The Mesozoic successions of western Sierra de Zacatecas, Central Mexico: provenance and tectonic implications

2015 ◽  
Vol 153 (4) ◽  
pp. 696-717 ◽  
Author(s):  
BERLAINE ORTEGA-FLORES ◽  
LUIGI A. SOLARI ◽  
FELIPE DE JESÚS ESCALONA-ALCÁZAR
Keyword(s):  
Continental Margin ◽  
Active Tectonics ◽  
Upper Jurassic ◽  
Central Mexico ◽  
Petrographic Analysis ◽  
Continental Margins ◽  
South American ◽  
Detrital Zircon Geochronology ◽  
Sierra Madre ◽  
Active Continental Margins

AbstractCentral Mexico was subject to active tectonics related to subduction processes while it occupied a position in western equatorial Pangea during early Mesozoic time. The subduction of the palaeo-Pacific plate along the western North American and South American active continental margins produced volcanic arc successions which were subsequently rifted and re-incorporated to the continental margin. In this context, the fringing arcs are important in unravelling the continental accretionary record. Using petrographic analysis, detrital zircon geochronology and structural geology, this paper demonstrates that the Guerrero Arc (Guerrero Terrane) formed on top of a felsic volcaniclastic unit (Middle Jurassic La Pimienta Formation) and siliciclastic strata (Upper Triassic Zacatecas Formation and Arteaga Complex) of continental Mexican provenance, deposited across the continental margin and oceanic substrate. This assemblage was rifted away from continental Mexico to form an intervening oceanic assemblage (Upper Jurassic – Lower Cretaceous Las Pilas Volcanosedimentary Complex of the Arperos Basin), then accreted back more or less at the same place, all above the same east-dipping subduction zone. The accretion of the Guerrero Arc to the Mexican continental mainland (Sierra Madre Terrane) caused the deposition of a siliciclastic unit (La Escondida Phyllite), which recycled detritus from the volcaniclastic and siliciclastic underlying strata.

Morphology of the continental margin

1978 ◽  
Vol 290 (1366) ◽  
pp. 75-85 ◽  
Keyword(s):  
Continental Margin ◽  
Turbidity Currents ◽  
Continental Margins ◽  
Island Arcs ◽  
Horizontal Shear ◽  
Passive Margins ◽  
Shelf Slope ◽  
Shear Motion ◽  
Continental Shelf Slope ◽  
Active Continental Margins

The continental margin is the surface morphological expression of the deeper fundamental transition between the thick low density continental igneous crust and the thin high density and chemically different oceanic igneous crust. Covering the transition are thick sediment accumulations comprising over half the total sediments of the ocean, so that the precise morphological boundaries often differ in position from those of the deeper geology. Continental margins are classified as active or passive depending on the level of seismicity. Active continental margins are divided into two categories, based on the depth distribution of earthquakes and the tectonic regime. Active transform margins, characterized by shear and shallow focus earthquakes, result from horizontal shear motion between plates. Active compressional margins are characterized by shallow, intermediate and deep earthquakes along a dipping zone, by oceanic trenches and by volcanic island arcs or mountain ranges depending on whether the margin is oceanocean or ocean-continent. Passive margins, found in the Atlantic and Indian Oceans, are formed initially by the rifting of continental crust and mark the ocean-continent boundary within the spreading plate. They are characterized by continental shelf, slope and rise physiographic provinces. Once clear of the rifting axis, they cool and subside. Sedimentation can prograde the shelf and load the edge leading to further down warping; changes of sea level lead to erosion by wave action and by ice; ocean currents and turbidity currents redistribute sediments; slumps occur in unstable areas. The passive and sediment-starved margin west of Europe is described where the following factors have been significant: (a) faulting related to initial rifting; (b) infilling and progradation by sediments; (c) slumping; (d) contour current erosion and deposition; (e)canyon erosion.

