scholarly journals A global perspective on Langmuir turbulence in the ocean surface boundary layer

2012 ◽  
Vol 39 (18) ◽  
Author(s):  
Stephen E. Belcher ◽  
Alan L. M. Grant ◽  
Kirsty E. Hanley ◽  
Baylor Fox-Kemper ◽  
Luke Van Roekel ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Ocean Surface ◽  
Global Perspective ◽  
Surface Boundary ◽  
Langmuir Turbulence ◽  
Surface Boundary Layer

scholarly journals Assessing the Effects of Langmuir Turbulence on the Entrainment Buoyancy Flux in the Ocean Surface Boundary Layer

2017 ◽  
Vol 47 (12) ◽  
pp. 2863-2886 ◽  
Author(s):  
Qing Li ◽  
Baylor Fox-Kemper
Keyword(s):  
Boundary Layer ◽  
Climate Model ◽  
Ocean Surface ◽  
Buoyancy Flux ◽  
Entrainment Rate ◽  
Surface Boundary ◽  
Langmuir Turbulence ◽  
Convective Turbulence ◽  
Surface Boundary Layer ◽  
The Impact

AbstractLarge-eddy simulations (LESs) with various constant wind, wave, and surface destabilizing surface buoyancy flux forcing are conducted, with a focus on assessing the impact of Langmuir turbulence on the entrainment buoyancy flux at the base of the ocean surface boundary layer. An estimate of the entrainment buoyancy flux scaling is made to best fit the LES results. The presence of Stokes drift forcing and the resulting Langmuir turbulence enhances the entrainment rate significantly under weak surface destabilizing buoyancy flux conditions, that is, weakly convective turbulence. In contrast, Langmuir turbulence effects are moderate when convective turbulence is dominant and appear to be additive rather than multiplicative to the convection-induced mixing. The parameterized unresolved velocity scale in the K-profile parameterization (KPP) is modified to adhere to the new scaling law of the entrainment buoyancy flux and account for the effects of Langmuir turbulence. This modification is targeted on common situations in a climate model where either Langmuir turbulence or convection is important and may overestimate the entrainment when both are weak. Nevertheless, the modified KPP is tested in a global climate model and generally outperforms those tested in previous studies. Improvements in the simulated mixed layer depth are found, especially in the Southern Ocean in austral summer.

scholarly journals Evaluating Langmuir turbulence parameterizations in the ocean surface boundary layer

2014 ◽  
Vol 119 (3) ◽  
pp. 1899-1910 ◽  
Author(s):  
G. Sutherland ◽  
K. H. Christensen ◽  
B. Ward
Keyword(s):  
Boundary Layer ◽  
Ocean Surface ◽  
Surface Boundary ◽  
Langmuir Turbulence ◽  
Surface Boundary Layer

scholarly journals Observations of Turbulence in the Ocean Surface Boundary Layer: Energetics and Transport

2009 ◽  
Vol 39 (5) ◽  
pp. 1077-1096 ◽  
Author(s):  
Gregory P. Gerbi ◽  
John H. Trowbridge ◽  
Eugene A. Terray ◽  
Albert J. Plueddemann ◽  
Tobias Kukulka
Keyword(s):  
Boundary Layer ◽  
Diffusion Coefficient ◽  
Kinetic Energy ◽  
Wave Breaking ◽  
Ocean Surface ◽  
Surface Boundary ◽  
Langmuir Turbulence ◽  
Rigid Boundary ◽  
Surface Boundary Layer ◽  
Buoyancy Forcing

Abstract Observations of turbulent kinetic energy (TKE) dynamics in the ocean surface boundary layer are presented here and compared with results from previous observational, numerical, and analytic studies. As in previous studies, the dissipation rate of TKE is found to be higher in the wavy ocean surface boundary layer than it would be in a flow past a rigid boundary with similar stress and buoyancy forcing. Estimates of the terms in the turbulent kinetic energy equation indicate that, unlike in a flow past a rigid boundary, the dissipation rates cannot be balanced by local production terms, suggesting that the transport of TKE is important in the ocean surface boundary layer. A simple analytic model containing parameterizations of production, dissipation, and transport reproduces key features of the vertical profile of TKE, including enhancement near the surface. The effective turbulent diffusion coefficient for heat is larger than would be expected in a rigid-boundary boundary layer. This diffusion coefficient is predicted reasonably well by a model that contains the effects of shear production, buoyancy forcing, and transport of TKE (thought to be related to wave breaking). Neglect of buoyancy forcing or wave breaking in the parameterization results in poor predictions of turbulent diffusivity. Langmuir turbulence was detected concurrently with a fraction of the turbulence quantities reported here, but these times did not stand out as having significant differences from observations when Langmuir turbulence was not detected.

scholarly journals Comments on “Langmuir Turbulence and Surface Heating in the Ocean Surface Boundary Layer”

2018 ◽  
Vol 48 (2) ◽  
pp. 455-458 ◽  
Author(s):  
Yign Noh ◽  
Yeonju Choi
Keyword(s):  
Boundary Layer ◽  
Ocean Surface ◽  
Large Eddy Simulations ◽  
Surface Heating ◽  
Length Scale ◽  
Surface Boundary ◽  
Langmuir Turbulence ◽  
Surface Boundary Layer ◽  
Obukhov Length ◽  
Large Eddy

AbstractUsing large-eddy simulations (LES) it is shown that the depth of a diurnal thermocline h should be scaled by the Zilitinkevich scale LZ, not by the Monin–Obukhov length scale LMO, contrary to the proposition by Pearson et al. Their argument to explain the slower increase of h than LMO using the effect of the preexisting thermocline is also invalid.

