Femtosecond Mid-Infrared Study of the Reorientation of Weakly Hydrogen-Bonded Water Molecules

2014 ◽  
Vol 118 (28) ◽  
pp. 8179-8189 ◽  
Author(s):  
Sietse T. van der Post ◽  
Huib J. Bakker
1984 ◽  
Vol 62 (5) ◽  
pp. 958-966 ◽  
Author(s):  
Sylvio Quezado ◽  
Jan C. T. Kwak ◽  
Michael Falk

We have studied the infrared spectra of Nafion membranes in twenty different cationic forms, in order to characterize the water–anion–cation interactions at low water contents. Spectra in the OH stretching region and in the H—O—H bending region allow the distinction between hydrogen-bonded and non-hydrogen-bonded water molecules, and yield information on the mode of attachment of water molecules to the anion–cation pairs. When there is a good match between the Lewis acid strength of the cation and the Lewis base strength of the anion, ion pairs are relatively stable and water molecules tend to attach on the outside. When the acid strength of the cation and the base strength of the anion are mismatched, as is the case for small cations of high charge or for large cations of low charge, water molecules tend to be inserted between the ion pairs even at the lowest water contents.


2012 ◽  
Vol 68 (4) ◽  
pp. o1204-o1204 ◽  
Author(s):  
Sanaz Khorasani ◽  
Manuel A. Fernandes

In the title hydrated salt, C8H18N+·C4H5O4−·H2O, the cyclooctyl ring of the cation is disordered over two positions in a 0.833 (3):0.167 (3) ratio. The structure contains various O—H.·O and N—H...O interactions, forming a hydrogen-bonded layer of molecules perpendicular to thecaxis. In each layer, the ammonium cation hydrogen bonds to two hydrogen succinate anions and one water molecule. Each hydrogen succinate anion hydrogen bonds to neighbouring anions, forming a chain of molecules along thebaxis. In addition, each hydrogen succinate anion hydrogen bonds to two water molecules and the ammonium cation.


2006 ◽  
Vol 463 (2) ◽  
pp. 641-646 ◽  
Author(s):  
H. Bouy ◽  
N. Huélamo ◽  
E. L. Martín ◽  
D. Barrado y Navascués ◽  
M. Sterzik ◽  
...  

2015 ◽  
Vol 71 (3) ◽  
pp. 222-228 ◽  
Author(s):  
Mohamed Abdellatif Bensegueni ◽  
Aouatef Cherouana ◽  
Slimane Dahaoui

Two alkaline earth–tetrazole compounds, namelycatena-poly[[[triaquamagnesium(II)]-μ-5,5′-(azanediyl)ditetrazolato-κ3N1,N1′:N5] hemi{bis[μ-5,5′-(azanediyl)ditetrazolato-κ3N1,N1′:N2]bis[triaquamagnesium(II)]} monohydrate], {[Mg(C2HN9)(H2O)3][Mg2(C2HN9)2(H2O)6]0.5·H2O}n, (I), and bis[5-(pyrazin-2-yl)tetrazolate] hexaaquamagnesium(II), (C5H3N6)[Mg(H2O)6], (II), have been prepared under hydrothermal conditions. Compound (I) is a mixed dimer–polymer based on magnesium ion centres and can be regarded as the first example of a magnesium–tetrazolate polymer in the crystalline form. The structure shows a complex three-dimensional hydrogen-bonded network that involves magnesium–tetrazolate dimers, solvent water molecules and one-dimensional magnesium–tetrazolate polymeric chains. The intrinsic cohesion in the polymer chains is ensured by N—H...N hydrogen bonds, which formR22(7) rings, thus reinforcing the propagation of the polymer chain along theaaxis. The crystal structure of magnesium tetrazole salt (II) reveals a mixed ribbon of hydrogen-bonded rings, of typesR22(7),R22(9) andR24(10), running along thecaxis, which are linked byR24(16) rings, generating a 4,8-cflunet.


Author(s):  
Nives Politeo ◽  
Mateja Pisačić ◽  
Marijana Đaković ◽  
Vesna Sokol ◽  
Boris-Marko Kukovec

