Time averaging in relation to local volume averaging and time-volume averaging versus volume-time averaging

Author(s):  
William T. Sha
1985 ◽  
Vol 107 (3) ◽  
pp. 642-647 ◽  
Author(s):  
K. Vafai ◽  
R. L. Alkire ◽  
C. L. Tien

This paper presents an experimental investigation on the effects of a solid impermeable boundary and variable porosity on forced convection in porous media. Emphasis is placed on the channeling effects on heat transfer in packed beds. The local volume-averaging technique is used to establish the governing equations and a numerical scheme is developed which incorporates the boundary and variable porosity effects on heat transfer. The experimental results for the heat flux at the boundary are presented as a function of the pertinent variables in a packed bed. The Nusselt number is found to increase almost linearly with an increase in the Reynolds number based on the pore diameter. The experimental results are found to be in good agreement with the theoretical results which account for the variable porosity effects. A comparison between the numerical and the experimental results demonstrates the importance of boundary and variable porosity effects on heat transfer in variable porosity media.


2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Mohammad Izadifar

Local volume averaging approach was used for modeling and simulation of cell growth and proliferation, as well as glucose transfer within a cylindrical cartilage scaffold during cell cultivation. The scaffold matrix including the nutrient solution filling spaces among seeded cell colonies was treated as a porous medium. Applying differential mass balance of cells and glucose to a representative elementary volume of the scaffold, two diffusional mass transfer models were developed based on local volume averaged properties. The derived governing equations take into account time-dependent glucose diffusion, glucose consumption by cells, cell migration, apoptosis, and cell reproduction within the scaffold. Since the volumetric fraction of cells in the scaffold relies on cell growth, which strongly depends on glucose concentration in the scaffold, the governing equations were solved simultaneously using implicit finite difference method and Gauss-Seidel technique. Simulation results showed that cell volumetric fraction of the scaffold can reach about 45% after 50 days if a culture medium with a glucose concentration of 45 kgm−3 is used. Also, simulation results indicate that more uniform and higher average cell volume fraction of the scaffold can be obtained if biomanufacturing-based cell seeding is used across the scaffold rather than cell seeding on the scaffold surface.


1986 ◽  
Vol 108 (1) ◽  
pp. 132-140 ◽  
Author(s):  
K. Vafai ◽  
S. Whitaker

This paper analyzes the accumulation and migration of moisture in an insulation material. The problem is modeled as a two-dimensional, transient, multiphase flow in a porous slab. The local volume-averaging technique is used to arrive at a rigorous and fundamental formulation of the heat and mass transfer process in an insulation system. The controlling parameters and assumptions are presented in detail. The equations are solved by devising a two-phase numerical scheme to obtain the condensation regions and the factors which affect the temperature distribution. The phase change process and its effects on the temperature, vapor density, moisture content, liquid content, and the vapor pressure distributions are discussed in detail. The significant transport mechanisms are identified and a simplified formulation of heat and mass transfer, accompanied by phase change, in an insulation system is presented.


Sign in / Sign up

Export Citation Format

Share Document