Unlike regular pigments based on selective light absorption, the so-called “effect pigments″ are based on the phenomena of structural color, or selective reflectance. Structural color has appealing aesthetic qualities, such as angle-dependent hue, and is able to produce lightfast colors. When used as a pigment, however, the gamut of the print is more limited, the color is difficult to measure, and therefore color management and preprint process become challenging. The aim of this paper is to compare the behavior of effect pigments in the processes of lithographic and screen printing with standard pigments used in so-called process inks, and to analyze their optical properties when used on their own or in combination with absorption pigments. An image of amber beads was printed as screen prints and lithographs. Three sets of inks were used: Set one: Standard process inks in the colors cyan, magenta, yellow and black (CMYK); set two: RGB inks formulated with Merck Spectraval™ pearlescent pigments which allow additive red, green, blue printing on a black substrate; and set three: golden inks formulated with pigments from the Merck Iriodin™ and Pyrisma™ effect pigment range. The image was printed on white and black paper. The optical appearance was assessed visually, and spectra and color coordinates were measured.
Structural color printing based on plasmonic metasurfaces of perfect light absorption