Interaction of Langmuir Turbulence and Inertial Currents in the Ocean Surface Boundary Layer under Tropical Cyclones

2018 ◽  
Vol 48 (9) ◽  
pp. 1921-1940 ◽  
Author(s):  
Dong Wang ◽  
Tobias Kukulka ◽  
Brandon G. Reichl ◽  
Tetsu Hara ◽  
Isaac Ginis ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Surface Layer ◽  
Tropical Cyclones ◽  
Ocean Surface ◽  
Stokes Drift ◽  
Surface Boundary ◽  
Langmuir Turbulence ◽  
Surface Boundary Layer ◽  
Wave Forcing ◽  
Inertial Currents

AbstractBased on a large-eddy simulation approach, this study investigates the response of the ocean surface boundary layer (OSBL) and Langmuir turbulence (LT) to extreme wind and complex wave forcing under tropical cyclones (TCs). The Stokes drift vector that drives LT is determined from spectral wave simulations. During maximum TC winds, LT substantially enhances the entrainment of cool water, causing rapid OSBL deepening. This coincides with relatively strong wave forcing, weak inertial currents, and shallow OSBL depth , measured by smaller ratios of , where denotes a Stokes drift decay length scale. LT directly affects a near-surface layer whose depth is estimated from enhanced anisotropy ratios of velocity variances. During rapid OSBL deepening, is proportional to , and LT efficiently transports momentum in coherent structures, locally enhancing shear instabilities in a deeper shear-driven layer, which is controlled by LT. After the TC passes, inertial currents are stronger and is greater while is shallower and proportional to . During this time, the LT-affected surface layer is too shallow to directly influence the deeper shear-driven layer, so that both layers are weakly coupled. At the same time, LT reduces surface currents that play a key role in the surface energy input at a later stage. These two factors contribute to relatively small TKE levels and entrainment rates after TC passage. Therefore, our study illustrates that inertial currents need to be taken into account for a complete understanding of LT and its effects on OSBL dynamics in TC conditions.

scholarly journals Reply to “Comments on ‘Langmuir Turbulence and Surface Heating in the Ocean Surface Boundary Layer’”

2018 ◽  
Vol 48 (2) ◽  
pp. 459-462
Author(s):  
Brodie C. Pearson ◽  
Alan L. M. Grant ◽  
Jeff A. Polton ◽  
Stephen E. Belcher
Keyword(s):  
Boundary Layer ◽  
Ocean Surface ◽  
Nocturnal Boundary Layer ◽  
Surface Heating ◽  
Surface Boundary ◽  
Langmuir Turbulence ◽  
Layer Depth ◽  
Surface Boundary Layer ◽  
Surface Buoyancy ◽  
Surface Buoyancy Flux

AbstractThe differences between the conclusions of Noh and Choi and of Pearson et al., which are largely a result of defining different length scales based on different quantities, are discussed. This study shows that the layer over which Langmuir turbulence mixes (nominally hTKE) under a stabilizing surface buoyancy flux should be scaled by a combination of the Langmuir stability length LL and initial/nocturnal boundary layer depth h0 rather than by the Zilitinkevich length.

LESbrary: A library of large eddy simulation data for the calibration and uncertainty quantification of ocean surface boundary layer turbulence parameterizations

2021 ◽  
Author(s):  
Gregory Wagner ◽  
Andre Souza ◽  
Adeline Hillier ◽  
Ali Ramadhan ◽  
Raffaele Ferrari
Keyword(s):  
Boundary Layer ◽  
Turbulent Mixing ◽  
Large Scale ◽  
Ocean Surface ◽  
Limited Area ◽  
Surface Boundary ◽  
Model Errors ◽  
Surface Boundary Layer ◽  
Large Eddy ◽  
Free Parameters

