scholarly journals Effect of counter-ions on the properties and performance of non-conjugated polyelectrolyte interlayers in solar cell and transistor devices

RSC Advances ◽  
2019 ◽  
Vol 9 (36) ◽  
pp. 20670-20676 ◽  
Author(s):  
Ju Hwan Kang ◽  
Yu Jung Park ◽  
Myung Joo Cha ◽  
Yeonjin Yi ◽  
Aeran Song ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Device Performance ◽  
Conjugated Polyelectrolyte ◽  
Interfacial Layers ◽  
Counter Ions ◽  
And Performance

Non-conjugated polyelectrolytes are empolyed as interfacial layers at the electrodes of solar cells and transistor devices to improve the power conversion efficiency (PCE) and device performance.

scholarly journals Digital printing of a novel electrode for stable flexible organic solar cells with a power conversion efficiency of 8.5%

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
S. Wageh ◽  
Mahfoudh Raïssi ◽  
Thomas Berthelot ◽  
Matthieu Laurent ◽  
Didier Rousseau ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Organic Solar Cells ◽  
Power Conversion ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Solution Processed ◽  
Transparent Conducting

AbstractPoly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) mixed with single-wall nanotubes (SWNTs) (10:1) and doped with (0.1 M) perchloric acid (HClO4) in a solution-processed film, working as an excellent thin transparent conducting film (TCF) in organic solar cells, was investigated. This new electrode structure can be an outstanding substitute for conventional indium tin oxide (ITO) for applications in flexible solar cells due to the potential of attaining high transparency with enhanced conductivity, good flexibility, and good durability via a low-cost process over a large area. In addition, solution-processed vanadium oxide (VOx) doped with a small amount of PEDOT-PSS(PH1000) can be applied as a hole transport layer (HTL) for achieving high efficiency and stability. From these viewpoints, we investigate the benefit of using printed SWNTs-PEDOT-PSS doped with HClO4 as a transparent conducting electrode in a flexible organic solar cell. Additionally, we applied a VOx-PEDOT-PSS thin film as a hole transporting layer and a blend of PTB7 (polythieno[3,4-b] thiophene/benzodithiophene): PC71BM (phenyl-C71-butyric acid methyl ester) as an active layer in devices. Zinc oxide (ZnO) nanoparticles were applied as an electron transport layer and Ag was used as the top electrode. The proposed solar cell structure showed an enhancement in short-circuit current, power conversion efficiency, and stability relative to a conventional cell based on ITO. This result suggests a great carrier injection throughout the interfacial layer, high conductivity and transparency, as well as firm adherence for the new electrode.

Donor-π-acceptor, triazine-linked porphyrin dyads as sensitizers for dye-sensitized solar cells

2015 ◽  
Vol 19 (01-03) ◽  
pp. 175-191 ◽  
Author(s):  
Ganesh D. Sharma ◽  
Galateia E. Zervaki ◽  
Kalliopi Ladomenou ◽  
Emmanuel N. Koukaras ◽  
Panagiotis P. Angaridis ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Carboxylic Acid ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Dye Sensitized Solar Cells ◽  
Orbital Energy ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

