scholarly journals Photocatalytic hydrogen evolution by co-catalyst-free TiO2/C bulk heterostructures synthesized under mild conditions

RSC Advances ◽  
2020 ◽  
Vol 10 (21) ◽  
pp. 12519-12534 ◽  
Author(s):  
Claudio Imparato ◽  
Giuseppina Iervolino ◽  
Marzia Fantauzzi ◽  
Can Koral ◽  
Wojciech Macyk ◽  
...  

Defective TiO2/C bulk heterostructures exhibit visible light photoresponsivity and remarkable H2 evolution rates under both UV and visible light irradiation.

2013 ◽  
Vol 4 ◽  
pp. 949-955 ◽  
Author(s):  
Liang Wei ◽  
Yongjuan Chen ◽  
Jialin Zhao ◽  
Zhaohui Li

In this study, NiS/ZnIn2S4 nanocomposites were successfully prepared via a facile two-step hydrothermal process. The as-prepared samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM). Their photocatalytic performance for hydrogen evolution under visible light irradiation was also investigated. It was found that the photocatalytic hydrogen evolution activity over hexagonal ZnIn2S4 can be significantly increased by loading NiS as a co-catalyst. The formation of a good junction between ZnIn2S4 and NiS via the two step hydrothermal processes is beneficial for the directional migration of the photo-excited electrons from ZnIn2S4 to NiS. The highest photocatalytic hydrogen evolution rate (104.7 μmol/h), which is even higher than that over Pt/ZnIn2S4 nanocomposite (77.8 μmol/h), was observed over an optimum NiS loading amount of 0.5 wt %. This work demonstrates a high potential of the developing of environmental friendly, cheap noble-metal-free co-catalyst for semiconductor-based photocatalytic hydrogen evolution.


2017 ◽  
Vol 46 (40) ◽  
pp. 13793-13801 ◽  
Author(s):  
Tengfei Wu ◽  
Peifang Wang ◽  
Jin Qian ◽  
Yanhui Ao ◽  
Chao Wang ◽  
...  

A highly efficient noble metal free Ni2P–CdS/g-C3N4 composite was constructed based on the concept of combining heterojunction engineering with co-catalyst modification.


2018 ◽  
Vol 8 (5) ◽  
pp. 1375-1382 ◽  
Author(s):  
Junying Liu ◽  
Wenjian Fang ◽  
Zhidong Wei ◽  
Zhen Qin ◽  
Zhi Jiang ◽  
...  

Metallic 1T-LixMoS2 is an effective co-catalyst for photocatalytic hydrogen evolution over ZnIn2S4 because of its high electrical conductivity and high densities of active sites.


2020 ◽  
Vol 16 ◽  
Author(s):  
Yuxue Wei ◽  
Honglin Qin ◽  
Jinxin Deng ◽  
Xiaomeng Cheng ◽  
Mengdie Cai ◽  
...  

Introduction: Solar-driven photocatalytic hydrogen production from water splitting is one of the most promising solutions to satisfy the increasing demands of a rapidly developing society. CdS has emerged as a representative semiconductor photocatalyst due to its suitable band gap and band position. However, the poor stability and rapid charge recombination of CdS restrict its application for hydrogen production. The strategy of using a cocatalyst is typically recognized as an effective approach for improving the activity, stability, and selectivity of photocatalysts. In this review, recent developments in CdS cocatalysts for hydrogen production from water splitting under visible-light irradiation are summarized. In particular, the factors affecting the photocatalytic performance and new cocatalyst design, as well as the general classification of cocatalysts, are discussed, which includes a single cocatalyst containing noble-metal cocatalysts, non-noble metals, metal-complex cocatalysts, metal-free cocatalysts, and multi-cocatalysts. Finally, future opportunities and challenges with respect to the optimization and theoretical design of cocatalysts toward the CdS photocatalytic hydrogen evolution are described. Background: Photocatalytic hydrogen evolution from water splitting using photocatalyst semiconductors is one of the most promising solutions to satisfy the increasing demands of a rapidly developing society. CdS has emerged as a representative semiconductor photocatalyst due to its suitable band gap and band position. However, the poor stability and rapid charge recombination of CdS restrict its application for hydrogen production. The strategy of using a cocatalyst is typically recognized as an effective approach for improving the activity, stability, and selectivity of photocatalysts. Methods: This review summarizes the recent developments in CdS cocatalysts for hydrogen production from water splitting under visible-light irradiation. Results: Recent developments in CdS cocatalysts for hydrogen production from water splitting under visible-light irradiation are summarized. The factors affecting the photocatalytic performance and new cocatalyst design, as well as the general classification of cocatalysts, are discussed, which includes a single cocatalyst containing noble-metal cocatalysts, non-noble metals, metal-complex cocatalysts, metal-free cocatalysts, and multi-cocatalysts. Finally, future opportunities and challenges with respect to the optimization and theoretical design of cocatalysts toward the CdS photocatalytic hydrogen evolution are described. Conclusion: The state-of-the-art CdS for producing hydrogen from photocatalytic water splitting under visible light is discussed. The future opportunities and challenges with respect to the optimization and theoretical design of cocatalysts toward the CdS photocatalytic hydrogen evolution are also described.


2020 ◽  
Vol 10 (6) ◽  
pp. 1609-1618 ◽  
Author(s):  
Chao Zhang ◽  
Jiandong Liu ◽  
Xingliang Liu ◽  
Shiai Xu

Reaction mechanism for the higher photocatalytic performance of H2 production of g-C3N4NSs/TC1 under visible light irradiation (λ ≥ 400 nm).


2018 ◽  
Vol 47 (35) ◽  
pp. 12188-12196 ◽  
Author(s):  
Lu Chen ◽  
Huijuan Huang ◽  
Yuanhui Zheng ◽  
Wenhao Sun ◽  
Yi Zhao ◽  
...  

Noble-metal-free Ni3N/g-C3N4 heterojunctions that show high photocatalytic hydrogen evolution activity comparable to platinized g-C3N4 were successfully synthesized.


Sign in / Sign up

Export Citation Format

Share Document