In-orbit results from the attitude determination and control system of ALSAT-2B

2021 ◽  
pp. 1-26
Author(s):  
H. Benzeniar

ABSTRACT The Algerian Space Agency has been active in the field of microsatellite engineering for more than 15 years and has successfully developed microsatellites under several know-how transfer technology programs, six to date. This paper presents the flight results and lessons learned from the attitude determination and control system (ADCS) flown on the ALSAT-2B satellite, an Earth observation microsatellite, by analysing the behaviour of the satellite from the initial attitude acquisition through the coarse pointing mode then the nominal mode, where the payload is first tested, and finally the orbit control mode. The spacecraft was launched on 26 September 2016 and placed into a 670km Sun-synchronous orbit with a solar local time at an ascending node of 22:15. The ADCS performance presented here mainly focuses on the launch and early operation results. ALSAT-2B includes four reaction wheels in a pyramidal configuration, three gyros, three Sun sensors, three magneto-torquers, one magnetometer, and one star tracker for agile and accurate attitude control. In addition, a propulsion system based on four 1N hydrazine thrusters is also used on board the microsatellite. The main new development in this platform compared with previous ones of the same type is the fusion of the star tracker and measurements by the three gyroscopes into one gyrostellar estimator that was implemented for the first time on ALSAT-2B, and the pyramidal configuration of the wheels, aiming to increase the angular momentum. The results obtained from the early launch operations for different ADCS modes are very encouraging and fulfil all the requirements set during design and testing. Currently, the satellite has accomplished its fourth year in orbit and is still operational and producing high-quality images.

Author(s):  
Disha Gundecha ◽  
Nishant Gavhane ◽  
Vedant Dubey ◽  
Sahil Joshi ◽  
Pranav Karve ◽  
...  

2021 ◽  
Author(s):  
William Travis ◽  
Michael W.R. Alger ◽  
Ijaz Qureshi ◽  
Emily Shepherdson ◽  
Anton de Ruiter

Author(s):  
J. Prado ◽  
G. Bisiacchi ◽  
L. Reyes ◽  
E. Vicente ◽  
F. Contreras ◽  
...  

A frictionless environment simulation platform, utilized for accomplishing three-axis attitude control tests in small satellites, is introduced. It is employed to develop, improve, and carry out objective tests of sensors, actuators, and algorithms in the experimental framework. Different sensors (i.e. sun, earth, magnetometer, and an inertial measurement unit) are utilized to assess three-axis deviations. A set of three inertial wheels is used as primary actuators for attitude control, together with three mutually perpendicular magnetic coils intended for desaturation purposes, and as a backup control system. Accurate balancing, through the platform’s center of mass relocation into the geometrical center of the spherical air-bearing, significatively reduces gravitational torques, generating a virtually torque-free environment. A very practical balancing procedure was developed for equilibrating the table in the local horizontal plane, with a reduced final residual torque. A wireless monitoring system was developed for on-line and post-processing analysis; attitude data are displayed and stored, allowing properly evaluate the sensors, actuators, and algorithms. A specifically designed onboard computer and a set of microcontrollers are used to carry out attitude determination and control tasks in a distributed control scheme. The main components and subsystems of the simulation platform are described in detail.


2022 ◽  
Author(s):  
Raunak Srivastava ◽  
Roshan Sah ◽  
Kaushik Das

2013 ◽  
Vol 347-350 ◽  
pp. 768-771 ◽  
Author(s):  
Jian Jun Zhou ◽  
Xiao Fang Wang ◽  
Xiu Wang ◽  
Wei Zou ◽  
Ji Chen Cai

A greenhouse monitoring and control system based on Zigbee networks was developed. This system consists of greenhouse data acquisition controller and greenhouse remote monitoring and control software. The system could monitor temperature and humidity, soil water content and concentration of carbon dioxide in greenhouse and could save these greenhouse data to database. Greenhouse acquisition controller had two kinds of control modes, including local manual control mode and remote wireless control mode in monitoring center. Greenhouse remote monitoring and control software can collect, display and record the collected data, also can control greenhouse environment. According to the current indoor temperature, the target temperature and the offset temperature, PID control method is used for temperature control in greenhouse. The system is implemented using low power wireless components, and easy to be installed. A good wireless solution is provided by this system for centralized management of the greenhouse group.


Sign in / Sign up

Export Citation Format

Share Document