<p>Parameterizations of turbulent mixing in the ocean surface boundary layer (OSBL) are key Earth System Model (ESM) components that modulate the communication of heat and carbon between the atmosphere and ocean interior. OSBL turbulence parameterizations are formulated in terms of unknown free parameters estimated from observational or synthetic data. In this work we describe the development and use of a synthetic dataset called the “LESbrary” generated by a large number of idealized, high-fidelity, limited-area large eddy simulations (LES) of OSBL turbulent mixing. We describe how the LESbrary design leverages a detailed understanding of OSBL conditions derived from observations and large scale models to span the range of realistically diverse physical scenarios. The result is a diverse library of well-characterized “synthetic observations” that can be readily assimilated for the calibration of realistic OSBL parameterizations in isolation from other ESM model components. We apply LESbrary data to calibrate free parameters, develop prior estimates of parameter uncertainty, and evaluate model errors in two OSBL parameterizations for use in predictive ESMs.</p>

scholarly journals A review of studies on turbulent mixing in ocean surface boundary layer

2017 ◽  
Vol 26 (5) ◽  
pp. 239-250 ◽  
Author(s):  
Yutaka Yoshikawa ◽  
Takahiro Endoh
Keyword(s):  
Boundary Layer ◽  
Turbulent Mixing ◽  
Ocean Surface ◽  
Surface Boundary ◽  
Surface Boundary Layer

scholarly journals Horizontal Dispersion of Buoyant Materials in the Ocean Surface Boundary Layer

2018 ◽  
Vol 48 (9) ◽  
pp. 2103-2125 ◽  
Author(s):  
Jun-Hong Liang ◽  
Xiaoliang Wan ◽  
Kenneth A. Rose ◽  
Peter P. Sullivan ◽  
James C. McWilliams
Keyword(s):  
Boundary Layer ◽  
Three Dimensional ◽  
Ocean Surface ◽  
Turbulent Dispersion ◽  
Surface Boundary ◽  
Particle Trajectories ◽  
Stokes Flows ◽  
Surface Boundary Layer ◽  
Horizontal Dispersion ◽  
Shear Dispersion

ABSTRACTThe horizontal dispersion of materials with a constant rising speed under the exclusive influence of ocean surface boundary layer (OSBL) flows is investigated using both three-dimensional turbulence-resolving Lagrangian particle trajectories and the classical theory of dispersion in bounded shear currents generalized for buoyant materials. Dispersion in the OSBL is caused by the vertical shear of mean horizontal currents and by the turbulent velocity fluctuations. It reaches a diffusive regime when the equilibrium vertical material distribution is established. Diffusivity from the classical shear dispersion theory agrees reasonably well with that diagnosed using three-dimensional particle trajectories. For weakly buoyant materials that can be mixed into the boundary layer, shear dispersion dominates turbulent dispersion. For strongly buoyant materials that stay at the ocean surface, shear dispersion is negligible compared to turbulent dispersion. The effective horizontal diffusivity due to shear dispersion is controlled by multiple factors, including wind speed, wave conditions, vertical diffusivity, mixed layer depth, latitude, and buoyant rising speed. With all other meteorological and hydrographic conditions being equal, the effective horizontal diffusivity is larger in wind-driven Ekman flows than in wave-driven Ekman–Stokes flows for weakly buoyant materials and is smaller in Ekman flows than in Ekman–Stokes flows for strongly buoyant materials. The effective horizontal diffusivity is further reduced when enhanced mixing by breaking waves is included. Dispersion by OSBL flows is weaker than that by submesoscale currents at a scale larger than 100 m. The analytic framework will improve subgrid-scale modeling in realistic particle trajectory models using currents from operational ocean models.

Wind- and Wave-driven Ocean Surface Boundary Layer in a Frontal Zone: Roles of Submesoscale Eddies and Ekman-Stokes Transport

2021 ◽  
Author(s):  
Jianguo Yuan ◽  
Jun-Hong Liang
Keyword(s):  
Boundary Layer ◽  
Frontal Zone ◽  
Surface Current ◽  
Ocean Surface ◽  
Buoyancy Flux ◽  
Temperature Structure ◽  
Surface Boundary ◽  
Surface Boundary Layer ◽  
Horizontal Mixing ◽  
The Right

AbstractLarge-eddy simulations are used to investigate the influence of a horizontal frontal zone, represented by a stationary uniform background horizontal temperature gradient, on the wind- and wave-driven ocean surface boundary layers. In a frontal zone, the temperature structure, the ageostrophic mean horizontal current, and the turbulence in the ocean surface boundary layer all change with the relative angle among the wind and the front. The net heating and cooling of the boundary layer could be explained by the depth-integrated horizontal advective buoyancy flux, called the Ekman Buoyancy Flux (or the Ekman-Stokes Buoyancy Flux if wave effects are included). However, the detailed temperature profiles are also modulated by the depth-dependent advective buoyancy flux and submesoscale eddies. The surface current is deflected less (more) to the right of the wind and wave when the depth-integrated advective buoyancy flux cools (warms) the ocean surface boundary layer. Horizontal mixing is greatly enhanced by submesoscale eddies. The eddy-induced horizontal mixing is anisotropic and is stronger to the right of the wind direction. Vertical turbulent mixing depends on the superposition of the geostrophic and ageostrophic current, the depth-dependent advective buoyancy flux, and submesoscale eddies.

Sign in / Sign up

Export Citation Format

Share Document