Re-Developing Turbulent Boundary Layers Behind Yawed Separation Bubbles

1972 ◽  
Vol 23 (3) ◽  
pp. 211-228 ◽  
Author(s):  
H P Horton
Keyword(s):  
Energy Dissipation ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Three Dimensional ◽  
Turbulent Boundary Layers ◽  
Two Dimensional ◽  
Mean Flow ◽  
Separation Bubbles ◽  
Gradient Parameter ◽  
The Mean

SummaryMeasurements are presented of the mean flow properties of some three-dimensional turbulent boundary layers re-developing after reattachment behind short separation bubbles yawed at 26.5° to the main stream. For these measurements, Rθ11varied from about 550 to 1450. It was found that, where the pressure gradient parameter (ν/ρu3τ1)∂p/∂s was not greater than about 0.05, the flow in the local external streamline direction conformed well with empirical laws for fully-attached two-dimensional layers with regard to the mean velocity profiles, shape parameter relationships and skin friction laws, giving support to the usual assumption that these two-dimensional relationships may be applied to the streamwise flow in three-dimensional layers, subject to the limitation on the pressure gradient parameter. The cross-flow profiles, on the other hand, were not generally fitted well by the often-used representations of Mager and Johnston. The variations of the kinetic energy dissipation coefficient and the entrainment rate were deduced for one of the layers, both quantities being found to be higher than those predicted by empirical relationships for conventionally-developing two-dimensional layers. However, the energy dissipation is in fair agreement with that in a similarly re-developing two-dimensional flow.

Pressure-gradient-dependent logarithmic laws in sink flow turbulent boundary layers

2008 ◽  
Vol 615 ◽  
pp. 445-475 ◽  
Author(s):  
SHIVSAI AJIT DIXIT ◽  
O. N. RAMESH
Keyword(s):  
Differential Equations ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Turbulent Boundary Layers ◽  
Pressure Gradients ◽  
Mean Flow ◽  
Mean Velocity ◽  
Wide Range ◽  
Gradient Parameter ◽  
The Mean

Experiments were done on sink flow turbulent boundary layers over a wide range of streamwise pressure gradients in order to investigate the effects on the mean velocity profiles. Measurements revealed the existence of non-universal logarithmic laws, in both inner and defect coordinates, even when the mean velocity descriptions departed strongly from the universal logarithmic law (with universal values of the Kármán constant and the inner law intercept). Systematic dependences of slope and intercepts for inner and outer logarithmic laws on the strength of the pressure gradient were observed. A theory based on the method of matched asymptotic expansions was developed in order to explain the experimentally observed variations of log-law constants with the non-dimensional pressure gradient parameter (Δp=(ν/ρU3τ)dp/dx). Towards this end, the system of partial differential equations governing the mean flow was reduced to inner and outer ordinary differential equations in self-preserving form, valid for sink flow conditions. Asymptotic matching of the inner and outer mean velocity expansions, extended to higher orders, clearly revealed the dependence of slope and intercepts on pressure gradient in the logarithmic laws.

Transpired Turbulent Boundary Layers Subject to Forced Convection and External Pressure Gradients

2005 ◽  
Vol 127 (2) ◽  
pp. 194-198 ◽  
Author(s):  
Rau´l Bayoa´n Cal, ◽  
Xia Wang, ◽  
Luciano Castillo
Keyword(s):  
Pressure Gradient ◽  
Forced Convection ◽  
Boundary Layers ◽  
Turbulent Boundary Layers ◽  
External Pressure ◽  
Turbulent Pipe Flow ◽  
Mean Flow ◽  
Outer Flow ◽  
The Mean ◽  
Blowing Parameter

The problem of forced convection transpired turbulent boundary layers with external pressure gradient has been studied by using different scalings proposed by various researchers. Three major results were obtained: First, for adverse pressure gradient boundary layers with suction, the mean deficit profiles collapse with the free stream velocity, U∞, but into different curves depending on the strength of the blowing parameter and the upstream conditions. Second, the dependencies on the blowing parameter, the Reynolds number, and the strength of pressure gradient are removed from the outer flow when the mean deficit profiles are normalized by the Zagarola/Smits [Zagarola, M. V., and Smits, A. J., 1998, “Mean-Flow Scaling of Turbulent Pipe Flow,” J. Fluid Mech., 373, 33–79] scaling, U∞δ*/δ. Third, the temperature profiles collapse into a single curve using the new inner and outer scalings proposed by Wang and Castillo [Wang, X., and Castillo, L., 2003, “Asymptotic Solutions in Forced Convection Turbulent Boundary Layers,” J. Turbulence, 4(006)], which produce the true asymptotic profiles even at finite Pe´clet number.

