Finite Reynolds number effects in the propagation of an air finger into a liquid-filled flexible-walled channel

2000 ◽  
Vol 424 ◽  
pp. 21-44 ◽  
Author(s):  
MATTHIAS HEIL
Keyword(s):  
Reynolds Number ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Deformation Pattern ◽  
Fluid Inertia ◽  
Navier Stokes Equations ◽  
Airway Reopening ◽  
Reynolds Number Effects ◽  
Wall Deformation ◽  
Pulmonary Airway

This paper investigates finite Reynolds number effects in the problem of the propagation of an air finger into a liquid-filled flexible-walled two-dimensional channel. The study is motivated by the physiological problem of pulmonary airway reopening. A fully consistent model of the fluid–structure interaction is formulated and solved numerically using coupled finite element discretizations of the free-surface Navier–Stokes equations and the Lagrangian wall equations. It is shown that for parameter values which are representative of the conditions in the lung and in typical laboratory experiments, fluid inertia plays a surprisingly important role: even for relatively modest ratios of Reynolds and capillary numbers (Re/Ca ≈ 5–10), the pressure required to drive the air finger at a given speed increases significantly compared to the zero Reynolds number case. Fluid inertia leads to significant changes in the velocity and pressure fields near the bubble tip and is responsible for a noticeable change in the wall deformation pattern ahead of the bubble. For some parameter variations (such as variations in the wall tension), finite Reynolds number effects are shown to lead to qualitative changes in the system's behaviour. Finally, the implications of the result for pulmonary airway reopening are discussed.

Finite-Reynolds-Number Effects in Steady, Three-Dimensional Airway Reopening

2006 ◽  
Vol 128 (4) ◽  
pp. 573-578 ◽  
Author(s):  
Andrew L. Hazel ◽  
Matthias Heil
Keyword(s):  
Reynolds Number ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Elastic Tube ◽  
Navier Stokes ◽  
Fluid Inertia ◽  
Navier Stokes Equations ◽  
Airway Reopening ◽  
Reynolds Number Effects ◽  
Steady Propagation

Motivated by the physiological problem of pulmonary airway reopening, we study the steady propagation of an air finger into a buckled elastic tube, initially filled with viscous fluid. The system is modeled using geometrically non-linear, Kirchhoff-Love shell theory, coupled to the free-surface Navier-Stokes equations. The resulting three-dimensional, fluid-structure-interaction problem is solved numerically by a fully coupled finite element method. Our study focuses on the effects of fluid inertia, which has been neglected in most previous studies. The importance of inertial forces is characterized by the ratio of the Reynolds and capillary numbers, Re∕Ca, a material parameter. Fluid inertia has a significant effect on the system’s behavior, even at relatively small values of Re∕Ca. In particular, compared to the case of zero Reynolds number, fluid inertia causes a significant increase in the pressure required to drive the air finger at a given speed.

Reynolds Number Effect Investigation of Shock Wave on Supercritical Airfoil

2014 ◽  
Vol 548-549 ◽  
pp. 520-524
Author(s):  
Xin Xu ◽  
Da Wei Liu ◽  
De Hua Chen ◽  
Yuan Jing Wang
Keyword(s):  
Shock Wave ◽  
Reynolds Number ◽  
Stokes Equations ◽  
Boundary Layer Separation ◽  
Aerodynamic Characteristics ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Supercritical Airfoil ◽  
Reynolds Number Effects ◽  
Shock Location

The supercritical airfoil has been widely applied to large airplanes for sake of high aerodynamic efficiency. But at transonic speeds, the shock wave on upper surface of supercritical airfoil may induce boundary layer separation, which would change the aerodynamic characteristics. The shock characteristics such as location and intensity are sensitive to Reynolds number. In order to predict aerodynamic characteristics of supercritical airfoil exactly, the Reynolds number effects of shock wave must be investigated.The transonic flows over a typical supercritical airfoil CH were numerically simulated with two-dimensional Navier-Stokes equations, and the numerical method was validated with test results in ETW(European Transonic Windtunnel). The computation attack angles of CH airfoil varied from 0oto 8o, Mach numbers varied from 0.74 to 0.82 while Reynolds numbers varied from 3×106 to 50×106 per airfoil chord. It is obvious that shock location moves afterward and shock intensity strengthens as Reynolds number increasing. The similar curves of shock location and intensity is linear with logarithm of Reynolds number, so that the shock location and intensity at flight condition could be extrapolated from low Reynolds number.

