Solid oxide electrolysis: Concluding remarks

2015 ◽  
Vol 182 ◽  
pp. 519-528 ◽  
Author(s):  
Areum Jun ◽  
Young-Wan Ju ◽  
Guntae Kim
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Storage Capacity ◽  
Renewable Energy Sources ◽  
Solid Oxide ◽  
Energy Resources ◽  
Renewable Energy Resources ◽  
Energy Storage Devices ◽  
Energy Storage Capacity ◽  
Solid Oxide Electrolysis

Renewable energy resources such as solar energy, wind energy, hydropower or geothermal energy have attracted significant attention in recent years. Renewable energy sources have to match supply with demand, therefore it is essential that energy storage devices (e.g., secondary batteries) are developed. However, secondary batteries are accompanied with critical problems such as high cost for the limited energy storage capacity and loss of charge over time. Energy storage in the form of chemical species, such as H2 or CO2, have no constraints on energy storage capacity and will also be essential. When plentiful renewable energy exists, for example, it could be used to convert H2O into hydrogen via water electrolysis. Also, renewable energy resources could be used to reduce CO2 into CO and recycle CO2 and H2O into sustainable hydrocarbon fuels in solid oxide electrolysis (SOE).

scholarly journals Scalable Multiport Converter Structure for Easy Grid Integration of Alternate Energy Sources for Generation of Isolated Voltage Sources for MMC

Electronics ◽  
2021 ◽  
Vol 10 (15) ◽  
pp. 1779
Author(s):  
Syed Rahman ◽  
Irfan Khan ◽  
Khaliqur Rahman ◽  
Sattam Al Otaibi ◽  
Hend I. Alkhammash ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Renewable Energy Sources ◽  
Energy Resources ◽  
Energy Sources ◽  
Renewable Energy Resources ◽  
Component Level ◽  
Storage Devices ◽  
Multiport Converter ◽  
Detailed Simulation ◽  
The Individual

This paper presents a novel, scalable, and modular multiport power electronic topology for the integration of multiple resources. This converter is not only scalable in terms of the integration of multiple renewable energy resources (RES) and storage devices (SDs) but is also scalable in terms of output ports. Multiple dc outputs of a converter are designed to serve as input to the stacking modules (SMs) of the modular multilevel converter (MMC). The proposed multiport converter is bidirectional in nature and superior in terms of functionality in a way that a modular universal converter is responsible for the integration of multiple RES/SDs and regulates multiple dc output ports for SMs of MMC. All input ports can be easily integrated (and controlled), and output ports also can be controlled independently in response to any load variations. An isolated active half-bridge converter with multiple secondaries acts as a central hub for power processing with multiple renewable energy resources that are integrated at the primary side. To verify the proposed converter, a detailed design of the converter-based system is presented along with the proposed control algorithm for managing power on the individual component level. Additionally, different modes of power management (emulating the availability/variability of renewable energy sources (RES)) are exhibited and analyzed here. Finally, detailed simulation results are presented in detail for the validation of the proposed concepts and design process.

scholarly journals Sizing Hybrid Energy Storage Systems for Distributed Power Systems under Multi-Time Scales

2018 ◽  
Vol 8 (9) ◽  
pp. 1453 ◽  
Author(s):  
Huanan Liu ◽  
Dezhi Li ◽  
Yuting Liu ◽  
Mingyu Dong ◽  
Xiangnan Liu ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Power Systems ◽  
Power System ◽  
Time Scales ◽  
Carbon Emissions ◽  
Storage Capacity ◽  
Rapid Development ◽  
Super Capacitor ◽  
Energy Storage Capacity

With the rapid development of industry, more fossil energy is consumed to generate electricity, which increases carbon emissions and aggravates the burden of environmental protection. To reduce carbon emissions, traditional centralized power generation networks are transforming into distributed renewable generation systems. However, the deployment of distributed generation systems can affect power system economy and stability. In this paper, under different time scales, system economy, stability, carbon emissions, and renewable energy fluctuation are comprehensively considered to optimize battery and super-capacitor installation capacity for an off-grid power system. After that, based on the genetic algorithm, this paper shows the optimal system operation strategy under the condition of the theoretical best energy storage capacity. Finally, the theoretical best capacity is tested under different renewable energy volatility rates. The simulation results show that by properly sizing the storage system’s capacity, although the average daily costs of the system can increase by 10%, the system’s carbon emissions also reduce by 42%. Additionally, the system peak valley gap reduces by 23.3%, and the renewable energy output’s fluctuation range and system loss of load probability are successfully limited in an allowable range. Lastly, it has less influence on the theoretical best energy storage capacity if the renewable energy volatility rate can be limited to within 10%.

