scholarly journals Optimal Dispatch of Regional Integrated Heating and Power System Based on Differential Thermal Inertia Model

2021 ◽  
Vol 256 ◽  
pp. 02018
Author(s):  
Shiyuan Ni ◽  
Yi Lin ◽  
Defei Yao ◽  
Guilian Wu ◽  
Zehao Wang ◽  
...  
Keyword(s):  
Thermal Inertia ◽  
Single Layer ◽  
Energy System ◽  
Energy Utilization ◽  
Utilization Efficiency ◽  
Optimization Scheme ◽  
Optimal Dispatch ◽  
Integrated Energy System ◽  
Inertia Model ◽  
Indoor Comfort

As the physical carrier of Energy Internet, regional integrated energy system (RIES) has become an important role for improving comprehensive energy utilization efficiency. First, a subtle thermodynamic model of buildings and water-heating network was constructed based on differential thermal inertia model. Different from the traditional single-layer wall thermal inertial model, this paper constructed multi-layer wall thermal model. Then, an optimization scheme combining electricity and heat was established. The optimization results show that, compared with the traditional single-layer wall thermal inertia model, the proposed multi-layer wall thermal inertia model has better performance. The proposed comprehensive energy optimization scheme can reduce the cost of electricity while maintaining indoor comfort, and can provide a reference for the system operation status for distribution network dispatching.

Regional integrated energy system schemes selection based on risk expectation and Mahalanobis-Taguchi system

2021 ◽  
pp. 1-18
Author(s):  
Jiahang Yuan ◽  
Yun Li ◽  
Xinggang Luo ◽  
Lingfei Li ◽  
Zhongliang Zhang ◽  
...  
Keyword(s):  
Energy Demand ◽  
Choquet Integral ◽  
Subjective Evaluation ◽  
Risk Attitude ◽  
Energy System ◽  
Energy Utilization ◽  
Utilization Efficiency ◽  
Energy Structure ◽  
Fuzzy Measures ◽  
Integrated Energy System

Regional integrated energy system (RIES) provides a platform for coupling utilization of multi-energy and makes various energy demand from client possible. The suitable RIES composition scheme will upgrade energy structure and improve integrated energy utilization efficiency. Based on a RIES construction project in Jiangsu province, this paper proposes a new multi criteria decision-making (MCDM) method for the selection of RIES schemes. Because that subjective evaluation on RIES schemes benefit under criteria has uncertainty and hesitancy, intuitionistic trapezoidal fuzzy number (ITFN) which has the better capability to model ill-known quantities is presented. In consideration of risk attitude and interdependency of criteria, a new decision model with risk coefficients, Mahalanobis-Taguchi system and Choquet integral is proposed. Firstly, the decision matrices given by experts are normalized, and then are transformed to minimum expectation matrices according to different risk coefficients. Secondly, the weights of criteria from different experts are calculated by Mahalanobis-Taguchi system. Mobius transformation coefficients based on interaction degree are to calculate 2-order additive fuzzy measures, and then the comprehensive weights of criteria are obtained by fuzzy measures and Choquet integral. Thirdly, based on group decision consensus requirement, the weights of experts are obtained by the maximum entropy and grey correlation. Fourthly, the minimum expectation matrices are aggregated by the intuitionistic trapezoidal fuzzy Bonferroni mean operator. Thus, the ranking result according to the comparison rules using the minimum expectation and the maximum expectation is obtained. Finally, an illustrative example is taken in the present study to make the proposed method comprehensible.

scholarly journals Optimal Configuration of Integrated Energy System Based on Energy-Conversion Interface

2019 ◽  
Vol 9 (7) ◽  
pp. 1367 ◽  
Author(s):  
Zicong Yu ◽  
Xiaohua Yang ◽  
Lu Zhang ◽  
Yongqiang Zhu ◽  
Ruihua Xia ◽  
...  
Keyword(s):  
Energy Conversion ◽  
Energy System ◽  
Optimal Configuration ◽  
Energy Utilization ◽  
Utilization Efficiency ◽  
Environmental Cost ◽  
Maintenance Cost ◽  
Configuration Model ◽  
Energy Prices ◽  
Integrated Energy System

Aiming at the optimal configuration of a regional integrated energy system (IES), this paper proposes an energy-conversion interface (ECI) model that simplifies the complex multienergy network into a multi-input–multioutput dual-port network, consequently achieving the energy-coupling relationship between the energy-supply side and the demand side. An optimized configuration model of the ECI was constructed by considering economic performance, such as device-installation cost, operation and maintenance cost, and environmental cost, as well as energy-saving performance, such as energy-utilization efficiency. Then, the ECI optimal-configuration model was established by taking a campus in northern China as an example. To verify the validity of the model, device planning quantity and daily energy scheduling of the integrated energy system of the campus were obtained by solving the model with the particle-swarm optimization method. Finally, sensitivity analysis of the system to energy prices and the reweight approach for the targets are also given in this paper, providing a decision-making basis for system planning.

scholarly journals An Energy Efficiency Index Formation and Analysis of Integrated Energy System Based on Exergy Efficiency

2021 ◽  
Vol 9 ◽  
Author(s):  
Huiling Su ◽  
Qifeng Huang ◽  
Zhongdong Wang
Keyword(s):  
Energy Efficiency ◽  
Evaluation Model ◽  
Second Law Of Thermodynamics ◽  
Energy System ◽  
Efficiency Index ◽  
Exergy Efficiency ◽  
Energy Utilization ◽  
Utilization Efficiency ◽  
Efficiency Evaluation ◽  
Integrated Energy System

