The impact of the particle size of a metal–organic framework for sulfur storage in Li–S batteries

2015 ◽  
Vol 3 (16) ◽  
pp. 8272-8275 ◽  
Author(s):  
Junwen Zhou ◽  
Xiaosong Yu ◽  
Xinxin Fan ◽  
Xiaojuan Wang ◽  
Haiwei Li ◽  
...  
Keyword(s):  
Particle Size ◽  
Metal Organic Framework ◽  
Cycling Stability ◽  
Metal Organic ◽  
Sulfur Host ◽  
The Impact ◽  
First Time ◽  
Organic Framework

We report for the first time the influence of the particle size of a porous sulfur host on the sulfur utilization and cycling stability of Li–S batteries.

A new cathode material synthesized by a thiol-modified metal–organic framework (MOF) covalently connecting sulfur for superior long-cycling stability in lithium–sulfur batteries

2019 ◽  
Vol 7 (42) ◽  
pp. 24515-24523 ◽  
Author(s):  
Xu Liu ◽  
Shi Wang ◽  
Ailian Wang ◽  
Zhinan Wang ◽  
Jie Chen ◽  
...  
Keyword(s):  
Cathode Material ◽  
Metal Organic Framework ◽  
Cycling Stability ◽  
Sulfur Cathode ◽  
Lithium Sulfur Batteries ◽  
Metal Organic ◽  
First Time ◽  
Lithium Sulfur ◽  
Organic Framework

A stabilized sulfur cathode with CNT@MOF covalently connected with sulfur was fabricated for the first time.

Solvent-Free Powder Synthesis and MOF-CVD Thin Films of the Mesoporous Metal-Organic Framework MAF-6

2019 ◽  
Author(s):  
Timothée Stassin ◽  
Ivo Stassen ◽  
Joao Marreiros ◽  
Alexander John Cruz ◽  
Rhea Verbeke ◽  
...  
Keyword(s):  
Vapor Phase ◽  
Metal Organic Framework ◽  
Chemical Vapor ◽  
Uptake Capacity ◽  
Powder Synthesis ◽  
Crystalline Films ◽  
Metal Organic ◽  
Mesoporous Metal ◽  
First Time ◽  
Organic Framework

A simple solvent- and catalyst-free method is presented for the synthesis of the mesoporous metal-organic framework (MOF) MAF-6 (RHO-Zn(eIm)2) based on the reaction of ZnO with 2-ethylimidazole vapor at temperatures ≤ 100 °C. By translating this method to a chemical vapor deposition (CVD) protocol, mesoporous crystalline films could be deposited for the first time entirely from the vapor phase. A combination of PALS and Kr physisorption measurements confirmed the porosity of these MOF-CVD films and the size of the MAF-6 supercages (diam. ~2 nm), in close agreement with powder data and calculations. MAF-6 powders and films were further characterized by XRD, TGA, SEM, FTIR, PDF and EXAFS. The exceptional uptake capacity of the mesoporous MAF-6 in comparison to the microporous ZIF-8 is demonstrated by vapor-phase loading of a molecule larger than the ZIF-8 windows.

scholarly journals Particle size studies to reveal crystallization mechanisms of the metal organic framework HKUST-1 during sonochemical synthesis

2017 ◽  
Vol 34 ◽  
pp. 365-370 ◽  
Author(s):  
Mitchell R. Armstrong ◽  
Sethuraman Senthilnathan ◽  
Christopher J. Balzer ◽  
Bohan Shan ◽  
Liang Chen ◽  
...  
Keyword(s):  
Particle Size ◽  
Metal Organic Framework ◽  
Sonochemical Synthesis ◽  
Metal Organic ◽  
Organic Framework

scholarly journals Particle size effects in the kinetic trapping of a structurally-locked form of a flexible MOF

CrystEngComm ◽  
2016 ◽  
Vol 18 (22) ◽  
pp. 4172-4179 ◽  
Author(s):  
Oliver M. Linder-Patton ◽  
Witold M. Bloch ◽  
Campbell J. Coghlan ◽  
Kenji Sumida ◽  
Susumu Kitagawa ◽  
...  
Keyword(s):  
Particle Size ◽  
Size Effects ◽  
Metal Organic Framework ◽  
Particle Size Effects ◽  
Metal Organic ◽  
Flexible Metal ◽  
Kinetic Trapping ◽  
2D To 3D ◽  
Organic Framework

Controlling the particle size of a flexible metal–organic framework demonstrates that a 2D to 3D transformation gives a kinetically-trapped, structurally-locked form.

scholarly journals Polymer-Assisted Modification of Metal-Organic Framework MIL-96 (Al): Influence on Particle Size, Crystal Morphology and Perfluorooctanoic Acid (PFOA) Removal

