Traffic Optimization: A New Way for Air Pollution Control in China’s Urban Areas

2012 ◽  
Vol 46 (11) ◽  
pp. 5660-5661 ◽  
Author(s):  
Liu Huan ◽  
He Kebin
1973 ◽  
Vol 13 (1) ◽  
pp. 125
Author(s):  
Hanns F. Hartmann

The gases comprising the atmosphere are in dynamic balance both with the oceans and the dry land of the continents. The mechanisms which operate to keep the atmospheric content of oxygen, nitrogen, carbon and sulphur constant are now well defined. The capacity of the system to absorb excess gaseous impurities is adequate on a global basis with the exception of carbon dioxide.Air pollution is thus a local problem resulting from the overloading of a particular air space with contaminants. The greater part of air pollution is due to the combustion of fossil fuels. Ease of control and virtual freedom from sulphur give natural gas an advantage over liquid and solid fuels as far as air pollution control is concerned. Oxides of nitrogen are produced when natural gas is burned but in smaller quantities than in the combustion of other fuels. In high capacity industrial gas burners where oxides of nitrogen may be generated in large quantities control is easier and can achieve a lower level of oxides of nitrogen than is the case with other fuels.The large scale use of natural gas to solve the air pollution problems of Pittsburgh, Los Angeles and many other cities is proof of the usefulness of gas in this respect. Specialised applications include use in incinerators and industrial after burners. Advances in removal of impurities from fuels and of air pollutants from products of combustion combined with rising gas prices will in time displace gas from its preeminent position in air pollution control. It is, however, likely to retain its advantage in small installations and in dense urban areas. In public and private transport its use will probably remain limited.While technological developments in the distant future may eventually displace fossil fuels, gas will have a large share of the fuel market until that day comes and will contribute effectively to the control of air pollution.


Atmosphere ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 32
Author(s):  
Ana R. Gamarra ◽  
Yolanda Lechón ◽  
Marta G. Vivanco ◽  
Juan Luis Garrido ◽  
Fernando Martín ◽  
...  

This paper aims to provide scientific support for decision-making in the field of improving air quality by evaluating pollution reduction measures included in the current Spanish policy framework of the 1st National Air Pollution Control Program (NAPCP). First, the health impacts of air quality are estimated by using the concentrations estimated by multiscale air quality modeling and the recommended concentration–response functions (CRF), specifically as a result of exposure to particulate matter (PM), nitrogen dioxide (NO2), and ozone (O3). Second, the associated external costs are calculated by monetization techniques. Two scenarios are analyzed: a package including existing measures (WM2030) and a package with additional measures (WAM2030). Compared with the baseline scenario, an improvement was found in the health effects of NO2, PM10, and PM2.5, while for O3 there was a slight worsening, mainly due to the increase in the O3 metric used (SOMO35), which increases over some urban areas. Despite this, the monetary valuation of the total effects on health as a whole shows external benefits due to the adoption of measures (WM2030), compared with the reference scenario (no measures) of more than € 17.5 billion and, when considering the additional measures (WAM2030), benefits of about € 58.1 billion.


2020 ◽  
Vol 4 (1) ◽  
pp. 17
Author(s):  
Saisantosh Vamshi Harsha Madiraju ◽  
Ashok Kumar

Transportation sources are a major contributor to air pollution in urban areas. The role of air quality modeling is vital in the formulation of air pollution control and management strategies. Many models have appeared in the literature to estimate near-field ground level concentrations from mobile sources moving on a highway. However, current models do not account explicitly for the effect of wind shear (magnitude) near the ground while computing the ground level concentrations near highways from mobile sources. This study presents an analytical model based on the solution of the convective-diffusion equation by incorporating the wind shear near the ground for gaseous pollutants. The model input includes emission rate, wind speed, wind direction, turbulence, and terrain features. The dispersion coefficients are based on the near field parameterization. The sensitivity of the model to compute ground level concentrations for different inputs is presented for three different downwind distances. In general, the model shows Type III sensitivity (i.e., the errors in the input will show a corresponding change in the computed ground level concentrations) for most of the input variables. However, the model equations should be re-examined for three input variables (wind velocity at the reference height and two variables related to the vertical spread of the plume) to make sure that that the model is valid for computing ground level concentrations.


Sign in / Sign up

Export Citation Format

Share Document