Two porphyrin dyads with the donor-π-acceptor molecular architecture, namely ( ZnP )-[triazine-gly]-( H 2 PCOOH ) and ( ZnP )-[triazine-Npip]-( H 2 PCOOH ), which consist of a zinc-metalated porphyrin unit and a free-base porphyrin unit covalently linked at their peripheries to a central triazine group, substituted either by a glycine in the former or a N-piperidine group in the latter, have been synthesized via consecutive amination substitution reactions of cyanuric chloride. The UV-vis absorption spectra and cyclic-voltammetry measurements of the two dyads, as well as theoretical calculations based on Density Functional Theory, suggest that they have suitable frontier orbital energy levels for use as sensitizers in dye-sensitized solar cells. Dye-sensitized solar cells based on ( ZnP )-[triazine-gly]-( H 2 PCOOH ) and ( ZnP )-[triazine-Npip]-( H 2 PCOOH ) have been fabricated, and they were found to exhibit power conversion efficiency values of 5.44 and 4.15%, respectively. Photovoltaic measurements (J–V curves) and incident photon to current conversion efficiency spectra of the two solar cells suggest that the higher power conversion efficiency value of the former solar cell is a result of its enhanced short circuit current, open circuit voltage, and fill factor values, as well as higher dye loading. This is ascribed to the existence of two carboxylic acid anchoring groups in ( ZnP )-[triazine-gly]-( H 2 PCOOH ), compared to one carboxylic acid group in ( ZnP )-[triazine-Npip]-( H 2 PCOOH ), which leads to a more effective binding onto the TiO 2 photoanode. Electrochemical impedance spectra show evidence that the ( ZnP )-[triazine-gly]-( H 2 PCOOH ) based solar cell exhibits a longer electron lifetime and more effective suppression of charge recombination reactions between the injected electrons and electrolyte.

Slow surface passivation and crystal relaxation with additives to improve device performance and durability for tin-based perovskite solar cells

2018 ◽  
Vol 11 (9) ◽  
pp. 2353-2362 ◽  
Author(s):  
Efat Jokar ◽  
Cheng-Hsun Chien ◽  
Amir Fathi ◽  
Mohammad Rameez ◽  
Yu-Hao Chang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Surface Passivation ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Device Performance ◽  
Slow Surface ◽  
Effective Additive ◽  
Improve Device

Ethylenediammonium diiodide (EDAI2) served as an effective additive for tin-based perovskite solar cells to attain a power conversion efficiency approaching 9%.

A review on two-dimensional (2D) perovskite material-based solar cells to enhance the power conversion efficiency

2022 ◽  
Author(s):  
Ehsan Elahi ◽  
Ghulam Dastgeer ◽  
Abdul Subhan Siddiqui ◽  
Supriya A. Patil ◽  
Muhammad Waqas Iqbal ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Two Dimensional ◽  
Rapid Progress ◽  
Perovskite Materials ◽  
Perovskite Material

With perovskite materials, rapid progress in power conversion efficiency (PCE) to reach 25% has gained a significant amount of attention from the solar cell industry.

Polymer solar cells based on D–A low bandgap copolymers containing fluorinated side chains of thiadiazoloquinoxaline acceptor and benzodithiophene donor units

2018 ◽  
Vol 42 (3) ◽  
pp. 1626-1633 ◽  
Author(s):  
M. L. Keshtov ◽  
S. A. Kuklin ◽  
A. R. Khokhlov ◽  
I. O. Konstantinov ◽  
N. V. Nekrasova ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Polymer Solar Cell ◽  
Polymer Solar Cells ◽  
Power Conversion ◽  
Side Chains ◽  
Low Bandgap

The increase in the fluorine atoms in the copolymer improves the power conversion efficiency of the polymer solar cell.

A high efficiency solution processed polymer inverted triple-junction solar cell exhibiting a power conversion efficiency of 11.83%

2015 ◽  
Vol 8 (1) ◽  
pp. 303-316 ◽  
Author(s):  
Abd. Rashid bin Mohd Yusoff ◽  
Dongcheon Kim ◽  
Hyeong Pil Kim ◽  
Fabio Kurt Shneider ◽  
Wilson Jose da Silva ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Triple Junction ◽  
High Efficiency ◽  
Open Circuit Voltage ◽  
Power Conversion ◽  
Open Circuit ◽  
Tandem Solar Cells

We propose that 1 + 1 + 1 triple-junction solar cells can provide an increased efficiency, as well as a higher open circuit voltage, compared to tandem solar cells.

