The structure of cubic MOF [{Ca(H2O)6}{CaGd(oxydiacetate)3}2].4H2O. A comparison between structural models obtained from Rietveld refinement of conventional and synchrotron X-ray powder diffraction data and standard refinement of single-crystal X-ray diffraction data

2012 ◽  
Vol 27 (4) ◽  
pp. 232-242 ◽  
Author(s):  
Leopoldo Suescun ◽  
Jun Wang ◽  
Ricardo Faccio ◽  
Guzmán Peinado ◽  
Julia Torres ◽  
...  

The structure of the metal–organic framework (MOF) compound [{Ca(H2O)6}{CaGd(oxydiacetate)3}2]·4H2O was determined by single-crystal X-ray diffraction and refined using conventional single-crystal X-ray diffraction data. In addition, the structure was refined using powder diffraction data collected from two sources, a conventional X-ray diffractometer in Bragg–Brentano geometry and a 12-detector high resolution synchrotron-based diffractometer in transmission geometry. Data from the latter were processed in three different ways to account for crystalline decay or radiation damage. One dataset was obtained by averaging the multiple detector patterns, another dataset was obtained by cutting the non-overlapping portions of each detector to consider only the first few minutes of data collection and a dose-corrected dataset was obtained by fitting the independent peaks in every dataset and extrapolating the intensity and peak position to the initial time of data collection or to zero-absorbed dose. The compared structural models obtained show that special processing of powder diffraction data produced a much accurate model, close to the single-crystal-based model for this particular compound with heavy atoms in high symmetry positions that do not contribute to a significant number of diffraction intensities.

1997 ◽  
Vol 53 (6) ◽  
pp. 861-869 ◽  
Author(s):  
C. D. Ling ◽  
J. G. Thompson ◽  
S. Schmid ◽  
D. J. Cookson ◽  
R. L. Withers

The structures of the layered intergrowth phases SbIIISb^{\rm V}_xAl-xTiO6 (x \simeq 0, A = Ta, Nb) have been refined by the Rietveld method, using X-ray diffraction data obtained using a synchrotron source. The starting models for these structures were derived from those of Sb^{\rm III}_3Sb^{\rm V}_xA 3−xTiO14 (x = 1.26, A = Ta and x = 0.89, A = Nb), previously solved by single-crystal X-ray diffraction. There were no significant differences between the derived models and the final structures, validating the approach used to obtain the models and confirming that the n = 1 and n = 3 members of the family, Sb^{\rm III}_nSb^{\rm V}_xA n−xTiO4n+2 are part of a structurally homologous series.


Author(s):  
Michel Fleck ◽  
Ekkehart Tillmanns ◽  
Ladislav Bohatý ◽  
Peter Held

AbstractThe crystal structures of eight different L-malates have been determined and refined from single-crystal X-ray diffraction data. The compounds are the monoclinic (space groupIn addition, for all the compounds, powder diffraction data were collected, analysed and submitted to the powder diffraction file (PDF).


2014 ◽  
Vol 70 (a1) ◽  
pp. C1442-C1442
Author(s):  
Karthikeyan Natarajan ◽  
Sathya Duraisamy ◽  
Sivakumar Kandasamy

X -ray diffraction becomes a routine process these decades for determining crystal structure of the materials. Most of the crystal structures solved nowadays is based on single crystal X-ray diffraction because it solves the crystal and molecular structures from small molecules to macro molecules without much human intervention. However it is difficult to grow single crystals of sufficient size and quality for conventional single-crystal X-ray diffraction studies. In such cases it becomes essential that structural information can be determined from powder diffraction data. With the recent developments in the direct-space approaches for structure solution, ab initio crystal structure analysis of molecular solids can be accomplished from X-ray powder diffraction data. It should be recalled that crystal structure determination from laboratory X-ray powder diffraction data is a far more difficult task than that of its single-crystal counterpart, particularly when the molecule possesses considerable flexibility or there are multiple molecules in the asymmetric unit. Salicylic acid and its derivatives used as an anti-inflammatory drug are known for its numerous medicinal applications. In our study, we synthesized mononuclear copper (II) complex of salicylate derivative. The structural characterization of the prepared compound was carried out using powder X-ray diffraction studies. Crystal structure of the compound has been solved by direct-space approach and refined by a combination of Rietveld method using TOPAS Academic V4.1. Density Functional Theory (DFT) calculations have to be carried in the solid state for the compound using GaussianW9.0 in the frame work of a generalized-gradient approximation (GGA). The geometry optimization was to be performed using B3LYP density functional theory. The atomic coordinates were taken from the final X-ray refinement cycle.