A 6-chloronicotinate (6-Clnic) salt of a one-dimensional cationic nickel(II) coordination polymer with 4,4′-bipyridine (4,4′-bpy), namely, catena-poly[[[tetraaquanickel(II)]-μ-4,4′-bipyridine-κ2 N:N′] bis(6-chloronicotinate) tetrahydrate], {[Ni(C10H8N2)(H2O)4](C6H3ClNO2)2·4H2O} n or {[Ni(4,4′-bpy)(H2O)4](6-Clnic)2·4H2O} n , (1), was prepared by the reaction of nickel(II) sulfate heptahydrate, 6-chloronicotinic acid and 4,4′-bipyridine in a mixture of water and ethanol. The molecular structure of 1 comprises a one-dimensional polymeric {[Ni(4,4′-bpy)(H2O)4]2+} n cation, two 6-chloronicotinate anions and four water molecules of crystallization per repeating polymeric unit. The nickel(II) ion in the polymeric cation is octahedrally coordinated by four water molecule O atoms and by two 4,4′-bipyridine N atoms in the trans position. The 4,4′-bipyridine ligands act as bridges and, thus, connect the symmetry-related nickel(II) ions into an infinite one-dimensional polymeric chain extending along the b-axis direction. In the extended structure of 1, the polymeric chains of {[Ni(4,4′-bpy)(H2O)4]2+} n , the 6-chloronicotinate anions and the water molecules of crystallization are assembled into an infinite three-dimensional hydrogen-bonded network via strong O—H...O and O—H...N hydrogen bonds, leading to the formation of the representative hydrogen-bonded ring motifs: tetrameric R 2 4(8) and R 4 4(10) loops, a dimeric R 2 2(8) loop and a pentameric R 4 5(16) loop.


2012 ◽  
Vol 68 (8) ◽  
pp. o2357-o2357 ◽  
Author(s):  
María-Guadalupe Hernández Linares ◽  
Sylvain Bernès ◽  
Marcos Flores-Alamo ◽  
Gabriel Guerrero-Luna ◽  
Anselmo A. Martínez-Gallegos

Diosgenin [or (22R,25R)-spirost-5-en-3β-ol] is the starting material of the Marker degradation, a cheap semi-synthesis of progesterone, which has been designated as an International Historic Chemical Landmark. Thus far, a single X-ray structure for diosgenin is known, namely its dimethyl sulfoxide solvate [Zhanget al.(2005).Acta Cryst.E61, o2324–o2325]. We have now determined the structure of the hemihydrate, C27H42O3·0.5H2O. The asymmetric unit contains two diosgenin molecules, with quite similar conformations, and one water molecule. Hydroxy groups in steroids and water molecules form O—H...O hydrogen-bondedR54(10) ring motifs. Fused edge-sharingR(10) rings form a backbone oriented along [100], which aggregates the diosgenin molecules in the crystal structure.


2007 ◽  
Vol 63 (11) ◽  
pp. m2834-m2834
Author(s):  
Zhao-Peng Deng ◽  
Shan Gao ◽  
Li-Hua Huo ◽  
Hui Zhao

The CdII atom in the title salt, (C18H20N4)[CdCl2(C8H5O3)2]·2H2O, lies on a twofold rotation axis. It is chelated by the carboxylate group and exists in an octahedral geometry, with the Cl atoms cis to each other. The dication also lies on a twofold rotation axis. The cation and anion interact through one of the uncoordinated water molecules, forming a hydrogen-bonded chain structure that runs along the a axis.


2016 ◽  
Vol 72 (10) ◽  
pp. 1412-1416
Author(s):  
Monserrat Alfonso ◽  
Helen Stoeckli-Evans

The title isotypic complexes, bis[μ-5,6-bis(pyridin-2-yl)pyrazine-2,3-dicarboxylato]-κ4N1,O2,N6:O3;κ4O3:N1,O2,N6-bis[diaquamanganese(II)] tetrahydrate, [Mn2(C16H8N4O4)2(H2O)4]·4H2O, (I), and bis[μ-5,6-bis(pyridin-2-yl)pyrazine-2,3-dicarboxylato]-κ4N1,O2,N6:O3;κ4O3:N1,O2,N6-bis[diaquairon(II)] tetrahydrate, [Fe2(C16H8N4O4)2(H2O)4]·4H2O, (II), are, respectively, the manganese(II) and iron(II) complexes of the ligand 5,6-bis(pyridin-2-yl)-pyrazine-2,3-dicarboxylic acid. The complete molecule of each complex is generated by inversion symmetry. Each metal ion is coordinated by a pyrazine N atom, a pyridine N atom, two carboxylate O atoms, one of which is bridging, and two water O atoms. The metal atoms haveMN2O4coordination geometries and the complexes have a cage-like structure. In the crystals of both compounds, the complexes are linked by O—H...O and O—H...N hydrogen bonds involving the coordinating water molecules, forming chains along [100]. These chains are linked by O—H...O hydrogen bonds involving the non-coordinating water molecules, forming layers parallel to (011). The layers are linked by pairs of C—H...O hydrogen bonds and offset π–π interactions, so forming a hydrogen-bonded three-dimensional framework.


Sign in / Sign up

Export Citation Format

Share Document