In this research, hydroxyapatite (HA)–chitosan–titania nanocomposite coatings were formed on 316 L stainless steel using electrophoretic deposition (EPD) from alcoholic (methanol and ethanol) suspensions containing 0.5 g/L chitosan and 2 and 5 g/L HA and 2 and 5 g/L Titania. The effect of different parameters on the deposition rate, morphology, and corrosion resistance of the coatings in simulated body fluid (SBF) at 37 °C has been studied. The coatings’ properties were investigated using Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM). Based on the results of this work, it was found that the deposition rate in ethanolic suspensions is lower than methanolic ones. Moreover, the coating surface was smoother when the ethanol was used as a solvent in suspensions in comparison to the ones where methanol was the solvent. The coating deposited from a suspension containing 0.5 g/L chitosan, 2 g/L HA, and 5 g/L titania with ethanol as solvent had the highest corrosion resistance in SBF at 37 °C.
This work aims preparation of Ni-based nanocomposite coating by electroless deposition method onto stainless steel (316L) substrate, the present work will compare the effects of incorporation of ZrO2 nanoparticles at different percentages (1.25 wt %, 2.25 wt %, and 4.25 wt %) Ni-based electroless deposition coating of the bath nanocomposite on the phase structure, microhardness, and corrosion resistance is studied. Where the structure and chemical composition of nanocomposite coatings were studied by using (X-ray), (SEM) and (EDS). of Ni - ZrO2 nanocomposite coating exhibits much-increased microhardness and remarkably improved corrosion resistance.
Abstract
Type HW is a nickel-base alloy containing chromium and iron. It is austenitic, non-magnetic, and has exceptionally high resistance to corrosion, cyclic heating, and oxidation. It is of the 60 Ni-12Cr type alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Ni-37. Producer or source: Stainless steel foundries. Revised as Alloy Digest Ni-449, April 1994.
Abstract
Ugima 440 HM is a general-purpose, corrosion resistant austenitic stainless steel with added molybdenum (300 series with 2–2.5% Mo). It features improved machinability compared with 4404 or 316L. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1156. Producer or source: Schmolz + Bickenbach USA Inc..
Abstract
Carpenter CTS-BD30P alloy is a powder metal processed, air-hardening, martensitic stainless steel that offers corrosion resistance comparable with Type 440C stainless, combined with excellent toughness and wear resistance attributed to a high concentration of vanadium carbides. The Carpenter CTS family of alloys is used for many blade applications. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance as well as heat treating and powder metal forms. Filing Code: SS-1154. Producer or source: Carpenter Specialty Alloys.
Abstract
ATI 441 is a low-carbon and low-nitrogen ferritic stainless steel with 18 Cr and columbium. The alloy is typically used for exhaust system components. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming. Filing Code: SS-1150. Producer or source: Allegheny Technologies Inc..
Abstract
ATI 409HP (UNS S40900) ferritic stainless steel was introduced by ATI Allegheny Ludlum to provide improved oxidation and corrosion resistance for automotive exhaust systems in comparison to carbon steel. The alloy was designated "MF-1", indicating its end use: automotive mufflers. The good fabricability of this alloy, combined with its basic corrosion resistance and economy have significantly broadened the utility of ATI 409HP stainless steel. ATI 409HP consists of four grades: UNS S40900, S40910, S40920, and S40930. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, machining, and joining. Filing Code: SS-1135. Producer or source: Allegheny Technologies Inc..
Abstract
Kubota Alloy HD (UNS J93005) is a heat-resisting stainless steel casting alloy suitable for long-term service at temperatures up to 1095 deg C (2000 deg F). The nearest wrought equivalent is type 327. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on corrosion resistance as well as casting and joining. Filing Code: SS-1110. Producer or source: Kubota Metal Corporation, Fahramet Division.
Abstract
Allegheny Ludlum Type 420 is a hardenable, straight-chromium stainless steel with wear and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SS-801. Producer or source: Allegheny Ludlum Corporation.
Electrophoretic Deposition of Hydroxyapatite–Chitosan–Titania on Stainless Steel 316 L
