scholarly journals Hydrodynamic education with rheoscopic fluid

2019 ◽  
Vol 213 ◽  
pp. 02014
Author(s):  
Daniel Duda ◽  
Marek Klimko ◽  
Radek Škach ◽  
Jan Uher ◽  
Václav Uruba

We present a educational poster supporting the subject „Mechanics of fluids I“, which the students evaluate to be difficult mainly due to abstractness. Our goal is to show in vivo the behavior, especially the non-linearity, of various flows transiting into turbulence. The fluid motion is visualized by using the rheoscopic fluid, which consist of water and the dust of mica, whose particles are longitudinal and shiny resulting into easily observable reflections, when the particles coherently orient along the maximum stress. This happens mainly in shear layers, e.g. at the boundary between vortex core and envelope. An example of flow transiting into turbulence is the Taylor-Couette flow between two concentric cylinders, which with increasing Taylor number passes through various regimes from fully laminar bearing flow through the Taylor vortex flow (TVF) and later Wavy vortex flow (WVF) up to Turbulent Taylor vortices regime (TTV) and, finally, the regime of featureless turbulence.

1974 ◽  
Vol 96 (1) ◽  
pp. 28-35 ◽  
Author(s):  
R. C. DiPrima ◽  
J. T. Stuart

At sufficiently high operating speeds in lightly loaded journal bearings the basic laminar flow will be unstable. The instability leads to a new steady secondary motion of ring vortices around the cylinders with a regular periodicity in the axial direction and a strength that depends on the azimuthial position (Taylor vortices). Very recently published work on the basic flow and the stability of the basic flow between eccentric circular cylinders with the inner cylinder rotating is summarized so as to provide a unified description. A procedure for calculating the Taylor-vortex flow is developed, a comparison with observed properties of the flow field is made, and formulas for the load and torque are given.


Author(s):  
Vale´rie Lepiller ◽  
Jong-Yeon Hwang ◽  
Arnaud Prigent ◽  
Kyung-Soo Yang ◽  
Innocent Mutabazi

Both experimental and numerical studies have shown that the Taylor vortices are destabilized by a weak radial temperature gradient and transit to spiral vortices with a small inclination. For a large radial temperature gradient, from Taylor vortices emerges a disordered pattern with some windows of spiral vortices. Spatio-temporal characteristics of resulting pattern are presented.


1973 ◽  
Vol 58 (3) ◽  
pp. 547-560 ◽  
Author(s):  
J. E. Burkhalter ◽  
E. L. Koschmieder

Experiments studying steady supercritical Taylor vortex flow have been made using pairs of long cylinders with two different radius ratios, three fluids of different viscosities and three different end boundaries for the fluid column. The emphasis in these experiments is on the determination of the wavelength of the Taylor vortices and the size of the end rings. The wavelength which one measures in a finite cylinder differs from the wavelengths found theoretically for infinitely long cylinders. Provided that the end effects were properly taken into account, the wavelength of singly periodic Taylor vortices in aninfinitely long cylinder was found to remain constant between T/Tc = 1 and T/Tc, ≈ 80 in experiments with radius ratios η = 0·505 and η = 0·727. Further studies of Taylor vortex flow at very high Taylor numbers, where the vortices are either doubly periodic or truly turbulent, showed that the wavelength increases under these conditions. However, the observed wavelengths were no longer unique but distributed statistically around a wavelength larger than the critical wavelength.


Author(s):  
Emna Berrich ◽  
Fethi Aloui ◽  
Jack Legrand

In the simplest and original case of study of the Taylor–Couette TC problems, the fluid is contained between a fixed outer cylinder and a concentric inner cylinder which rotates at constant angular velocity. Much of the works done has been concerned on steady rotating cylinder(s) i.e. rotating cylinders with constant velocity and the various transitions that take place as the cylinder(s) velocity (ies) is (are) steadily increased. On this work, we concentrated our attention in the case in which the inner cylinder velocity is not constant, but oscillates harmonically (in time) clockwise and counter-clockwise while the outer cylinder is maintained fixed. Our aim is to attempt to answer the question if the modulation makes the flow more or less stable with respect to the vortices apparition than in the steady case. If the modulation amplitude is large enough to destabilise the circular Couette flow, two classes of axisymmetric Taylor vortex flow are possible: reversing Taylor Vortex Flow (RTVF) and Non-Reversing Taylor Vortex Flow (NRTVF) (Youd et al., 2003; Lopez and Marques, 2002). Our work presents an experimental investigation of the effect of oscillatory Couette-Taylor flow, i.e. both the oscillation frequency and amplitude on the apparition of RTVF and NRTVF by analysing the instantaneous and local mass transfer and wall shear rates evolutions, i.e. the impact of vortices at wall. The vortices may manifest themselves by the presence of time-oscillations of mass transfer and wall shear rates, this generally corresponds to an instability apparition even for steady rotating cylinder. On laminar CT flow, the time-evolution of wall shear rate is linear. It may be presented as a linear function of the angular velocity, i.e. the evolution is steady even if the angular velocity is not steady. At a “critical” frequency and amplitude, the laminar CT flow is disturbed and Taylor vortices appear. Comparing to a steady velocity case, oscillatory flow accelerate the instability apparition, i.e. the critical Taylor number corresponds to the transition is smaller than that of the steady case. For high oscillation amplitudes of the inner cylinder rotation, the mass transfer time-evolution has a sinusoidal evolution with non equal oscillation amplitudes. If the oscillation amplitude is large enough, it can destabilize the laminar Couette flow, Taylor vortices appears. The vortices direction can be deduced from the sign of the instantaneous wall shear rate time evolution.


