Preparation of a ROMP-type imidazolium-functionalized norbornene ionic liquid block copolymer and the electrochemical property for lithium-ion batteries polyelectrolyte membranes

RSC Advances ◽  
2015 ◽  
Vol 5 (54) ◽  
pp. 43581-43588 ◽  
Author(s):  
Juan Wang ◽  
Xiaohui He ◽  
Hongyu Zhu ◽  
Defu Chen
Keyword(s):  
Ionic Liquid ◽  
Block Copolymer ◽  
Ionic Conductivity ◽  
Lithium Ion Batteries ◽  
Electrochemical Property ◽  
Polymer Electrolytes ◽  
Lithium Ion ◽  
Solid Polymer Electrolytes ◽  
Solid Polymer ◽  
Polyelectrolyte Membranes

Solid polymer electrolytes with high ionic conductivity have been prepared based on an imidazolium-functionalized norbornene ionic liquid block copolymer.

scholarly journals Tailored Solid Polymer Electrolytes by Montmorillonite with High Ionic Conductivity for Lithium-Ion Batteries

2019 ◽  
Vol 14 (1) ◽  
Author(s):  
Yingjian Zhao ◽  
Yong Wang
Keyword(s):  
Ionic Conductivity ◽  
Lithium Ion Batteries ◽  
Polymer Electrolytes ◽  
High Performance ◽  
Lithium Ion ◽  
Lewis Base ◽  
Solid Polymer Electrolytes ◽  
Solid Polymer ◽  
Lithium Ions ◽  
High Discharge Capacity

AbstractPolyethylene oxide (PEO)-based solid polymer electrolytes (SPEs) have important significance for the development of next-generation rechargeable lithium-ion batteries. However, strong coordination between lithium ions and PEO chains results the ion conductivity usually lower than the expectation. In this study, sub-micron montmorillonite is incorporated into the PEO frames as Lewis base center which enables the lithium ions to escape the restraint of PEO chains. After involving montmorillonite (MMT) into the SPEs, the ionic conductivity of SPEs is 4.7 mS cm− 1 at 70 °C which shows a comparable value with that of liquid electrolyte. As coupling with LiFePO4 material, the battery delivers a high discharge capacity of 150.3 mAh g− 1 and an excellent rate performance with a capacity of 111.8 mAh g− 1 at 0.16 C and maintains 58.2 mAh g− 1 at 0.8 C. This study suggests that the customized incorporation of Lewis base materials could offer a promising solution for achieving high-performance PEO-based solid-state electrolyte.

scholarly journals In Situ Preparation of Crosslinked Polymer Electrolytes for Lithium Ion Batteries: A Comparison of Monomer Systems

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1707
Author(s):  
Eike T. Röchow ◽  
Matthias Coeler ◽  
Doris Pospiech ◽  
Oliver Kobsch ◽  
Elizaveta Mechtaeva ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Solid State ◽  
Ionic Conductivity ◽  
Lithium Ion Batteries ◽  
Polymer Electrolytes ◽  
Polymer Networks ◽  
Lithium Ion ◽  
Solid Polymer Electrolytes ◽  
Free Standing

Solid polymer electrolytes for bipolar lithium ion batteries requiring electrochemical stability of 4.5 V vs. Li/Li+ are presented. Thus, imidazolium-containing poly(ionic liquid) (PIL) networks were prepared by crosslinking UV-photopolymerization in an in situ approach (i.e., to allow preparation directly on the electrodes used). The crosslinks in the network improve the mechanical stability of the samples, as indicated by the free-standing nature of the materials and temperature-dependent rheology measurements. The averaged mesh size calculated from rheologoical measurements varied between 1.66 nm with 10 mol% crosslinker and 4.35 nm without crosslinker. The chemical structure of the ionic liquid (IL) monomers in the network was varied to achieve the highest possible ionic conductivity. The systematic variation in three series with a number of new IL monomers offers a direct comparison of samples obtained under comparable conditions. The ionic conductivity of generation II and III PIL networks was improved by three orders of magnitude, to the range of 7.1 × 10−6 S·cm−1 at 20 °C and 2.3 × 10−4 S·cm−1 at 80 °C, compared to known poly(vinylimidazolium·TFSI) materials (generation I). The transition from linear homopolymers to networks reduces the ionic conductivity by about one order of magnitude, but allows free-standing films instead of sticky materials. The PIL networks have a much higher voltage stability than PEO with the same amount and type of conducting salt, lithium bis(trifluoromethane sulfonyl)imide (LiTFSI). GII-PIL networks are electrochemically stable up to a potential of 4.7 V vs. Li/Li+, which is crucial for a potential application as a solid electrolyte. Cycling (cyclovoltammetry and lithium plating-stripping) experiments revealed that it is possible to conduct lithium ions through the GII-polymer networks at low currents. We concluded that the synthesized PIL networks represent suitable candidates for solid-state electrolytes in lithium ion batteries or solid-state batteries.

scholarly journals Development of the PEO Based Solid Polymer Electrolytes for All-Solid State Lithium Ion Batteries

Polymers ◽  
2018 ◽  
Vol 10 (11) ◽  
pp. 1237 ◽  
Author(s):  
Yu Jiang ◽  
Xuemin Yan ◽  
Zhaofei Ma ◽  
Ping Mei ◽  
Wei Xiao ◽  
...  
Keyword(s):  
Solid State ◽  
Lithium Ion Batteries ◽  
Polymer Electrolytes ◽  
High Performance ◽  
Lithium Salt ◽  
Rapid Development ◽  
Lithium Ion ◽  
Solid Polymer Electrolytes ◽  
Solid Polymer ◽  
Potential Candidate

