Theoretical strength and rubber-like behaviour in micro-sized pyrolytic carbon

The shape of the emitter is of cardinal importance to field-ion microscopy. First, the field evaporation process itself is closely related to the initial tip shape. Secondly, the imaging stress, which is near the theoretical strength of the material and intrinsic to the imaging process, cannot be characterized without knowledge of the emitter shape. Finally, the problem of obtaining quantitative geometric information from the micrograph cannot be solved without knowing the shape. Previously published grain-boundary topographies were obtained employing an assumption of a spherical shape (1). The present investigation shows that the true shape deviates as much as 100 Å from sphericity and boundary reconstructions contain considerable error as a result.Our present procedures for obtaining tip shape may be summarized as follows. An empirical projection, D=f(θ), is obtained by digitizing the positions of poles on a field-ion micrograph.

Download Full-text

Pyrolytic carbon filaments and associated catalytic particles formed in steel tubes

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100113196 ◽

1984 ◽

Vol 42 ◽

pp. 662-663

Author(s):

Y. L. Chen ◽

J. R. Bradley

Keyword(s):

Stainless Steel ◽

Carbon Steel ◽

Catalyst Particle ◽

Pyrolytic Carbon ◽

Plain Carbon Steel ◽

304 Stainless Steel ◽

Hydrocarbon Gases ◽

Steel Tubes ◽

Filamentous Carbon ◽

Carbon Filaments

Considerable effort has been directed toward an improved understanding of the production of the strong and stiff ∼ 1-20 μm diameter pyrolytic carbon fibers of the type reported by Koyama and, more recently, by Tibbetts. These macroscopic fibers are produced when pyrolytic carbon filaments (∼ 0.1 μm or less in diameter) are thickened by deposition of carbon during thermal decomposition of hydrocarbon gases. Each such precursor filament normally lengthens in association with an attached catalyst particle. The subject of filamentous carbon formation and much of the work on characterization of the catalyst particles have been reviewed thoroughly by Baker and Harris. However, identification of the catalyst particles remains a problem of continuing interest. The purpose of this work was to characterize the microstructure of the pyrolytic carbon filaments and the catalyst particles formed inside stainless steel and plain carbon steel tubes. For the present study, natural gas (∼; 97 % methane) was passed through type 304 stainless steel and SAE 1020 plain carbon steel tubes at 1240°K.

Download Full-text

Alterations of ultrastructure and elemental composition in cultured human epidermal keratinocytes after treatment with nitrofurazone and silver sulfadiazine

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100127803 ◽

1987 ◽

Vol 45 ◽

pp. 676-677

Author(s):

A. R. Crooker ◽

M. C. Myers ◽

T. L. Beard ◽

E. S. Graham

Keyword(s):

Electron Microscopy ◽

Elemental Composition ◽

Pyrolytic Carbon ◽

Human Keratinocytes ◽

Silver Sulfadiazine ◽

Epidermal Keratinocytes ◽

Human Epidermal Keratinocytes ◽

Culture Systems ◽

Cytotoxicity Endpoints

Cell culture systems have become increasingly popular as a means of screening toxic agents and studying toxic mechanisms of drugs and other chemicals at the cellular and subcellular levels. These in vitro tests can be conducted rapidly in a broad range of relevant mammalian culture systems; a variety of biological and biochemical cytotoxicity endpoints can be examined. The following study utilized human keratinocytes to evaluate the relative cytotoxicities of nitrofurazone (NF) and silver sulfadiazine (SS), the active ingredients of FURACIN(R) Topical Cream and SILVADENE(R) Cream, respectively. These compounds are anti-infectives used in the treatment of burn patients. Cell ultrastructure and elemental composition were utilized as cytotoxicity endpoints.Normal Human Epidermal Keratinocytes (HK) were prepared from the EpiPackTM culture system (Clonetics Corporation, Boulder, CO). For scanning electron microscopy (SEM) and transmission electron microscopy (TEM), cells were seeded on sterile 35 mm Falcon plastic dishes; for elemental microanalysis, cells were plated on polished pyrolytic carbon discs (E. Fullam, Latham, NY) placed in the culture dishes.

Download Full-text