Application of a fluorescent marker with quantitative bioburden methods to assess cleanliness
AbstractBackgroundImprovement of environmental cleaning in hospitals has been shown to decrease in-hospital cross transmission of pathogens. Several objective methods, including aerobic colony counts (ACCs), the adenosine triphosphate (ATP) bioluminescence assay, and the fluorescent marker method have been developed to assess cleanliness. However, the standard interpretation of cleanliness using the fluorescent marker method remains uncertain.ObjectiveTo assess the fluorescent marker method as a tool for determining the effectiveness of hospital cleaning.DesignA prospective survey study.SettingAn academic medical center.MethodsThe same 10 high-touch surfaces were tested after each terminal cleaning using (1) the fluorescent marker method, (2) the ATP assay, and (3) the ACC method. Using the fluorescent marker method under study, surfaces were classified as totally clean, partially clean, or not clean. The ACC method was used as the standard for comparison.ResultsAccording to the fluorescent marker method, of the 830 high-touch surfaces, 321 surfaces (38.7%) were totally clean (TC group), 84 surfaces (10.1%) were partially clean (PC group), and 425 surfaces (51.2%) were not clean (NC group). The TC group had significantly lower ATP and ACC values (mean ± SD, 428.7 ± 1,180.0 relative light units [RLU] and 15.6 ± 77.3 colony forming units [CFU]/100 cm2) than the PC group (1,386.8 ± 2,434.0 RLU and 34.9 ± 87.2 CFU/100 cm2) and the NC group (1,132.9 ± 2,976.1 RLU and 46.8 ± 119.2 CFU/100 cm2).ConclusionsThe fluorescent marker method provided a simple, reliable, and real-time assessment of environmental cleaning in hospitals. Our results indicate that only a surface determined to be totally clean using the fluorescent marker method could be considered clean.