Immobilized Clostridium beijerinckii TISTR 1461 was used to enhance the butanol production efficiency from sugarcane molasses. Lotus stalk (LS) pieces were used as carriers for cell immobilization. Sugarcane molasses containing 50 g/L of sugar supplemented with 1 g/L of yeast extract was found to be an appropriate medium for bacterial cell immobilization on the LS pieces. Carrier size (4, 12 and 20 mm in length) and carrier loading (1:15, 1:30 and 1:45, w/v) were optimized for high levels of butanol production using response surface methodology (RSM). The batch fermentation was carried out under anaerobic conditions in 1 L screw-capped bottles at 37 °C and an agitation rate of 150 rpm. It was found that the optimum conditions for the butanol production were the carrier size of 4 mm and carrier loading of 1:31 (w/v). Under these conditions, the butanol concentration (PB) was 12.89 g/L, corresponding to the butanol productivity (QB) of 0.36 g/L∙h and butanol yield (YB/S) of 0.36 g/g. These values were higher than those using free cells (PB, 10.20 g/L, QB, 0.28 g/L∙h and YB/S, 0.32 g/g). In addition, it was found that a 24 h incubation time for cell immobilization was appropriate for the immobilization process, which was confirmed by the results of the scanning electron microscope (SEM) and atomic force microscopy (AFM) images and specific surface area measurement. When the fermentation using the immobilized cells was carried out in a stirred-tank reactor (STR), column reactor (CR) and CR coupled with STR, the results showed that all reactors could be used to produce butanol production from the immobilized cells on LS pieces. However, the PB using CR and CR coupled with STR were only 75% and 45% of those using the screw-capped bottle and STR.
How Carrier Size and Valency Modulate Receptor-Mediated Signaling: Understanding the Link between Binding and Endocytosis of ICAM-1-Targeted Carriers
