Performance evaluation of multicarrier PWM methods for cascaded H-Bridge multilevel inverter

Author(s):  
E.T. Renani ◽  
M.F.M. Elias ◽  
N.A. Rahim
2021 ◽  
Vol 20 (2) ◽  
pp. 1-7
Author(s):  
Jahanzeb - ◽  
Shahrin Md. Ayob ◽  
Saifullah Khan ◽  
Mohd Zaki Daud ◽  
Razman Ayop

There is always a need to create efficient and optimized converters to deliver the best possible results to achieve a better THD profile in the waveform output. One way is by controlling the switching of the power switches of the converters using appropriate modulation schemes. While numerous works have been done in proposing new switching modulation strategies for multilevel inverters, this work will compare multicarrier PWM and near-to-level control (NLC) modulation schemes. In this paper, multicarrier PWM variants, namely, PD-PWM, POD-PWM, and APOD-PWM, are designed and simulated. Their voltage THD and spectrum performance are discussed when applied to single-phase 7, 9, and 11-level cascaded multilevel inverters. Then NLC modulation will be designed and applied to similar multilevel inverter circuits. It will be shown that the NLC exhibits some superior performances compared to PWM-based but with several drawbacks that can be optimized. 


Author(s):  
Chinnapettai Ramalingam Balamurugan ◽  
S.P. Natarajan ◽  
T.S. Anandhi

The multi level inverter system is habitually exploited in AC drives, when both reduced harmonic contents and high power are required. In this paper, a new topology for three phase asymmetrical multilevel inverter employing reduced number of switches is introduced. With less number of switches, the cost, space and weight of the circuit are automatically reduced. This paper discusses the new topology, the switching strategies and the operational principles of the chosen inverter. Simulation is carried out using MATLAB-SIMULINK. Various conventional PWM techniques that are appropriate to the chosen circuit such as PDPWM, PODPWM, APODPWM, VFPWM and COPWM are employed in this work. COPWM technique affords the less THD value and also affords a higher fundamental RMS output voltage.


Author(s):  
Saminathan S & Dr. Ranjithkumar K

In this work, a new modular multilevel inverter topology is introduced for a single phase grid connected Photovoltaic system. This multilevel inverter use less number of switches to generate seven levels compared to other conventional multilevel inverters. This requires only one isolated dc source to operate. So it is suitable for renewable energy application. This inverter is designed by submodule configuration; each sub module contains two switches and one DC link capacitor. The sub modules will be added to the inverter depending on number of levels. The voltage balancing of DC link capacitor is carried out by Y matrix PWM technique. Because of Y matrix PWM technique, the inverter gets a self capacitor voltage balancing ability. So there is no need of external devices required for balancing the voltage of capacitor. A PLL for grid integration and LCL filter are designed and integrated with this inverter. The simulation of proposed system is carried out by MATLAB/SIMULINK and performance of THD is monitored as per standards


Sign in / Sign up

Export Citation Format

Share Document