Origin of increased terrigenous supply to the NE South American continental margin during Heinrich Stadial 1 and the Younger Dryas

2015 ◽  
Vol 432 ◽  
pp. 493-500 ◽  
Author(s):  
Yancheng Zhang ◽  
Cristiano M. Chiessi ◽  
Stefan Mulitza ◽  
Matthias Zabel ◽  
Ricardo I.F. Trindade ◽  
...  
Keyword(s):  
Continental Margin ◽  
Younger Dryas ◽  
South American

How submarine channels (re)shape continental margins

2020 ◽  
Vol 90 (11) ◽  
pp. 1581-1600
Author(s):  
Luke A. Pettinga ◽  
Zane R. Jobe
Keyword(s):  
Continental Margin ◽  
Evolution Model ◽  
Sediment Supply ◽  
Tectonic Deformation ◽  
Continental Margins ◽  
Sedimentary Processes ◽  
Submarine Channels ◽  
Active Tectonic ◽  
Tectonic Settings ◽  
Longitudinal Profiles

ABSTRACT Submarine landscapes, like their terrestrial counterparts, are sculpted by autogenic sedimentary processes toward morphologies at equilibrium with their allogenic controls. While submarine channels and nearby, inter-channel continental-margin areas share boundary conditions (e.g., terrestrial sediment supply, tectonic deformation), there are significant differences between the style, recurrence, and magnitude of their respective autogenic sedimentary processes. We predict that these process-based differences affect the rates of geomorphic change and equilibrium (i.e., graded) morphologies of submarine-channel and continental-margin longitudinal profiles. To gain insight into this proposed relationship, we document, classify (using machine learning), and analyze longitudinal profiles from 50 siliciclastic continental margins and associated submarine channels which represent a range of sediment-supply regimes and tectonic settings. These profiles tend to evolve toward smooth, lower-gradient longitudinal profiles, and we created a “smoothness” metric as a proxy for the relative maturity of these profiles toward the idealized equilibrium profile. Generally, higher smoothness values occur in systems with larger sediment supply, and the smoothness of channels typically exceeds that of the associated continental margin. We propose that the high rates of erosion, bypass, and deposition via sediment gravity flows act to smooth and mature channel profiles more rapidly than the surrounding continental margin, which is dominated by less-energetic diffusive sedimentary processes. Additionally, tectonic deformation will act to reduce the smoothness of these longitudinal profiles. Importantly, the relationship between total sediment supply and the difference between smoothness values of associated continental margins and submarine channels (the “smoothness Δ”) follows separate trends in passive and active tectonic settings, which we attribute to the variability in relative rates of smoothness development between channelized and inter-channel environments in the presence or absence of tectonic deformation. We propose two endmember pathways by which continental margins and submarine channels coevolve towards their respective equilibrium profiles with increased sediment supply: 1) Coupled Evolution Model (common in passive tectonic settings), in which the smoothness Δ increases only slightly before remaining static, and 2) Decoupled Evolution Model (common in active tectonic settings), in which the smoothness Δ increases more rapidly and to a greater final value. Our analysis indicates that the interaction of the allogenic factors of sediment supply and tectonic deformation with the autogenic sedimentary processes characteristic of channelized and inter-channel areas of the continental margin may account for much of the variability between coevolution pathways and depositional architectures.

scholarly journals Detrital zircon geochronology and provenance of the Middle to Late Jurassic Paradox Basin and Central Colorado trough: Paleogeographic implications for southwestern Laurentia

Geosphere ◽  
2021 ◽  
Author(s):  
John I. Ejembi ◽  
Sally L. Potter-McIntyre ◽  
Glenn R. Sharman ◽  
Tyson M. Smith ◽  
Joel E. Saylor ◽  
...  
Keyword(s):  
Sediment Transport ◽  
Detrital Zircon ◽  
Late Jurassic ◽  
Upper Jurassic ◽  
Morrison Formation ◽  
Detrital Zircon Geochronology ◽  
Sediment Dispersal ◽  
Paradox Basin ◽  
Southern Oklahoma ◽  
Trace Elemental

