scholarly journals Empirical estimation of uncertainties of Charpy impact testing transition temperatures for an RPV steel

2020 ◽  
Vol 6 ◽  
pp. 57
Author(s):  
Bernard Marini
Keyword(s):  
Charpy Impact ◽  
Simple Expression ◽  
Impact Testing ◽  
Data Sets ◽  
Transition Temperatures ◽  
Empirical Estimation ◽  
Charpy Test ◽  
Rpv Steel ◽  
Charpy Impact Testing ◽  
Estimation Of Uncertainties

The aim of the present work is to derive empirically a simple expression of the uncertainties on Charpy transition temperatures (TT), which depends only on the test temperatures and the number of tests at each of these temperatures. Calculations of the TT uncertainties of a RPV steel are performed based on an empirical representation of Charpy test results and a Monte Carlo procedure to generate large numbers of data sets for different test matrices. Applying usual procedures to determine the TT to the generated data sets gives access to the distributions of these quantities from which the uncertainties are calculated.An analytical expression for these uncertainties is proposed.

Alfa fibers for Cereplast bio-composites reinforcement: Effects of chemical and biological treatments on the mechanical properties

2021 ◽  
pp. 096739112110060
Author(s):  
Mouna Werchefani ◽  
Catherine Lacoste ◽  
Hafedh Belguith ◽  
Chedly Bradai
Keyword(s):  
Charpy Impact ◽  
Impact Testing ◽  
Hot Water ◽  
Cellulose Content ◽  
Twin Screw ◽  
Electron Microscopy Analysis ◽  
Alfa Fibers ◽  
Charpy Impact Testing ◽  
Water Treatments ◽  
The Impact

The present work is a comparative study of the impact of Alfa fiber modifications on the Cereplast composites mechanical behavior. Various treatments have been employed, including mechanical, soda, saltwater-retting, hot-water treatments and enzymatic treatment using xylanase. Chemical and morphological analyses were carried out in order to determine the changes of the biochemical composition and the dimensions of fibers. Cereplast composites reinforced with Alfa fibers were fabricated using a twin-screw extrusion followed by an injection molding technique with a fiber load of 20 wt. %. Resulting materials were assessed by means of tensile, flexural and Charpy impact testing. Scanning Electron Microscopy analysis was carried out to investigate the interfacial properties of the composites. The results have shown a significant enhancement of mechanical strengths and rigidities for the xylanase-treated fiber composites, owing to the increase of cellulose content, the enhancement of defibrillation level and the improvement of matrix-fiber adhesion. The data proved that the technology of enzymes can be used as a powerful and eco-friendly approach to modify fiber surfaces and to increase their potential of reinforcement.

Charpy Impact Testing at 20°K

1965 ◽  
pp. 56-62 ◽  
Author(s):  
T. F. Kiefer ◽  
R. D. Keys ◽  
F. R. Schwartzberg
Keyword(s):  
Charpy Impact ◽  
Impact Testing ◽  
Charpy Impact Testing

scholarly journals Characterization of Maple and Ash Material Properties for the Finite Element Modeling of Wood Baseball Bats

2018 ◽  
Vol 8 (11) ◽  
pp. 2256 ◽  
Author(s):  
Joshua Fortin-Smith ◽  
James Sherwood ◽  
Patrick Drane ◽  
David Kretschmann
Keyword(s):  
Finite Element ◽  
Finite Element Modeling ◽  
Material Properties ◽  
Charpy Impact ◽  
Impact Testing ◽  
Charpy Test ◽  
Ball Impact ◽  
Element Modeling ◽  
The Impact ◽  
Baseball Bats

To assist in developing a database of wood material properties for the finite element modeling of wood baseball bats, Charpy impact testing at strain rates comparable to those that a wood bat experiences during a bat/ball collision is completed to characterize the failure energy and strain-to-failure as a function of density and slope-of-grain (SoG) for northern white ash (Fraxinus americana) and sugar maple (Acer saccharum). Un-notched Charpy test specimens made from billets of ash and maple that span the range of densities and SoGs that are approved for making professional baseball bats are impacted on either the edge grain or face grain. High-speed video is used to capture each test event and image analysis techniques are used to determine the strain-to-failure for each test. Strain-to-failure as a function of density relations are derived and these relations are used to calculate inputs to the *MAT_WOOD (Material Model 143) and *MAT_EROSION material options in LS-DYNA for the subsequent finite element modeling of the ash and maple Charpy Impact tests and for a maple bat/ball impact. The Charpy test data show that the strain-to-failure increases with increasing density for maple but the strain-to-failure remains essentially constant over the range of densities considered in this study for ash. The flat response of the ash data suggests that ash-bat durability is less sensitive to wood density than maple-bat durability. The available SoG results suggest that density has a greater effect on the impact failure properties of the wood than SoG. However, once the wood begins to fracture, SoG plays a large role in the direction of crack propagation of the wood, thereby determining if the shape of the pieces breaking away from the bat are fairly blunt or spear-like. The finite element modeling results for the Charpy and bat/ball impacts show good correlation with the experimental data.

Sign in / Sign up

Export Citation Format

Share Document