Illumination Time Dependent Degradation of C60 Solar Cell Efficiencies

2013 ◽  
Vol 378 ◽  
pp. 125-130
Author(s):  
Murtaza Imran
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Quantum Yield ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Organic Solar Cells ◽  
Fill Factor ◽  
Power Conversion ◽  
Internal Resistance ◽  
Illumination Time

In contrast to the solar cells based on inorganic semiconductors, organic solar cells degrade during illumination. Therefore, the influence of the illumination time on the efficiencies of an organic solar cell is investigated which reveals that under steady-state illumination at 1 sun (100 mW/cm2) the efficiency of the solar cell with the structure of ITO/CuPc/C60/BCP/Ag degrade significantly over few hours. There are three efficiencies that are of interest; Fill Factor (FF), Power Conversion Efficiency (PCE), and Quantum Yield (QY). Fill factor decreased less than power conversion efficiency and quantum yield, indicating that the degradation in those efficiencies is caused by photon-induced damage to the molecules that did not lead to an increase in internal resistance.

scholarly journals Design of Dopant and Lead-Free Novel Perovskite Solar Cell for 16.85% Efficiency

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2110
Author(s):  
Syed Abdul Moiz ◽  
Ahmed N. M. Alahmadi
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cell ◽  
Hole Transport ◽  
Transport Layer ◽  
Lead Free ◽  
Hole Transport Layer

Halide based perovskite offers numerous advantages such as high-efficiency, low-cost, and simple fabrication for flexible solar cells. However, long-term stability as well as environmentally green lead-free applications are the real challenges for their commercialization. Generally, the best reported perovskite solar cells are composed of toxic lead (Pb) and unstable polymer as the absorber and electron/hole-transport layer, respectively. Therefore, in this study, we proposed and simulated the photovoltaic responses of lead-free absorber such as cesium titanium (IV) bromide, Cs2TiBr6 with dopant free electron phenyl-C61-butyric acid methyl ester (PCBM), and dopant free hole transport layer N,N′-Di(1-naphthyl)-N,N′-diphenyl-(1,1′-biphenyl)-4,4′-diamine (NPB) for the Ag/BCP/PCBM/Cs2TiBr6/NPB/ITO based perovskite solar cell. After comprehensive optimization of each layer through vigorous simulations with the help of software SCAPS 1D, it is observed that the proposed solar cell can yield maximum power-conversion efficiency up to 16.85%. This efficiency is slightly better than the previously reported power-conversion efficiency of a similar type of perovskite solar cell. We believe that the outcome of this study will not only improve our knowledge, but also triggers further investigation for the dopant and lead-free perovskite solar cell.

scholarly journals Enhanced efficiency in hollow core electrospun nanofiber-based organic solar cells

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Mohammad Ali Haghighat Bayan ◽  
Faramarz Afshar Taromi ◽  
Massimiliano Lanzi ◽  
Filippo Pierini
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Buffer Layer ◽  
Conversion Efficiency ◽  
Organic Solar Cells ◽  
High Efficiency ◽  
Power Conversion ◽  
Hollow Core ◽  
Pani Nanofibers

AbstractOver the last decade, nanotechnology and nanomaterials have attracted enormous interest due to the rising number of their applications in solar cells. A fascinating strategy to increase the efficiency of organic solar cells is the use of tailor-designed buffer layers to improve the charge transport process. High-efficiency bulk heterojunction (BHJ) solar cells have been obtained by introducing hollow core polyaniline (PANI) nanofibers as a buffer layer. An improved power conversion efficiency in polymer solar cells (PSCs) was demonstrated through the incorporation of electrospun hollow core PANI nanofibers positioned between the active layer and the electrode. PANI hollow nanofibers improved buffer layer structural properties, enhanced optical absorption, and induced a more balanced charge transfer process. Solar cell photovoltaic parameters also showed higher open-circuit voltage (+ 40.3%) and higher power conversion efficiency (+ 48.5%) than conventional architecture BHJ solar cells. Furthermore, the photovoltaic cell developed achieved the highest reported efficiency value ever reached for an electrospun fiber-based solar cell (PCE = 6.85%). Our results indicated that PANI hollow core nanostructures may be considered an effective material for high-performance PSCs and potentially applicable to other fields, such as fuel cells and sensors.

Sign in / Sign up

Export Citation Format

Share Document