The effect of vertical measurement resolution on the correlation structure of a ground penetrating radar reflection image

2004 ◽  
Vol 31 (21) ◽  
pp. n/a-n/a ◽  
Author(s):  
Rosemary Knight ◽  
Paulette Tercier ◽  
James Irving
Geophysics ◽  
1998 ◽  
Vol 63 (5) ◽  
pp. 1573-1584 ◽  
Author(s):  
Steven A. Arcone ◽  
Daniel E. Lawson ◽  
Allan J. Delaney ◽  
Jeffrey C. Strasser ◽  
Jodie D. Strasser

We have used ground‐penetrating radar to profile the depth of permafrost, to groundwater beneath permafrost, and to bedrock within permafrost in alluvial sediments of interior Alaska. We used well log data to aid the interpretations and to calculate dielectric permittivities for frozen and unfrozen materials. Interfaces between unfrozen and frozen sediments above permafrost were best resolved with wavelet bandwidths centered at and above 100 MHz. The resolution also required consideration of antenna configuration, season, and surface conditions. Depths to subpermafrost groundwater were profiled where it was in continuous contact with the bottom of the permafrost, except near transitions to unfrozen zones, where the contact appeared to dip steeply. The complexity of the responses to intrapermafrost bedrock, detected at a maximum depth of 47 m, appears to distinguish these events from those of subpermafrost saturated sediments. The relative dielectric permittivity ranged between 4.4 and 8.3 for the permafrost, and between 12 and 45 for partially to fully saturated, unfrozen silts and sands. Scattering losses are evident from intrapermafrost diffractions and from the improved penetration achieved by lowering the midband radar frequency from 100 to 50 MHz.


Geophysics ◽  
2020 ◽  
Vol 85 (4) ◽  
pp. H61-H69
Author(s):  
Niklas Allroggen ◽  
Stéphane Garambois ◽  
Guy Sénéchal ◽  
Dominique Rousset ◽  
Jens Tronicke

Crosshole ground-penetrating radar (GPR) is applied in areas that require a very detailed subsurface characterization. Analysis of such data typically relies on tomographic inversion approaches providing an image of subsurface parameters. We have developed an approach for processing the reflected energy in crosshole GPR data and applied it on GPR data acquired in different sedimentary settings. Our approach includes muting of the first arrivals, separating the up- and the downgoing wavefield components, and backpropagating the reflected energy by a generalized Kirchhoff migration scheme. We obtain a reflection image that contains information on the location of electromagnetic property contrasts, thus outlining subsurface architecture in the interborehole plane. In combination with velocity models derived from different tomographic approaches, these images allow for a more detailed interpretation of subsurface structures without the need to acquire additional field data. In particular, a combined interpretation of the reflection image and the tomographic velocity model improves the ability to locate layer boundaries and to distinguish different subsurface units. To support our interpretations of our field data examples, we compare our crosshole reflection results with independent information, including borehole logs and surface GPR data.


2021 ◽  
Vol 5 (4) ◽  
pp. 1-20
Author(s):  
D.Michelle Naomie Mavoungou ◽  
Pingsong Zhang ◽  
Siwei Zhang ◽  
Qiong Wang

The effect of grouting behind tunnel wall directly affects the surrounding ground settlement and the stability of tunnel structure, so the grouting quality detection is very necessary. As an efficient and convenient shallow geophysical exploration method, ground-penetrating radar can meet the high-resolution and non-destructive requirements of grouting quality detection behind the tunnel wall, so it is widely used in engineering in recent years. Most of the existing studies have obvious regional pertinence and special geological conditions, and there are few universal studies on the characteristics of the ground penetrating radar reflection image of the grouting defect behind the tunnel wall. In view of this, this paper uses the finite difference time domain method to simulate several grouting defects behind the wall, such as voids, water-bearing anomaly, cracks, and other grouting defects. The simulation results show that the reflection image of the direct wave is characterized by a white band with strong amplitude; the interface between primary support and second lining, primary support, and surrounding rock is also banded; the circular cavity and water anomaly characteristics are all hyperbolic, the difference is that the phase of the lower part of the radar image of the cavity anomaly is 0, and there are only hyperbolic tails on both sides, and the water-bearing anomaly also has obvious hyperbolic characteristics at each interface; the reflected wave characteristics of the rectangular crack are striped and watery and the reflected wave characteristic of rectangular cracks is striped, and the abnormal range of water-bearing cracks on the radar image is larger than that of air. The research results can provide an effective theoretical reference for the engineering application of ground penetrating radar detection of grouting defects behind the tunnel wall.


Sign in / Sign up

Export Citation Format

Share Document