Approximations in Hydrodynamic Lubrication

1992 ◽  
Vol 114 (1) ◽  
pp. 14-25 ◽  
Author(s):  
R. X. Dai ◽  
Q. Dong ◽  
A. Z. Szeri
Keyword(s):  
Reynolds Number ◽  
Stokes Equations ◽  
Numerical Study ◽  
Hydrodynamic Lubrication ◽  
Lubrication Theory ◽  
Navier Stokes ◽  
Fluid Inertia ◽  
Navier Stokes Equations ◽  
Number Range ◽  
Bearing Stiffness

In this numerical study of the approximations that led Reynolds to the formulation of classical Lubrication Theory, we compare results from (1) the full Navier-Stokes equations, (2) a lubrication theory relative to the “natural,” i.e., bipolar, coordinate system of the geometry that neglects fluid inertia, and (3) the classical Reynolds Lubrication Theory that neglects both fluid inertia and film curvature. By applying parametric continuation techniques, we then estimate the Reynolds number range of validity of the laminar flow assumption of classical theory. The study demonstrates that both the Navier-Stokes and the “bipolar lubrication” solutions converge monotonically to results from classical Lubrication Theory, one from below and the other from above. Furthermore the oil-film force is shown to be invariant with Reynolds number in the range 0 < R < Rc for conventional journal bearing geometry, where Rc is the critical value of the Reynolds number at first bifurcation. A similar conclusion also holds for the off-diagonal components of the bearing stiffness matrix, while the diagonal components are linear in the Reynolds number, in accordance with the small perturbation theory of DiPrima and Stuart.

A note on the solution of the Navier-Stokes equations for a spherically symmetric expansion into a very low pressure

1973 ◽  
Vol 59 (2) ◽  
pp. 391-396 ◽  
Author(s):  
N. C. Freeman ◽  
S. Kumar
Keyword(s):  
Shock Wave ◽  
Reynolds Number ◽  
Stokes Equation ◽  
Stokes Equations ◽  
Low Pressure ◽  
Navier Stokes ◽  
Spherically Symmetric ◽  
Navier Stokes Equation ◽  
Navier Stokes Equations ◽  
Type Flow

It is shown that, for a spherically symmetric expansion of a gas into a low pressure, the shock wave with area change region discussed earlier (Freeman & Kumar 1972) can be further divided into two parts. For the Navier–Stokes equation, these are a region in which the asymptotic zero-pressure behaviour predicted by Ladyzhenskii is achieved followed further downstream by a transition to subsonic-type flow. The distance of this final region downstream is of order (pressure)−2/3 × (Reynolds number)−1/3.

Free-stream coherent structures in parallel boundary-layer flows

2014 ◽  
Vol 752 ◽  
pp. 602-625 ◽  
Author(s):  
Kengo Deguchi ◽  
Philip Hall
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Coherent Structures ◽  
Free Stream ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Homotopy Continuation ◽  
Boundary Layer Flows ◽  
Navier Stokes Equations ◽  
High Reynolds

AbstractOur concern in this paper is with high-Reynolds-number nonlinear equilibrium solutions of the Navier–Stokes equations for boundary-layer flows. Here we consider the asymptotic suction boundary layer (ASBL) which we take as a prototype parallel boundary layer. Solutions of the equations of motion are obtained using a homotopy continuation from two known types of solutions for plane Couette flow. At high Reynolds numbers, it is shown that the first type of solution takes the form of a vortex–wave interaction (VWI) state, see Hall & Smith (J. Fluid Mech., vol. 227, 1991, pp. 641–666), and is located in the main part of the boundary layer. On the other hand, here the second type is found to support an equilibrium solution of the unit-Reynolds-number Navier–Stokes equations in a layer located a distance of $\def \xmlpi #1{}\def \mathsfbi #1{\boldsymbol {\mathsf {#1}}}\let \le =\leqslant \let \leq =\leqslant \let \ge =\geqslant \let \geq =\geqslant \def \Pr {\mathit {Pr}}\def \Fr {\mathit {Fr}}\def \Rey {\mathit {Re}}O(\ln \mathit{Re})$ from the wall. Here $\mathit{Re}$ is the Reynolds number based on the free-stream speed and the unperturbed boundary-layer thickness. The streaky field produced by the interaction grows exponentially below the layer and takes its maximum size within the unperturbed boundary layer. The results suggest the possibility of two distinct types of streaky coherent structures existing, possibly simultaneously, in disturbed boundary layers.

