameters are tacked into account as input for FLC: link capacity which has three linguistic variables with Gaussian membership function (MF): (small, medium and big), traffic density with linguistic variables (low, normal and high) and channel latency with linguistic variables (empty, half and full); with one output which is the share server status (single, simple and share). The proposed work has been simulated by using MATLAB 2016a, by building a structure in the Fuzzy toolbox. The results were fixed by two manners: the graphical curves and the numerical tables, the surface response was smoothly changed and translates the well-fixed control system. The numerical results of the control system satisfy the idea of the smart rout for the incoming traffics from the users to internet servers. So, the response of the proposed system for the share of server ratio is 0.122, when the input parameter in the smallest levels; and the ratio is 0.879 when the input parameters are in highest level. The smart work and flexible use for the FLC is the main success solution for most of today systems control.


Author(s):  
Fachrudin Hunaini ◽  
Imam Robandi ◽  
Nyoman Sutantra

Fuzzy Logic Control (FLC) is a reliable control system for controlling nonlinear systems, but to obtain optimal fuzzy logic control results, optimal Membership Function parameters are needed. Therefore in this paper Particle Swarm Optimization (PSO) is used as a fast and accurate optimization method to determine Membership Function parameters. The optimal control system simulation is carried out on the automatic steering system of the vehicle model and the results obtained are the vehicle's lateral motion error can be minimized so that the movement of the vehicle can always be maintained on the expected trajectory


Sign in / Sign up

Export Citation Format

Share Document