Middle to Upper Jurassic strata in the Paradox Basin and Central Colorado trough (CCT; south­western United States) record a pronounced change in sediment dispersal from dominantly aeolian deposition with an Appalachian source (Entrada Sandstone) to dominantly fluvial deposi­tion with a source in the Mogollon and/or Sevier orogenic highlands (Salt Wash Member of the Morrison Formation). An enigmatic abundance of Cambrian (ca. 527–519 Ma) grains at this prove­nance transition in the CCT at Escalante Canyon, Colorado, was recently suggested to reflect a local sediment source from the Ancestral Front Range, despite previous interpretations that local base­ment uplifts were largely buried by Middle to Late Jurassic time. This study aims to delineate spatial and tem­poral patterns in provenance of these Jurassic sandstones containing Cambrian grains within the Paradox Basin and CCT using sandstone petrog­raphy, detrital zircon U-Pb geochronology, and detrital zircon trace elemental and rare-earth ele­mental (REE) geochemistry. We report 7887 new U-Pb detrital zircon analyses from 31 sandstone samples collected within seven transects in west­ern Colorado and eastern Utah. Three clusters of zircon ages are consistently present (1.53–1.3 Ga, 1.3–0.9 Ga, and 500–300 Ma) that are interpreted to reflect sources associated with the Appalachian orogen in southeastern Laurentia (mid-continent, Grenville, Appalachian, and peri-Gondwanan terranes). Ca. 540–500 Ma zircon grains are anom­alously abundant locally in the uppermost Entrada Sandstone and Wanakah Formation but are either lacking or present in small fractions in the overlying Salt Wash and Tidwell Members of the Morrison Formation. A comparison of zircon REE geochem­istry between Cambrian detrital zircon and igneous zircon from potential sources shows that these 540–500 Ma detrital zircon are primarily magmatic. Although variability in both detrital and igneous REE concentrations precludes definitive identifica­tion of provenance, several considerations suggest that distal sources from the Cambrian granitic and rhyolitic provinces of the Southern Oklahoma aulacogen is also likely, in addition to a proximal source identified in the McClure Mountain syenite of the Wet Mountains, Colorado. The abundance of Cambrian grains in samples from the central CCT, particularly in the Entrada Sandstone and Wana­kah Formation, suggests northwesterly sediment transport within the CCT, with sediment sourced from Ancestral Rocky Mountains uplifts of the southern Wet Mountains and/or Amarillo-Wichita Mountains in southwestern Oklahoma. The lack of Cambrian grains within the Paradox Basin sug­gests that the Uncompahgre uplift (southwestern Colorado) acted as a barrier to sediment transport from the CCT.

scholarly journals Synrift sandstones and clayey rocks: bulk chemical composition and location on a number of discriminant paleogeodynamic diagrams

2019 ◽  
pp. 439-465
Author(s):  
A. V. Maslov ◽  
V. N. Podkovyrov ◽  
E. Z. Gareev ◽  
A. D. Nozhkin
Keyword(s):  
Chemical Composition ◽  
Continental Margins ◽  
Bulk Chemical Composition ◽  
East European ◽  
Fine Grained ◽  
Sedimentary Deposits ◽  
Data Points ◽  
Bulk Chemical ◽  
Clayey Rocks ◽  
Active Continental Margins

The bulk chemical composition of synrift sandstones and associated clayey rocks has been analized, and the distribution of the fields they form has been studied on discriminant paleogeodynamic SiO2K2O/Na2O [Roser, Korsch, 1986] and DF1DF2 [Verma, Armstrong-Altrin, 2013] diagrams. The studied sandstones in terms of bulk chemical composition mainly correspond to greywacke, lititic, arkose and subarkose psammites; Sublitites and quartz arenites are also found. A significant part in the analyzed data massif consists of psammites, in which log(Na2O/K2O)-1.0; missing on the Pettijohn classification chart. This confirms our conclusion, based on the results of mineralogical and petrographic studies, that the sedimentary infill of rift structures unites immature sandstones, the detrital framework of which was formed due to erosion of local sources, represented by various magmatic and sedimentary formations. Synrift clayey rocks, compared with sandstones, are composed of more mature fine-grained siliciclastics. As follows from the distribution of figurative data points of clayey rocks on the F1F2 diagram [Roser, Korsch, 1988], its sources were mainly sedimentary deposits. The content of most of the main rock-forming oxides in the synrift sandstones is almost the same as in silt-sandstone rocks present in the Upper Precambrian-Phanerozoic sedimentary mega-complex of the East European Plate, but at the same time differs significantly from the Proterozoic and Phanerozoic cratonic sediments, as well as from the average composition upper continental crust. It is shown that the distribution of the fields of syntift sandstones and clayey rocks on the SiO2K2O/Na2O diagram does not have any distinct features, and their figurative data points are localized in the areas of terrigenous rocks of passive and active continental margins. On the DF1DF2 diagram, the fields of the studied psammites and clayey rocks are located in areas of riftogenous and collisional environments. We have proposed a different position of the border between these areas in the diagram, which will require further verification.

Sign in / Sign up

Export Citation Format

Share Document