2000 ◽  
Vol 15 (2) ◽  
pp. 130-133 ◽  
Author(s):  
N. Subramanian ◽  
N. V. Chandra Shekar ◽  
P. Ch. Sahu ◽  
Mohammad Yousuf ◽  
K. Govinda Rajan

This paper presents the powder X-ray diffraction data of BaFI recorded using a Guinier diffractometer and Mo Kα1 radiation. BaFI stabilizes at standard temperature of 25 °C and standard-atmospheric pressure (STP) in the tetragonal structure (space group P4/nmm; No. 129) with lattice parameters a=4.660(1) Å and c=7.960(5) Å. Our observed pattern is different from the existing observed powder diffraction data reported in the PDF files 34-716 (Beck, 1976) and 31-139 (), but matches almost perfectly with the pattern calculated by us from the reported single crystal data ( and with the calculated data available in PDF file 70-0481. Further, our data provide a number of new Bragg peaks extending beyond the range of d values available in the existing PDF files.


1996 ◽  
Vol 11 (1) ◽  
pp. 26-27 ◽  
Author(s):  
Irena Georgieva ◽  
Ivan Ivanov ◽  
Ognyan Petrov

A new compound—Ba3MnSi2O8 in the system BaO–MnO–SiO2 was synthesized and studied by powder X-ray diffraction. The compound is hexagonal, space group—P6/mmm, a=5.67077 Å, c=7.30529 Å, Z=1, Dx=5.353. The obtained powder X-ray diffractometry (XRD) data were interpreted by the Powder Data Interpretation Package.


2015 ◽  
Vol 30 (3) ◽  
pp. 293-293 ◽  
Author(s):  
Qing Wang ◽  
Ying Xiao ◽  
Jia Wei He ◽  
Hui Li

X-ray powder diffraction data for 3,3-dichloro-1-(4-nitrophenyl)-2-piperidinone, C11H10Cl2N2O3, are reported [a = 11.088(4) Å, b = 11.594(5) Å, c = 12.689(3) Å, α = 118.456(1)°, β = 100.320(3)°, γ = 107.763(3)°, V = 1259.27 Å3, Z = 4 and space group P-1 ]. All measured lines were indexed and are consistent with the P-1 space group. No detectable impurities were observed.


2008 ◽  
Vol 23 (4) ◽  
pp. 356-359 ◽  
Author(s):  
B. Grushko ◽  
D. Pavlyuchkov

Ternary Al–Cu–Ir phases, isostructural to the Al–Cu–Rh ω and C2 phases, were found to be around the Al70Cu20Ir10 and Al60Cu15Ir25 compositions, respectively. Using powder X-ray diffraction, the former was found to have a tetragonal structure (space group P4/mnc) with a=6.4142(9) Å and c=14.842(4) Å, and the latter has a cubic structure (space group Fm3) with a=15.3928(6) Å.


2010 ◽  
Vol 163 ◽  
pp. 173-176
Author(s):  
Lucjan Pająk ◽  
E. Olszewska ◽  
Stanislaw Pikus ◽  
Grzegorz Dercz ◽  
Józef Rasek

In the present work X-ray studies were performed on annealed Fe78Nb2B20 amorphous alloy prepared by melt-spinning technique. All the samples were annealed in vacuum for 1 hour at temperatures up to 800°C. For the studied alloy -Fe and Fe2B are the stable, crystalline phases. The -Fe crystallized as the first crystalline phase in the sample annealed at 350°C. On the other hand, metastable Fe3B phase appeared to be stable during annealing in 425-800°C temperature range. The best fitting of the experimental X-ray data to as jet available ICDD files was obtained for Ni3P type structure (39-1315 – S.G.: I (82)). New, experimental powder diffraction data for metastable Fe3B phase prepared according to ICDD standards were elaborated for the sample annealed at 600°C. For this sample the best agreement between the calculated values of lattice constants and positions of experimental diffraction lines was obtained. The X-ray data were collected using X-Pert Philips diffractometer equipped with curved graphite monochromator on diffracted beam. The Treor program was applied for the analysis of X-ray diffraction data.


2020 ◽  
Vol 35 (4) ◽  
pp. 282-285
Author(s):  
Zhicheng Zha ◽  
Ting Tang ◽  
Xiaoyan Bian ◽  
Qing Wang

X-ray powder diffraction data for estra-4,9-diene-3,17-dione, C18H22O2, are reported [a = 9.236(7) Å, b = 10.294(4) Å, c = 15.471(1) Å, unit cell volume V = 1471.11 Å3, Z = 4, and space group P212121]. All measured lines were indexed and are consistent with the P212121 space group. No detectable impurities were observed. The single-crystallographic data of the compound are also reported [a = 9.2392(7) Å, b = 10.2793(5) Å, c = 15.4822(7) Å, unit cell volume V = 1470.37(15) Å3, Z = 4, and space group P212121]. Both single-crystal and powder diffraction methods can get the similar structure data.


1996 ◽  
Vol 11 (1) ◽  
pp. 7-8 ◽  
Author(s):  
Hee-Lack Choi ◽  
Nobuo Ishizawa ◽  
Naoya Enomoto ◽  
Zenbe-e Nakagawa

X-ray powder-diffraction data for Pb2(C2O4)(NO3)2·2H2O were obtained. The crystal system was determined to be monoclinic. The unit-cell parameters were refined to a=10.613(2) Å, b=7.947(2) Å, c=6.189(1) Å, and β=104.48(2)°.


Sign in / Sign up

Export Citation Format

Share Document