scholarly journals Nonlinear amplification in hydrodynamic turbulence

2021 ◽  
Vol 930 ◽  
Author(s):  
Kartik P. Iyer ◽  
Katepalli R. Sreenivasan ◽  
P.K. Yeung
Keyword(s):  
Reynolds Number ◽  
Isotropic Turbulence ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Developed Turbulence ◽  
Advection Term ◽  
Nonlinear Amplification

Using direct numerical simulations performed on periodic cubes of various sizes, the largest being $8192^3$ , we examine the nonlinear advection term in the Navier–Stokes equations generating fully developed turbulence. We find significant dissipation even in flow regions where nonlinearity is locally absent. With increasing Reynolds number, the Navier–Stokes dynamics amplifies the nonlinearity in a global sense. This nonlinear amplification with increasing Reynolds number renders the vortex stretching mechanism more intermittent, with the global suppression of nonlinearity, reported previously, restricted to low Reynolds numbers. In regions where vortex stretching is absent, the angle and the ratio between the convective vorticity and solenoidal advection in three-dimensional isotropic turbulence are statistically similar to those in the two-dimensional case, despite the fundamental differences between them.

scholarly journals Numerical Simulation of Slip effect on Lid-Driven Cavity Flow Problem for High Reynolds Number: Vorticity – Stream Function Approach

2021 ◽  
Vol 8 (3) ◽  
pp. 418-424
Author(s):  
Syed Fazuruddin ◽  
Seelam Sreekanth ◽  
G. Sankara Sekhar Raju
Keyword(s):  
Reynolds Number ◽  
Stream Function ◽  
Stokes Equations ◽  
Cavity Flow ◽  
Partial Slip ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Driven Cavity ◽  
Slip Conditions ◽  
Driven Cavity Flow

Incompressible 2-D Navier-stokes equations for various values of Reynolds number with and without partial slip conditions are studied numerically. The Lid-Driven cavity (LDC) with uniform driven lid problem is employed with vorticity - Stream function (VSF) approach. The uniform mesh grid is used in finite difference approximation for solving the governing Navier-stokes equations and developed MATLAB code. The numerical method is validated with benchmark results. The present work is focused on the analysis of lid driven cavity flow of incompressible fluid with partial slip conditions (imposed on side walls of the cavity). The fluid flow patterns are studied with wide range of Reynolds number and slip parameters.

An Implicit Multigrid Scheme for the Compressible Navier-Stokes Equations With Low-Reynolds-Number Turbulence Closure

1998 ◽  
Vol 120 (2) ◽  
pp. 257-262 ◽  
Author(s):  
Peter Gerlinger ◽  
Dieter Bru¨ggemann
Keyword(s):  
Reynolds Number ◽  
Stokes Equations ◽  
Low Reynolds Number ◽  
Convergence Acceleration ◽  
Iterative Solvers ◽  
Turbulence Closure ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Low Reynolds ◽  
Turbulence Transport

A multigrid method for convergence acceleration is used for solving coupled fluid and turbulence transport equations. For turbulence closure a low-Reynolds-number q-ω turbulence model is employed, which requires very fine grids in the near wall regions. Due to the use of fine grids, convergence of most iterative solvers slows down, making the use of multigrid techniques especially attractive. However, special care has to be taken on the strong nonlinear turbulent source terms during restriction from fine to coarse grids. Due to the hyperbolic character of the governing equations in supersonic flows and the occurrence of shock waves, modifications to standard multigrid techniques are necessary. A simple and effective method is presented that enables the multigrid scheme to converge. A strong reduction in the required number of multigrid cycles and work units is achieved for different test cases, including a Mack 2 flow over a backward facing step.

Sign in / Sign up

Export Citation Format

Share Document