Turbulent flow between a rotating and a stationary disk

2001 ◽  
Vol 426 ◽  
pp. 297-326 ◽  
Author(s):  
MAGNE LYGREN ◽  
HELGE I. ANDERSSON
Keyword(s):  
Shear Stress ◽  
Boundary Layers ◽  
Coherent Structures ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Mean Flow ◽  
Mean Velocity ◽  
Stationary Disk ◽  
Dimensional Boundary ◽  
The Mean

Turbulent flow between a rotating and a stationary disk is studied. Besides its fundamental importance as a three-dimensional prototype flow, such flow fields are frequently encountered in rotor–stator configurations in turbomachinery applications. A direct numerical simulation is therefore performed by integrating the time-dependent Navier–Stokes equations until a statistically steady state is reached and with the aim of providing both long-time statistics and an exposition of coherent structures obtained by conditional sampling. The simulated flow has local Reynolds number r2ω/v = 4 × 105 and local gap ratio s/r = 0.02, where ω is the angular velocity of the rotating disk, r the radial distance from the axis of rotation, v the kinematic viscosity of the fluid, and s the gap width.The three components of the mean velocity vector and the six independent Reynolds stresses are compared with experimental measurements in a rotor–stator flow configuration. In the numerically generated flow field, the structural parameter a1 (i.e. the ratio of the magnitude of the shear stress vector to twice the mean turbulent kinetic energy) is lower near the two disks than in two-dimensional boundary layers. This characteristic feature is typical for three-dimensional boundary layers, and so are the misalignment between the shear stress vector and the mean velocity gradient vector, although the degree of misalignment turns out to be smaller in the present flow than in unsteady three-dimensional boundary layer flow. It is also observed that the wall friction at the rotating disk is substantially higher than at the stationary disk.Coherent structures near the disks are identified by means of the λ2 vortex criterion in order to provide sufficient information to resolve a controversy regarding the roles played by sweeps and ejections in shear stress production. An ensemble average of the detected structures reveals that the coherent structures in the rotor–stator flow are similar to the ones found in two-dimensional flows. It is shown, however, that the three-dimensionality of the mean flow reduces the inter-vortical alignment and the tendency of structures of opposite sense of rotation to overlap. The coherent structures near the disks generate weaker sweeps (i.e. quadrant 4 events) than structures in conventional two-dimensional boundary layers. This reduction in the quadrant 4 contribution from the coherent structures is believed to explain the reduced efficiency of the mean flow in producing Reynolds shear stress.

Scaling of adverse-pressure-gradient turbulent boundary layers

1992 ◽  
Vol 238 ◽  
pp. 699-722 ◽  
Author(s):  
P. A. Durbin ◽  
S. E. Belcher
Keyword(s):  
Boundary Layer ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Turbulent Boundary Layers ◽  
Wall Layer ◽  
Small Range ◽  
Surface Shear Stress ◽  
Pressure Gradients ◽  
Mean Flow ◽  
The Mean

An asymptotic analysis is developed for turbulent boundary layers in strong adverse pressure gradients. It is found that the boundary layer divides into three distinguishable regions: these are the wall layer, the wake layer and a transition layer. This structure has two key differences from the zero-pressure-gradient boundary layer: the wall layer is not exponentially thinner than the wake; and the wake has a large velocity deficit, and cannot be linearized. The mean velocity profile has a y½ behaviour in the overlap layer between the wall and transition regions.The analysis is done in the context of eddy viscosity closure modelling. It is found that k-ε-type models are suitable to the wall region, and have a power-law solution in the y½ layer. The outer-region scaling precludes the usual ε-equation. The Clauser, constant-viscosity model is used in that region. An asymptotic expansion of the mean flow and matching between the three regions is carried out in order to determine the relation between skin friction and pressure gradient. Numerical calculations are done for self-similar flow. It is found that the surface shear stress is a double-valued function of the pressure gradient in a small range of pressure gradients.

Turbulent Boundary Layers Subjected to Multiple Strains

1999 ◽  
Vol 121 (3) ◽  
pp. 526-532 ◽  
Author(s):  
Andreas C. Schwarz ◽  
Michael W. Plesniak ◽  
S. N. B. Murthy
Keyword(s):  
Shear Stress ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Reynolds Shear Stress ◽  
Turbulent Boundary Layers ◽  
Laser Doppler Velocimeter ◽  
Strain Rates ◽  
The Mean ◽  
Convex Curvature ◽  
Multiple Strain Rates

Turbomachinery flows can be extremely difficult to predict, due to a multitude of effects, including interacting strain rates, compressibility, and rotation. The primary objective of this investigation was to study the influence of multiple strain rates (favorable streamwise pressure gradient combined with radial pressure gradient due to convex curvature) on the structure of the turbulent boundary layer. The emphasis was on the initial region of curvature, which is relevant to the leading edge of a stator vane, for example. In order to gain better insight into the dynamics of complex turbulent boundary layers, detailed velocity measurements were made in a low-speed water tunnel using a two-component laser Doppler velocimeter. The mean and fluctuating velocity profiles showed that the influence of the strong favorable pressure augmented the stabilizing effects of convex curvature. The trends exhibited by the primary Reynolds shear stress followed those of the mean turbulent bursting frequency, i.e., a decrease in the bursting frequency coincided with a reduction of the peak Reynolds shear stress. It was found that the effects of these two strain rates were not superposable, or additive in any simple manner. Thus, the dynamics of the large energy-containing eddies and their interaction with the turbulence production mechanisms must be considered for modeling turbulent flows with multiple strain rates.