2020 ◽  
Author(s):  
Luqman Hakim Mohd Azmi ◽  
Daryl R. Williams ◽  
Bradley P. Ladewig
Keyword(s):  
Particle Size ◽  
Crystal Morphology ◽  
Low Cost ◽  
Metal Organic Framework ◽  
Synthesis Method ◽  
Perfluorooctanoic Acid ◽  
Water Soluble ◽  
Water Soluble Polymer ◽  
Metal Organic ◽  
Organic Framework

<div><b>Abstract</b></div><div>A new synthesis method was developed to prepare an aluminum-based metal organic framework (MIL-96) with a larger particle size and different crystal habits. A low cost and water-soluble polymer, hydrolyzed polyacrylamide (HPAM), was added in varying quantities into the synthesis reaction to achieve >200% particle size enlargement with controlled crystal morphology. The modified adsorbent, MIL-96-RHPAM2, was systematically characterized by SEM, XRD, FTIR, BET and TGA-MS. Using activated carbon (AC) as a reference adsorbent, the effectiveness of MIL-96-RHPAM2 for perfluorooctanoic acid (PFOA) removal from water was examined. The study confirms stable morphology of hydrated MIL-96-RHPAM2 particles as well as a superior PFOA adsorption capacity (340 mg/g) despite its lower surface area, relative to standard MIL-96. MIL-96-RHPAM2 suffers from slow adsorption kinetics as the modification significantly blocks pore access. The strong adsorption of PFOA by MIL-96-RHPAM2 was associated with the formation of electrostatic bonds between the anionic carboxylate of PFOA and the amine functionality present in the HPAM backbone. Thus, the strongly held PFOA molecules in the pores of MIL-96-RHPAM2 were not easily desorbed even after eluted with a high ionic strength solvent (500 mM NaCl). Nevertheless, this simple HPAM addition strategy can still chart promising pathways to impart judicious control over adsorbent particle size and crystal shapes while the introduction of amine functionality onto the surface chemistry is simultaneously useful for enhanced PFOA removal from contaminated aqueous systems.<br></div>

scholarly journals Polymer-Assisted Modification of Metal-Organic Framework MIL-96 (Al): Influence on Particle Size, Crystal Morphology and Perfluorooctanoic Acid (PFOA) Removal

2020 ◽  
Author(s):  
Luqman Hakim Mohd Azmi ◽  
Daryl R. Williams ◽  
Bradley P. Ladewig
Keyword(s):  
Particle Size ◽  
Crystal Morphology ◽  
Low Cost ◽  
Metal Organic Framework ◽  
Synthesis Method ◽  
Perfluorooctanoic Acid ◽  
Water Soluble ◽  
Water Soluble Polymer ◽  
Metal Organic ◽  
Organic Framework

<div><b>Abstract</b></div><div>A new synthesis method was developed to prepare an aluminum-based metal organic framework (MIL-96) with a larger particle size and different crystal habits. A low cost and water-soluble polymer, hydrolyzed polyacrylamide (HPAM), was added in varying quantities into the synthesis reaction to achieve >200% particle size enlargement with controlled crystal morphology. The modified adsorbent, MIL-96-RHPAM2, was systematically characterized by SEM, XRD, FTIR, BET and TGA-MS. Using activated carbon (AC) as a reference adsorbent, the effectiveness of MIL-96-RHPAM2 for perfluorooctanoic acid (PFOA) removal from water was examined. The study confirms stable morphology of hydrated MIL-96-RHPAM2 particles as well as a superior PFOA adsorption capacity (340 mg/g) despite its lower surface area, relative to standard MIL-96. MIL-96-RHPAM2 suffers from slow adsorption kinetics as the modification significantly blocks pore access. The strong adsorption of PFOA by MIL-96-RHPAM2 was associated with the formation of electrostatic bonds between the anionic carboxylate of PFOA and the amine functionality present in the HPAM backbone. Thus, the strongly held PFOA molecules in the pores of MIL-96-RHPAM2 were not easily desorbed even after eluted with a high ionic strength solvent (500 mM NaCl). Nevertheless, this simple HPAM addition strategy can still chart promising pathways to impart judicious control over adsorbent particle size and crystal shapes while the introduction of amine functionality onto the surface chemistry is simultaneously useful for enhanced PFOA removal from contaminated aqueous systems.<br></div>

Metal–organic frameworks: a universal strategy towards super-elastic hydrogels

2019 ◽  
Vol 10 (18) ◽  
pp. 2263-2272 ◽  
Author(s):  
Huaizhi Liu ◽  
Hao Peng ◽  
Yumeng Xin ◽  
Jiuyang Zhang
Keyword(s):  
Drug Delivery ◽  
Mechanical Performance ◽  
Metal Organic Framework ◽  
Metal Organic Frameworks ◽  
High Loading ◽  
Loading Capacity ◽  
Metal Organic ◽  
First Time ◽  
Organic Framework

We reported for the first time using metal–organic framework (MOF) nanoparticles as effective nanofillers to significantly enhance the mechanical performance of hydrogels. The MOF hydrogels have been developed for drug delivery materials with high loading capacity and much extended drug releasing profiles.

Sign in / Sign up

Export Citation Format

Share Document