scholarly journals Shock-induced star cluster formation in colliding galaxies

2010 ◽  
Vol 6 (S270) ◽  
pp. 483-486 ◽  
Author(s):  
Takayuki R. Saitoh ◽  
Hiroshi Daisaka ◽  
Eiichiro Kokubo ◽  
Junichiro Makino ◽  
Takashi Okamoto ◽  
...  

AbstractWe studied the formation process of star clusters using high-resolutionN-body/smoothed particle hydrodynamics simulations of colliding galaxies. The total number of particles is 1.2×108for our high resolution run. The gravitational softening is 5 pc and we allow gas to cool down to ~10 K. During the first encounter of the collision, a giant filament consists of cold and dense gas found between the progenitors by shock compression. A vigorous starburst took place in the filament, resulting in the formation of star clusters. The mass of these star clusters ranges from 105−8M⊙. These star clusters formed hierarchically: at first small star clusters formed, and then they merged via gravity, resulting in larger star clusters.

2020 ◽  
Vol 10 (8) ◽  
pp. 2954 ◽  
Author(s):  
Anping Shu ◽  
Shu Wang ◽  
Matteo Rubinato ◽  
Mengyao Wang ◽  
Jiping Qin ◽  
...  

Dam-break flows may change into debris flows if certain conditions are satisfied, such as abundant loose material and steep slope. These debris flows are typically characterized by high density and can generate strong impact forces. Due to the complexity of the materials that they are made of, it has always been very challenging to numerically simulate these phenomena and accurately reproduce experimentally debris flows’ processes. Therefore, to fill this gap, the formation-movement processes of debris flows induced by dam-break were simulated numerically, modifying the existing smoothed particle hydrodynamics (SPH) method. By comparing the shape and the velocity of dam break debris flows under different configurations, it was found that when simulating the initiation process, the number of particles in the upstream section is overestimated while the number of particles in the downstream area is underestimated. Furthermore, the formation process of dam-break debris flow was simulated by three models which consider different combinations of the viscous force, the drag force and the virtual mass force. The method taking into account all these three kinds of interface forces produced the most accurate outcome for the numerical simulation of the formation process of dam-break debris flow. Finally, it was found that under different interface force models, the particle velocity distribution did not change significantly. However, the direction of the particle force changed, which is due to the fact that the SPH model considers generalized virtual mass forces, better replicating real case scenarios. The modalities of dam failures have significant impacts on the formation and development of debris flows. Therefore, the results of this study will help authorities to select safe sites for future rehabilitation and relocation projects and can also be used as an important basis for debris flow risk management. Future research will be necessary to understand more complex scenarios to investigate mechanisms of domino dam-failures and their effects on debris flows propagation.


Author(s):  
So-Hyun Park ◽  
Young Beom Jo ◽  
Eung Soo Kim

Abstract Fuel Coolant Interaction (FCI), one of the critical phenomena in severe accident, involves a variety of physical phenomena including the interaction between coolant and fuel of high temperature. Especially, the jet break-up of a pre-mixing phase that the bulk of molten fuel breaks into the droplet is important for the accident progression. Understanding the intricate physics of jet break-up is essential to reduce the uncertainties of FCI and to mitigate severe accident. In this study, we have developed Lagrangian-based CFD code (named as SOPHIA) using Smoothed Particle Hydrodynamics (SPH) method, which has an advantage on handling the complicated interfacial behaviors, large deformation and multiphase flow. Furthermore, the SOPHIA code is parallelized on the multi-GPUs to achieve high-resolution and large-scale simulation that enhance the accuracy and practical applicability. Using the multi-GPU based SOPHIA code, this study simulates the benchmark jet breakup experiments in high resolution and three dimensions. The simulation results are compared with the experimental data both qualitatively and quantitatively. As a results, they shows a good agreement, and furthermore, three dimensional high resolution simulation is confirmed to resolve the physical features of jet breakup accurately by taking account into the multi-fluids interactions between jet-pool-air.


2009 ◽  
Author(s):  
P. Lorén-Aguilar ◽  
J. Isern ◽  
E. García-Berro ◽  
Kerstin E. Kunze ◽  
Marc Mars ◽  
...  

2019 ◽  
Vol 7 (8) ◽  
pp. 247 ◽  
Author(s):  
Andi Trimulyono ◽  
Hirotada Hashimoto ◽  
Akihiko Matsuda

This study aimed to validate the single-phase and two-phase smoothed particle hydrodynamics (SPH) on sloshing in a tank. There have been many studies on sloshing in tanks based on meshless particle methods, but few researchers have used a large number of particles because there is a limitation on the total number of particles when using only CPUs. Additionally, few studies have investigated the influence of air phase on tank sloshing based on two-phase SPH. In this study, a dedicated sloshing experiment was conducted at the National Research Institute of Fishing Engineering using a prismatic tank with a four-degrees-of-freedom forced oscillation machine. Three pressure gauges were used to measure local pressure near the corners of the tank. The sloshing experiment was repeated for two different filling ratios, amplitudes, and frequencies of external oscillation. Next, a GPU-accelerated three-dimensional SPH simulation of sloshing was performed using the same conditions as the experiment with a large number of particles. Lastly, two-dimensional sloshing simulations based on single-phase and two-phase SPH were carried out to determine the importance of the air phase in terms of tank sloshing. Based on systematic comparisons of the single-phase SPH, two-phase SPH, and experimental results, this paper presents a detailed discussion of the role of air-phase in terms of sloshing. The currently achievable accuracy when using SPH is demonstrated together with a few sensitivity analyses of SPH parameters.


2008 ◽  
Vol 96 (6) ◽  
pp. 263-268 ◽  
Author(s):  
E. Mounif ◽  
V. Bellenger ◽  
A. Ammar ◽  
R. Ata ◽  
P. Mazabraud ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document