A solution for Ethernet-based real-time communication network of distributed numerical control system

2009 ◽  
Author(s):  
Tao Lin ◽  
Jiang Tingbiao ◽  
Zhang Xiangli
Keyword(s):  
Communication Network ◽  
Control System ◽  
Real Time ◽  
Numerical Control ◽  
Numerical Control System

A Soft CNCS on Windows-XP

2010 ◽  
Vol 97-101 ◽  
pp. 2011-2014
Author(s):  
Lei Zhou ◽  
Jian Gang Li ◽  
Xiao Yang ◽  
Ze Xiang Li
Keyword(s):  
Operating System ◽  
Control System ◽  
Path Planning ◽  
Real Time ◽  
Numerical Control ◽  
Milling Machine ◽  
Numerical Control System ◽  
Cnc System ◽  
Time Path ◽  
Windows Xp

In this paper, a soft CNCS (Computerized Numerical Control System) works on Windows-XP operating system is presented. The comparison between soft CNC and traditional CNC system is discussed. The structure of soft CNC system is introduced as follow. The realizations of each real time module, such as real time path planning and interpolation, real time close-loop controller, real time safety detection, are introduced in detail. The real time tasks are based on a real time kernel. In the end, an application of the soft CNC system is realized on a 3-axis milling machine. The machining result shows it works well.

scholarly journals Real Time Numerical Control System for Metal Molds and Dies Machining(4th Report). Development of Automatic Rough Cutting Function.

1991 ◽  
Vol 57 (12) ◽  
pp. 2145-2150
Author(s):  
Hiroshi SUZUKI ◽  
Yutaka KURODA ◽  
Masafumi SAKAMOTO ◽  
Shinya HARAMAKI ◽  
Naoyuki MOTOMURA
Keyword(s):  
Control System ◽  
Real Time ◽  
Numerical Control ◽  
Numerical Control System

Development of CNC System for Machining of Grooves in Automobile Synchronization Regulators Sleeve

2009 ◽  
Vol 626-627 ◽  
pp. 571-576 ◽  
Author(s):  
Dong Xiang Chen ◽  
Jia Li ◽  
Chen Zhao
Keyword(s):  
Control System ◽  
Real Time ◽  
Numerical Control ◽  
Open Architecture ◽  
Software System ◽  
Numerical Control System ◽  
Cnc System ◽  
Improve Efficiency

On the basis of analyzing the shortcomings of the current technics for grooves machining, this paper deals with the development of Numerical Control System for machining of grooves in automobile synchronization regulator sleeve, which holds first-rate technics. In order to improve efficiency and precision of grooves machining and reduce cost of the cutter, Hypocycloid-based technique together with interpolation is introduced and studied. With IPC as system platform and PMAC (Programmable Multiple-Axes Controller) as the controlling center of the system, the open architecture of “PC-Based” is used in the CNC system and the framework of the CNC hardware is developed. According to the ideas of modularization and real-time multi-task scheduler, the CNC software system is carved into many modules and the framework of the CNC software is developed.

Auto-Control of Defocus Distance during Filling Laser Welding of Ti-Alloy with Wire

2011 ◽  
Vol 287-290 ◽  
pp. 2456-2459 ◽  
Author(s):  
Xin Song Chen ◽  
Wei Yao ◽  
Ai Qin Duan
Keyword(s):  
Control System ◽  
Laser Welding ◽  
Real Time ◽  
Welding Process ◽  
Numerical Control ◽  
Ti Alloy ◽  
Numerical Control System ◽  
Weld Quality ◽  
The Stability

The defocus distance is one of the most important factors during filling laser welding with wire. Keeping defocus distances stability is the pre-condition to acquire the stable weld quality. In this paper, a QUANTA laser camera was used to measure the defocus distance, and it is compensated in real time through the numerical control system. The results reveal that the fixed defocus distances can be acquired using this system. And the experiments by using auto-controlling method of the defocus distance show that the stability of welding process can be improved greatly and the good weld quality can be easy to be obtained.

scholarly journals Real Time Numerical Control System for Metal Molds and Dies Machining

1987 ◽  
Vol 53 (8) ◽  
pp. 1189-1194
Author(s):  
Hiroshi SUZUKI ◽  
Kazuo YAMAZAKI ◽  
Tetsutaro HOSHI ◽  
Masayasu FUTAGAWA
Keyword(s):  
Control System ◽  
Real Time ◽  
Numerical Control ◽  
Numerical Control System

scholarly journals Real Time Numerical Control System for Metal Molds and Dies Machining

1987 ◽  
Vol 53 (12) ◽  
pp. 1952-1958 ◽  
Author(s):  
Hiroshi SUZUKI ◽  
Kazuo XYAMAZAKI ◽  
Tetsutaro HOSHI ◽  
Yoshihisa KUROMIYA
Keyword(s):  
Control System ◽  
Real Time ◽  
Numerical Control ◽  
Numerical Control System

The Research of Real-Time Trajectory Interpolation Based on Open Numerical Control System

2013 ◽  
Vol 650 ◽  
pp. 455-459
Author(s):  
Juan Li ◽  
Mao Li Wang ◽  
Hui Juan Hao
Keyword(s):  
Control System ◽  
Real Time ◽  
Motion Control ◽  
Control Function ◽  
Numerical Control ◽  
Numerical Control System ◽  
Motion Controller ◽  
Open Numerical Control System ◽  
Sequential Logic ◽  
Trajectory Interpolation

This paper researches on Open Numerical Control System based on the PC platform, in which the motion controller works as the control core, can realize the multiaxis motion control in real time and the sequential logic control. This paper sets out from the hardware structure, use the Real-time trajectory interpolation algorithm, and choose the proper motion-control function. it can realize fast, stable and continuous movement with multistage path, and ensure that the system is open, real-time and reconfigurable.

Sign in / Sign up

Export Citation Format

Share Document