Assessing the wall effects of packed concentric cylinders and angular walls on granular bed porosity

The effect of added wall support on granular bed porosity is systematically studied to elucidate performance enhancements in filtration processes achieved by using inserts, as demonstrated experimentally (Bandelt Riess et al. in Chem Eng Technol 2018, 2021). Packed beds of spheres are simulated through discrete element method in cylinders with different internal wall configurations. Three containing systems are generated: concentric cylinders, angular walls, and a combination of both. Variations of particle size and wall friction and thickness are also considered, and the resulting granular bed porosities are analyzed. The porosity increase is proportional to the incorporated wall support; the combination of cylindrical and angular inserts displays the greatest effect (up to 26% increase). The sinusoidal porosity values near the walls are exhibited to clarify the effects. The presented method can change and evaluate granular bed porosity increments, which could lead to filtration process improvements, and the obtained behaviors and profiles can be used to explore additional effects and further systems. Graphical abstract

Natural Convection in Annulus Between Two Concentric Cylinders Partially Filled with Metal Foam Distributed with New Suggested Design

The investigation of natural convection in an annular space between two concentric cylinders partially filled with metal foam is introduced numerically. The metal foam is inserted with a new suggested design that includes the distribution of metal foam in the annular space, not only in the redial direction, but also with the angular direction. Temperatures of inner and outer cylinders are maintained at constant value in which inner cylinder temperature is higher than the outer one. Naiver Stokes equation with Boussinesq approximation is used for fluid regime while Brinkman-Forchheimer Darcy model used for metal foam. In addition, the local thermal equilibrium condition in the energy equation of the porous media is presumed to be applicable for the present investigation. CFD ANSYS FLUENT software package (version 18.2) is used as a solver to this problem. Various parameters are examined; Rayleigh number, Darcy number, and thermal conductivity ratio to study the effect of them on fluid flow and heat transfer inside the annuli space in the suggested design of metal foam layer. current model is compared with the available published results and good agreement is noticed. Results showed that as Rayleigh number increases the dominated of convection mode increases and Nusselt increases. Also, Nusselt is larger at the higher Darcy and thermal conductivity ratio. It was found that at Rayleigh of 106 and thermal conductivity ratio of 104 Nusselt reach its higher value which is 6.69 for Darcy of 0.1 and 6.77 for Darcy of 0.001. A comparison between this design and the traditional design was established for Darcy 0.001 and thermal conductivity ratio 102, and its showed a good enhancement in Nusselt number and the greatest enhancement percentage was 44% at Rayleigh equal 5*104 while the lowest percentage is 6% for Rayleigh equal106.

Research of Flow Stability of Non-Newtonian Magnetorheological Fluid Flow in the Gap between Two Cylinders

This paper deals with a mathematical modeling of flow stability of Newtonian and non-Newtonian fluids in the gap between two concentric cylinders, one of which rotates. A typical feature of the flow is the formation of a vortex flow, so-called Taylor vortices. Vortex structures are affected by the speed of the rotating cylinder and the physical properties of the fluids, i.e., viscosity and density. Analogy in terms of viscosity is assumed for non-Newtonian and magnetorheological fluids. Mathematical models of laminar, transient and turbulent flow with constant viscosity and viscosity as a function of the deformation gradient were formulated and numerically solved to analyze the stability of single-phase flow. To verify them, a physical experiment was performed for Newtonian fluids using visualizations of vortex structures—Taylor vortices. Based on the agreement of selected numerical and physical results, the experience was used for numerical simulations of non-Newtonian magnetorheological fluid flow.

Numerical and Analytical Studies of Soret-Driven Convection Flow Inside an Annular Horizontal Porous Cavity

This paper studies the species separation of a binary fluid in a porous cavity between two horizontal concentric cylinders, submitted to a temperature gradient. The thickness of the cavity is e=Ro−Ri, where Ri and Ro are the internal and external radius, respectively. The numerous previous experiments performed in thermogravitational vertical columns (TGCs) showed that in order to obtain a significant separation, the thickness of the cell must be very small, compared with its height. Therefore, in our configuration, we considered e≪Ri. The solution is assumed to be axisymmetric. Under the assumptions of parallel flow and forgotten effect, an analytical solution is obtained using Maple software, and the results are compared with those found numerically using Comsol Multiphysics. In natural convection, our results are in very good agreement with those evaluated with a regular perturbation method in powers of the dimensionless gap width ε=eRi of order 15, and with the Galerkin method. The species separation calculated for our configuration is very close to the one obtained in a TGC column of height: H=πRi. One of the main interests of the analytical solution presented here is that it can be used as a basic solution for a stability study analysis.

Well-posedness of the free surface problem on a Newtonian fluid between cylinders rotating at different speeds

When a liquid fills the semi-infinite space between two concentric cylinders which rotate at different steady speeds, how about the shape of the free surface on top of the fluid? The different fluids will lead to a different shape. For the Newtonian fluid, the meniscus descends due to the centrifugal forces. However, for the certain non-Newtonian fluid, the meniscus climbs the internal cylinder. We want to explain the above phenomenon by a rigorous mathematical analysis theory. In the present paper, as the first step, we focus on the Newtonian fluid. This is a steady free boundary problem. We aim to establish the well-posedness of this problem. Furthermore, we prove the convergence of the formal perturbation series obtained by Joseph and Fosdick in Arch. Ration. Mech. Anal. 49 (1973), 321–380.

KdV Equation Model in Open Cylindrical Channel under Precession

A new model for Korteweg and de-Vries equation (KdV) is derived. The system under study is an open channel consisting of two concentric cylinders, rotating about their vertical axis, which is tilted by slope $$\tau$$ τ from the inertial vertical $$z$$ z , in uniform rate $${\Omega }_{1}=\tau \Omega$$ Ω 1 = τ Ω , and the whole tank is elevated over other table rotating at rate $$\Omega$$ Ω . Under these conditions, a set of Kelvin waves is formed on the free surface depending on the angle of tilt, characterized by the slope $$\tau$$ τ , volume of water, and rotation rate. The resonant mode in the system appears in the form of a single Kelvin solitary wave, whose amplitude satisfies the Korteweg-de Vries equation with forced term. The equation was derived following classical perturbation methods, the additional term made the equation a non-integrable one, that cannot be solved without the help of numerical methods. Invoking the simple finite difference scheme method, it was found that the numerical results are in a good agreement with the experiment.