Solid polymer electrolytes (SPEs) have attracted considerable attention due to the rapid development of the need for more safety and powerful lithium ion batteries. The prime requirements of solid polymer electrolytes are high ion conductivity, low glass transition temperature, excellent solubility to the conductive lithium salt, and good interface stability against Li anode, which makes PEO and its derivatives potential candidate polymer matrixes. This review mainly encompasses on the synthetic development of PEO-based SPEs (PSPEs), and the potential application of the resulting PSPEs for high performance, all-solid-state lithium ion batteries.

scholarly journals Contribution Succinonitrile additive for Performa LiTFSi Solid Polymer Electrolytes for Li-Ion Battery

2020 ◽  
Vol 20 (2) ◽  
Author(s):  
Qolby Sabrina ◽  
Titik Lestariningsih ◽  
Christin Rina Ratri ◽  
Achmad Subhan
Keyword(s):  
Ionic Conductivity ◽  
Polymer Electrolytes ◽  
Room Temperature ◽  
Lithium Salt ◽  
Ionic Conduction ◽  
Lithium Ion ◽  
Solid Polymer Electrolytes ◽  
Solid Polymer ◽  
Half Cell ◽  
Li Ion

Solid polymer electrolyte (SPE) appropriate to solve packaging leakage and expansion volume in lithium-ion battery systems. Evaluation of electrochemical performance of SPE consisted of mixture lithium salt, solid plasticizer, and polymer precursor with different ratio. Impedance spectroscopy was used to investigate ionic conduction and dielectric response lithium bis(trifluoromethane)sulfony imide (LiTFSI) salt, and additive succinonitrile (SCN) plasticizer. The result showing enhanced high ionic conductivity. In half-cell configurations, wide electrochemical stability window of the SPE has been tested. Have stability window at room temperature, indicating great potential of SPE for application in lithium ion batteries. Additive SCN contribute to forming pores that make it easier for the li ion to move from the anode to the cathode and vice versa for better perform SPE. Pore of SPE has been charaterization with FE-SEM. Additive 5% w.t SCN shows the best ionic conductivity with 4.2 volt wide stability window and pretty much invisible pores.

scholarly journals Salt Concentration Effect on Electrical and Dielectric Properties of Solid Polymer Electrolytes based Carboxymethyl Cellulose for Lithium-ion Batteries

2021 ◽  
Vol 12 (5) ◽  
pp. 6114-6123
Keyword(s):  
Dielectric Properties ◽  
Ionic Conductivity ◽  
Polymer Electrolytes ◽  
Carboxymethyl Cellulose ◽  
Electrochemical Impedance ◽  
Lithium Ion ◽  
Lithium Perchlorate ◽  
Linear Sweep Voltammetry ◽  
Solid Polymer Electrolytes ◽  
Solid Polymer

Solid polymer electrolytes (SPEs) based carboxymethyl cellulose (CMC) with lithium perchlorate (LiClO4) were prepared via solution drop-cast technique. The CMC host is complexed by different concentrations of LiClO4 salt. SPEs were characterized by Electrochemical Impedance Spectroscopy (EIS) and Linear Sweep Voltammetry (LSV) in coin cells with lithium metal electrodes. EIS performed unique results based on various ionic conductivity values and dielectric properties. The higher ionic conductivity (1.32 × 10-5 S/cm) was obtained by SPEs 2 following by short-range ionic transport results based on dielectric properties depending on frequency. SPEs with LiClO4 addition are electrochemically stable over 2 V in lithium battery coin cells from LSV results.

Polymer-in-salt solid electrolytes for lithium-ion batteries

2019 ◽  
Vol 12 (06) ◽  
pp. 1930006 ◽  
Author(s):  
Chengjun Yi ◽  
Wenyi Liu ◽  
Linpo Li ◽  
Haoyang Dong ◽  
Jinping Liu
Keyword(s):  
Ionic Conductivity ◽  
Lithium Ion Batteries ◽  
Smart Grids ◽  
Solid Electrolytes ◽  
Room Temperature ◽  
Lithium Salt ◽  
Lithium Ion ◽  
Solid Polymer Electrolytes ◽  
Solid Polymer ◽  
Polymer Lithium Ion Batteries

Solid-state polymer lithium-ion batteries with better safety and higher energy density are one of the most promising batteries, which are expected to power future electric vehicles and smart grids. However, the low ionic conductivity at room temperature of solid polymer electrolytes (SPEs) decelerates the entry of such batteries into the market. Creating polymer-in-salt solid electrolytes (PISSEs) where the lithium salt contents exceed 50[Formula: see text]wt.% is a viable technology to enhance ionic conductivity at room temperature of SPEs, which is also suitable for scalable production. In this review, we first clarify the structure and ionic conductivity mechanism of PISSEs by analyzing the interactions between lithium salt and polymer matrix. Then, the recent advances on polyacrylonitrile (PAN)-based PISSEs and polycarbonate derivative-based PISSEs will be reviewed. Finally, we propose possible directions and opportunities to accelerate the commercializing of PISSEs for solid polymer Li-ion batteries.

Solid Polymer Electrolytes Based on Functionalized Tannic Acids from Natural Resources for All-Solid-State Lithium-Ion Batteries

ChemSusChem ◽  
2015 ◽  
Vol 8 (24) ◽  
pp. 4133-4138 ◽  
Author(s):  
Jimin Shim ◽  
Ki Yoon Bae ◽  
Hee Joong Kim ◽  
Jin Hong Lee ◽  
Dong-Gyun Kim ◽  
...  
Keyword(s):  
Solid State ◽  
Natural Resources ◽  
Lithium Ion Batteries ◽  
Polymer Electrolytes ◽  
Lithium Ion ◽  
Solid Polymer Electrolytes ◽  
Solid Polymer
Sign in / Sign up

Export Citation Format

Share Document