Calculation of Receipt of Renewable Energy Resources and Operation Modes of Power Plants

2021 ◽  
pp. 1777-1795
Author(s):  
Baba Dzhabrailovich Babaev ◽  
Vladimir Panchenko ◽  
Valeriy Vladimirovich Kharchenko
Keyword(s):  
Renewable Energy ◽  
Power Plants ◽  
Optimization Problem ◽  
Renewable Energy Sources ◽  
Operating Mode ◽  
Climatic Conditions ◽  
Energy Resources ◽  
Optimal Configuration ◽  
Renewable Energy Resources ◽  
Energy Complex

The main objective of the work is to develop principles for the formation of the optimal composition of the energy complex from all the given power plants based on renewable energy sources for an autonomous consumer, taking into account the variable energy loads of the consumer, changing climatic conditions and the possibility of using local fuel and energy resources. As a result of solving this optimization problem, in addition to the optimal configuration of the power complex, it is also necessary to solve the problem of optimizing the joint operation of different types of power plants from the selected optimal configuration, that is, it is necessary to determine the optimal modes of operation of power plants and the optimal share of their participation in providing consumers at every moment in time. A numerical method for analyzing and optimizing the parameters and operating mode of the energy complex with the most accurate consideration of the schedule of changes in consumer load and software that automates the solution of this optimization problem are also presented.

Modeling Renewable Energy Integration in the 2030 Portuguese Power System: The Role of Energy Storage

2019 ◽  
Vol 17 (1) ◽  
Author(s):  
Ricardo Ramos ◽  
Rui Castro
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Power System ◽  
Storage Capacity ◽  
Renewable Energy Sources ◽  
Energy Integration ◽  
Renewable Energy Integration ◽  
Installed Capacity ◽  
Expected Increase

Abstract The main goal of this work is to study the role of energy storage in the context of the Portuguese power system by the year 2030. Portugal is one of the countries in the world with more installed energy storage capacity, namely pumped hydro storage (PHS). The simulations are performed with energyplan tool and allow us to predict the energy mix in Portugal by the year 2030; to forecast the utilization of the storage capacity, namely projections for the energy produced by PHS; to estimate CO2 emissions and percentage of renewable energy sources (RES) utilization; to assess the necessary storage capacity to avoid renewable curtailment; and to evaluate the future needs of installing further storage capacity, either with more PHS capacity or with the introduction of batteries. PHS revealed that it is important to avoid the curtailment of renewable energy, especially in a scenario of higher RES shares. It is shown that the increase in RES contribution would decrease the overall costs of the system, leading to thinking that further efforts should be made to increase the RES installed capacity and go beyond the official RES predictions for 2030. It is also concluded that the predicted storage capacity for 2030 can accommodate the expected increase in variable renewable generation without any further need for investments in PHS or battery solutions.

Research on Application of Energy Storage Technology in Renewable Energy Source Generation

2014 ◽  
Vol 1070-1072 ◽  
pp. 418-421 ◽  
Author(s):  
Jun Chen ◽  
Chun Lin Guo
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Power System ◽  
Renewable Energy Sources ◽  
Energy Storage Devices ◽  
Super Capacitor ◽  
Storage Technology ◽  
Energy Storage Technology ◽  
Research On Application ◽  
Storage Technologies

With the reserves of coal and other fossil energy decreasing, renewable energy sources (RES) will become the main power source of future power system. In order to ensure stable supply of RES generation and to improve efficiency of system, energy storage technology will play a more and more important role in power system. In this paper, we discussed the importance and characteristics of various energy storage technologies with battery and super capacitor energy storage technology as examples. Then we elaborated the principles and important effects of energy storage technologies in RES generation. Finally, using PSCAD to build the simulation model of grid connected RES generation and storage technology to obtain the effect of energy storage technologies. Results show that the energy storage devices can effectively alleviate the fluctuation of RES.

Sign in / Sign up

Export Citation Format

Share Document