Comparison analysis of Local Stability Criteria for the DC Distribution Power System based on Impedance and Admittance

Author(s):  
Qiang Huang ◽  
Yang Liu ◽  
Yubo Yuan ◽  
Xinyao Si ◽  
Pengpeng Pan
2015 ◽  
Vol 764-765 ◽  
pp. 127-131
Author(s):  
Yang Yang ◽  
Kang Min Lee ◽  
Keun Yeong Oh ◽  
Sung Bin Hong

The current local stability criteria (KBC2009, AISC2010) are enacted through theoretical and experimental studies of ordinary steels, but the mechanical properties of high strength steels are different from ordinary steels. The high strength steel in the applicability of design criteria should be needed to review because of increasing market demanding for high strength steel in the high-rise and long span buildings. In this study, stub columns of H-shaped and box section with various steel grades subjected to concentric loading were investigated, and these steels were checked to the applicability of current local stability criteria. The difference between the ordinary steel and high strength steel was compared. As a result of comparison with various steel grades, most specimens were satisfied with the design criteria, but some specimens with lower tensile strength were not reached the required strength. It is considered that the uncertainty of material was the higher when the tensile strength of material was the lower.


2000 ◽  
Vol 08 (03) ◽  
pp. 255-261 ◽  
Author(s):  
DEBASIS MUKHERJEE ◽  
SANTANU RAY ◽  
DILIP KUMAR SINHA

This article concentrates on the study of delay effect of a mangrove ecosystem of detritus, detritivores and predator of detritivores. Local stability criteria are derived in the absence of delays. Conditions are found out for which the system undergoes a Hopf bifurcation. Further conditions are derived for which there can be no change in stability.


Sign in / Sign up

Export Citation Format

Share Document