scholarly journals On the streamwise evolution of turbulent boundary layers in arbitrary pressure gradients

2002 ◽  
Vol 461 ◽  
pp. 61-91 ◽  
Author(s):  
A. E. PERRY ◽  
IVAN MARUSIC ◽  
M. B. JONES
Keyword(s):  
Boundary Layers ◽  
Scaling Laws ◽  
Power Spectra ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Stream Velocity ◽  
Mean Flow ◽  
Mean Velocity ◽  
Law Of The Wall ◽  
The Mean

A new approach to the classic closure problem for turbulent boundary layers is presented. This involves, first, using the well-known mean-flow scaling laws such as the log law of the wall and the law of the wake of Coles (1956) together with the mean continuity and the mean momentum differential and integral equations. The important parameters governing the flow in the general non-equilibrium case are identified and are used for establishing a framework for closure. Initially closure is achieved here empirically and the potential for achieving closure in the future using the wall-wake attached eddy model of Perry & Marusic (1995) is outlined. Comparisons are made with experiments covering adverse-pressure-gradient flows in relaxing and developing states and flows approaching equilibrium sink flow. Mean velocity profiles, total shear stress and Reynolds stress profiles can be computed for different streamwise stations, given an initial upstream mean velocity profile and the streamwise variation of free-stream velocity. The attached eddy model of Perry & Marusic (1995) can then be utilized, with some refinement, to compute the remaining unknown quantities such as Reynolds normal stresses and associated spectra and cross-power spectra in the fully turbulent part of the flow.

Governing Parameters of Adverse Pressure Gradient Turbulent Boundary Layers

2018 ◽  
Author(s):  
Yvan Maciel ◽  
Tie Wei ◽  
Ayse G. Gungor ◽  
Mark P. Simens
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Outer Region ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Inertial Parameter ◽  
Velocity Scale ◽  
Gradient Parameter

We perform a careful nondimensional analysis of the turbulent boundary layer equations in order to bring out, without assuming any self-similar behaviour, a consistent set of nondimensional parameters characterizing the outer region of turbulent boundary layers with arbitrary pressure gradients. These nondimensional parameters are a pressure gradient parameter, a Reynolds number (different from commonly used ones) and an inertial parameter. They are obtained without assuming a priori the outer length and velocity scales. They represent the ratio of the magnitudes of two types of forces in the outer region, using the Reynolds shear stress gradient (apparent turbulent force) as the reference force: inertia to apparent turbulent forces for the inertial parameter, pressure to apparent turbulent forces for the pressure gradient parameter and apparent turbulent to viscous forces for the Reynolds number. We determine under what conditions they retain their meaning, depending on the outer velocity scale that is considered, with the help of seven boundary layer databases. We find the impressive result that if the Zagarola-Smits velocity is used as the outer velocity scale, the streamwise evolution of the three ratios of forces in the outer region can be accurately followed with these non-dimensional parameters in all these flows — not just the order of magnitude of these ratios. This cannot be achieved with three other outer velocity scales commonly used for pressure gradient turbulent boundary layers. Consequently, the three new nondimensional parameters, when expressed with the Zagarola-Smits velocity, can be used to follow — in a global sense — the streamwise evolution of the stream-wise mean momentum balance in the outer region. This study provides a clear and consistent framework for the analysis of the outer region of adverse-pressure-gradient turbulent boundary layers.

Mean momentum balance in moderately favourable pressure gradient turbulent boundary layers

2008 ◽  
Vol 617 ◽  
pp. 107-140 ◽  
Author(s):  
M. METZGER ◽  
A. LYONS ◽  
P. FIFE
Keyword(s):  
Pressure Gradient ◽  
Boundary Layers ◽  
Outer Region ◽  
Present Theory ◽  
Momentum Equation ◽  
Turbulent Boundary Layers ◽  
Momentum Balance ◽  
Physical Layers ◽  
Multi Scale ◽  
The Mean

Moderately favourable pressure gradient turbulent boundary layers are investigated within a theoretical framework based on the unintegrated two-dimensional mean momentum equation. The present theory stems from an observed exchange of balance between terms in the mean momentum equation across different regions of the boundary layer. This exchange of balance leads to the identification of distinct physical layers, unambiguously defined by the predominant mean dynamics active in each layer. Scaling domains congruent with the physical layers are obtained from a multi-scale analysis of the mean momentum equation. Scaling behaviours predicted by the present theory are evaluated using direct measurements of all of the terms in the mean momentum balance for the case of a sink-flow pressure gradient generated in a wind tunnel with a long development length. Measurements also captured the evolution of the turbulent boundary layers from a non-equilibrium state near the wind tunnel entrance towards an equilibrium state further downstream. Salient features of the present multi-scale theory were reproduced in all the experimental data. Under equilibrium conditions, a universal function was found to describe the decay of the Reynolds stress profile in the outer region of the boundary layer. Non-equilibrium effects appeared to be manifest primarily in the outer region, whereas differences in the inner region were attributed solely to Reynolds number effects.

Sign in / Sign up

Export Citation Format

Share Document