Author(s):  
B. J. Kachoyan ◽  
P. J. Blennerhassett

AbstractThe Dean problem of pressure-driven flow between finite-length concentric cylinders is considered. The outer cylinder is at rest and the small-gap approximation is used. In a similar procedure to that of Blennerhassett and Hall [8] in the context of Taylor vortices, special end conditions are imposed in which the ends of the cylinder move with the mean flow, allowing the use of a perturbation analysis from a known basic flow. Difficulties specific to Dean flow (and more generally to non-Taylor-vortex flow) require the use of a parameter α which measures the relative strengths of the velocities due to rotation and the pressure gradient, to trace the solution from Taylor to Dean flow. Asymptotic expansions are derived for axial wavenumbers at a given Taylor number. The calculation of critical Taylor number for a given cylinder height is then carried out. Corresponding stream-function contours clearly show features not evident in infinite flow.


1979 ◽  
Vol 94 (3) ◽  
pp. 453-463 ◽  
Author(s):  
A. Barcilon ◽  
J. Brindley ◽  
M. Lessen ◽  
F. R. Mobbs

We report on a set of turbulent flow experiments of the Taylor type in which the fluid is contained between a rotating inner circular cylinder and a fixed concentric outer cylinder, focusing our attention on very large Taylor number values, i.e. \[ 10^3 \leqslant T/T_c \leqslant 10^5, \] where Tc is the critical value of the Taylor number T for onset of Taylor vortices. At such large values of T, the turbulent vortex flow structure is similar to the one observed when T – Tc is small and this structure is apparently insensitive to further increases in T. These flows are characterized by two widely separated length scales: the scale of the gap width which characterizes the Taylor vortex flow and a much smaller scale which is made visible by streaks in the form of a ‘herring-bone’-like pattern visible at the walls. These are conjectured to be Görtler vortices which arise as a result of centrifugal instability in the wall boundary layers. Ideas of marginal instability by which we postulate that both the Taylor and Görtler vortex structures are marginally unstable on their own scale seem to provide good quantitative agreement between predicted and observed Görtler vortex spacings.


Author(s):  
Mostafa Monfared ◽  
Lamia Gaied ◽  
Emna Berrich ◽  
Ebrahim Shirani ◽  
Maxence Bigerelle ◽  
...  

Couette-Taylor flow is a type of fluid flow that occurs in the annulus between differentially concentric cylinders, when the outer cylinder is fixed and the inner cylinder rotates and the rotation rate exceeds a critical value. In this research we have studied the effect of surface roughness on the hydrodynamic structures of Couette-Taylor Flow. The PIV technique has been applied for flow visualization. At first, for a smooth surface, the different flow patterns include Couette flow, Taylor vortex flow, wavy vortex flow, modulated wavy vortex flow and turbulent flow. They are investigated numerically and experimentally. The transition Taylor number for every flow regime is also taken into consideration. The results showed that the numerical results correspond quite well to the experimental data. Then, the different surface conditions for inner cylinder which are studied are: a smooth one, a sandpaper-type P180, a canvas plastic with different wire-mesh roughness. They are used to study the effects of surface roughness on the flow structures and critical Taylor numbers. The experimental results showed that the roughness causes a delay in the appearance of the first instabilities.


In an earlier paper, Blennerhassett & Hall (1979) investigated the linear stability of the flow between concentric cylinders of finite length. The inner cylinder was taken to rotate, while the outer cylinder was fixed. Furthermore, the end walls rotated such that the flow was purely circumferential. In this paper the finite amplitude development of the unstable disturbances to the flow is considered. It is found that the usual perturbation expansion of nonlinear stability theory must be modified if the cylinders are not infinitely long. The bifurcation to a Taylor vortex flow in finite cylinders is shown to be two-sided. The latter effect is shown to be a direct consequence of the finiteness of the cylinders and by taking the cylinders to be very long, we recover the results obtained previously for the infinite problem. The interaction of the two most dangerous modes of linear theory is also investigated. For certain values of the length of the cylinders the initial finite amplitude Taylor vortex flow is shown to become unstable to another class of axisymmetric disturbances. The effect of perturbing the end conditions towards the no-slip conditions appropriate to most experimental configurations is also discussed. Some discussion of the instability problem in very long cylinders with fixed ends is given.


Sign in / Sign up

Export Citation Format

Share Document