scholarly journals Study on Water Disaster Prevention and Control Technology under Condition of Extra-thick Coal Seam with Slicing Fullmechanized Caving Mining

2018 ◽  
Vol 53 ◽  
pp. 04024
Author(s):  
Jianghua Li ◽  
Yuguang Lian ◽  
Hongjie Li
Keyword(s):  
Coal Seam ◽  
Field Observation ◽  
Prevention And Control ◽  
Control Method ◽  
Disaster Prevention ◽  
Cretaceous Rock ◽  
Thick Coal Seam ◽  
And Control ◽  
Water Disaster ◽  
Mining Height

Some coal seams belong to cretaceous strata in the east of Inner Mongolia, China. There are obvious differences of rock characteristics and mechanical properties between Cretaceous and Carboniferous- Permian strata. The overburden failure characteristics of extra-thick coal seam with slicing full-mechanized caving mining are studied through rock mechanics experiment, field observation and theoretical analysis and so on. Water disaster prevention and control method of roof and goaf is put forward under the condition of extra-thick coal seam with slicing full-mechanized caving mining. The final research results include: (1) The rock of cretaceous strata has low strength and soft characteristic, its stability is very poor, cretaceous rock belongs to weak type; (2) Under the condition of extra-thick coal seam with slicing full-mechanized caving mining, the ratio between caving zone and mining height of field observation result is 4.58～4.74, the observation results of two boreholes are close; (3) It is significantly effective to prevent and control water disaster from goaf through roof hole drainage method, coal and rock safety pillar remain method is used to limit mining height under the Tertiary gravel aquifer, which makes the working face exploit safely.

scholarly journals System for Prevention and Control of Old Goaf Water during Coal Mine Re-mining

2021 ◽  
Author(s):  
Shuning Dong ◽  
Xiaolong Li ◽  
Liuzhu Ma
Keyword(s):  
Coal Seam ◽  
Coal Mine ◽  
Prevention And Control ◽  
Small Scale ◽  
Target Area ◽  
Geophysical Exploration ◽  
Blind Area ◽  
Mining Face ◽  
And Control ◽  
Water Disaster

Abstract One integrated mine was currently threatened with an old goaf water disaster, therefore, the development of an advanced detection-guarantee system for roadway excavation with no blind area was imperative. Further, multiple geophysical exploration in combination with two types of boreholes were used to explore and drain water technology, with the anomalous geophysical area as the target area, The conventional borehole with the largest water outflow was taken as the target spot, at a low elevation of the mining area, and a remote directional borehole was used to drill into the old goaf along the stable rock strata below the coal seam floor to intercept the dynamic recharge water, which increased the efficiency of roadway excavation 4–9 times. The ‘isolated island’ old goaf water in the mining face was controlled through multiple geophysical exploration combined with the full-coverage exploration technology by conventional boreholes, and the water-rich anomalous area and geological anomalous area were determined, thus ensuring the safety of the mining face in terms of old goaf water. The technology for advanced short-distance exploration, advanced estimate, roadway exploration, and dynamic old goaf water with drainage was used to comprehensively guarantee real-time, safe mining. This system for the prevention and control of old goaf water was applied to a control project for the old goaf water disaster in the 101 mining face. At present, 1.37 Mt of coal has been safely mined from this mining face. The technical system has improved The Detailed Rules for Water Disaster Prevention and Control of Coal Mine (NCMSA 2018), and improved the technology for the prevention and control of old goaf water under conditions where the upper portion in the same coal seam was destroyed by a small-scale coal mine and re-mining.

Development of Mine Water Source Identification System Based on MapObjects

2014 ◽  
Vol 602-605 ◽  
pp. 2195-2198
Author(s):  
De Min Liu ◽  
Liang Jing Zhang ◽  
Lian Tao Zhao ◽  
Zun Cai Yue
Keyword(s):  
Mine Water ◽  
Source Identification ◽  
Prevention And Control ◽  
Water Source ◽  
Identification System ◽  
Disaster Prevention ◽  
Mine Water Disaster ◽  
And Control ◽  
Water Disaster ◽  
Lower Group

In order to realize the mine water source identification and to prevent water accidents, taking Xinglong Zhuang coal mine’s lower group coal mining as an example, based on the analysis of mine hydrogeological conditions, the mine water source identification system was designed by using the software of MapObjects powerful spatial analysis ability and Bayesian classification analytical method. The software can achieve mine water source identification and provide a certain basis for mine water disaster prevention and control.

scholarly journals Study on the “Pressure Relief and Yielding Support” Joint Prevention and Control Technology for the Weak Impact Roadway in the Extremely Thick Coal Seam

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Zengde Yin ◽  
Jinxiao Liu ◽  
Wenbin Sun ◽  
Kebao Guo ◽  
Feng Zhang
Keyword(s):  
Coal Seam ◽  
Prevention And Control ◽  
Surrounding Rock ◽  
Control Technology ◽  
Pressure Relief ◽  
Thick Coal Seam ◽  
Roadway Support ◽  
Yielding Support ◽  
And Control ◽  
The Impact

Weak impact occurs during roadway excavation in some extremely thick coal seams in China. Although this hazard is not enough to destroy the roadway, it will cause fracturing and large deformation of the roadway surrounding rock, resulting in the fracturing of bolts and anchor cables and bringing great difficulties to roadway support. In the hope of solving this problem, firstly, the reason for impact occurrence in the roadway of the extremely thick coal seam is analyzed from the perspective of energy. Then, the surrounding rock fracture evolution in such a roadway is explored by means of numerical simulation, microseism, and borehole observation. Furthermore, the “pressure relief and yielding support” joint prevention and control technology is proposed and applied to Yili No. 1 Coal Mine. The field engineering application results show that the joint prevention and control technology can effectively reduce the impact energy and ensure the stability of the roadway surrounding rock in the extremely thick coal seam. The research findings can provide a theoretical foundation for the roadway support of the same type.

Sign in / Sign up

Export Citation Format

Share Document