In the context of the energy crisis and environmental deterioration, the integrated energy system (IES) based on multi-energy complementarity and cascaded utilization of energy is considered as an effective way to solve these problems. Due to the different energy forms and the various characteristics in the IES, the coupling relationships among various energy forms are complicated which enlarges the difficulty of energy efficiency evaluation of the IES. In order to flexibly analyze the energy efficiency of the IES, an operation efficiency evaluation model for the IES is established. First, energy utilization efficiency (EUE) and exergy efficiency (EXE) are proposed based on the first/second law of thermodynamics. Second, the energy efficiency models for five processes and four subsystems of the IES are formed. Lastly, an actual commercial-industrial park with integrated energy is employed to validate the proposed method.

scholarly journals Analysis of Energy Utilization Efficiency of Integrated Energy System

2020 ◽  
Vol 546 ◽  
pp. 022036
Author(s):  
Jianmin Ye ◽  
Qingwei Wang ◽  
Yongli Wang ◽  
Feifei Huang ◽  
Yang Ma ◽  
...  
Keyword(s):  
Energy System ◽  
Energy Utilization ◽  
Utilization Efficiency ◽  
Integrated Energy System

scholarly journals Optimal scheduling of Park level integrated energy system considering electrothermal coupling

2021 ◽  
Vol 236 ◽  
pp. 02008
Author(s):  
LIU Dunnan ◽  
Gao Yuan ◽  
Wang Lingxiang ◽  
Liang Jiahao ◽  
Wang Zhenyu ◽  
...  
Keyword(s):  
Demand Response ◽  
Electric Heating ◽  
Energy System ◽  
Optimal Scheduling ◽  
Energy Utilization ◽  
Utilization Efficiency ◽  
Total Energy Consumption ◽  
Integrated Energy System ◽  
Heating Load ◽  
Operation Cost

Considering the inherent characteristics of the park heating load, such as transmission delay, fuzzy heating comfort, etc., it can be used as a flexible load to participate in the optimal scheduling. Aiming at the minimum operation cost of the integrated energy system in the park, a collaborative optimal scheduling model of the park's integrated energy system with the participation of comprehensive demand response of electric heating load is constructed. The simulation results show that, compared with the optimization results of traditional power demand response, the application of integrated demand response of electric heating load improves the flexibility of production of cogeneration units in the park, reduces the total energy consumption cost of demand side users and the operation cost of the system on the premise of ensuring the balance of supply and demand of the system, improves the energy utilization efficiency, and realizes the environmental protection and economy of the system function.

Evaluation of Energy Efficiency for a CCHP System With Available Microturbine

2007 ◽  
Author(s):  
H. X. Liang ◽  
Q. W. Wang
Keyword(s):  
Gas Turbine ◽  
Waste Heat ◽  
Energy System ◽  
Primary Energy ◽  
Economic Benefits ◽  
Optimal Operation ◽  
Energy Utilization ◽  
Utilization Efficiency ◽  
Energetic Efficiency ◽  
Efficiency Evaluation

This paper deals with the problem of energy utilization efficiency evaluation of a microturbine system for Combined Cooling, Heating and Power production (CCHP). The CCHP system integrates power generation, cooling and heating, which is a type of total energy system on the basis of energy cascade utilization principle, and has a large potential of energy saving and economical efficiency. A typical CCHP system has several options to fulfill energy requirements of its application, the electrical energy can be produced by a gas turbine, the heat can be generated by the waste heat of a gas turbine, and the cooling load can be satisfied by an absorption chiller driven by the waste heat of a gas turbine. The energy problem of the CCHP system is so large and complex that the existing engineering cannot provide satisfactory solutions. The decisive values for energetic efficiency evaluation of such systems are the primary energy generation cost. In this paper, in order to reveal internal essence of CCHP, we have analyzed typical CCHP systems and compared them with individual systems. The optimal operation of this system is dependent upon load conditions to be satisfied. The results indicate that CCHP brings 38.7 percent decrease in energy consumption comparing with the individual systems. A CCHP system saves fuel resources and has the assurance of economic benefits. Moreover, two basic CCHP models are presented for determining the optimum energy combination for the CCHP system with 100kW microturbine, and the more practical performances of various units are introduced, then Primary Energy Ratio (PER) and exergy efficiency (α) of various types and sizes systems are analyzed. Through exergy comparison performed for two kinds of CCHP systems, we have identified the essential principle for high performance of the CCHP system, and consequently pointed out the promising features for further development.

scholarly journals Theoretical study and case analysis for a pre-dried pyrolysis coupled lignite-fired power system

2018 ◽  
Author(s):  
Ming Liu ◽  
Rongtang Liu ◽  
Junjie Yan
Keyword(s):  
Low Temperature ◽  
Case Analysis ◽  
Theoretical Models ◽  
Energy System ◽  
Energy Utilization ◽  
Utilization Efficiency ◽  
Low Rank ◽  
Drying Process ◽  
Heat Value ◽  
Low Temperature Pyrolysis

Lignite, a kind of low rank coal, has the characteristics of high moisture, high volatile, high ash and low heat value. The low-temperature pyrolysis technology is potential to improve the utilization efficiency of lignite. Therefore, a lignite-based energy system integrated with pre-drying and low-temperature pyrolysis was proposed in this paper. To assess the influence of pre-drying process, theoretical models were developed based on thermodynamics, and a case analysis was then performed to get the quantitative effect of pre-drying on efficiency of energy utilization. Results show that pre-drying on PPPS theoretical model can significantly improve the utilization of lignite by 1.46%.Keywords: Lignite; Pre-drying; Low-temperature pyrolysis; Energy efficiency; Case analysis.   

Sign in / Sign up

Export Citation Format

Share Document