scholarly journals Dynamics of lean premixed flames stabilized on a meso-scale bluff-body in an unconfined flow field

2018 ◽  
Vol 13 (6) ◽  
pp. 48 ◽  
Author(s):  
Yu Jeong Kim ◽  
Bok Jik Lee ◽  
Hong G. Im
Keyword(s):  
Bluff Body ◽  
Proper Time ◽  
Premixed Flames ◽  
Narrow Channel ◽  
Flame Stabilization ◽  
Inflow Velocity ◽  
Lean Premixed Flames ◽  
Lean Premixed ◽  
The Mean ◽  
Meso Scale

Two-dimensional direct numerical simulations were conducted to investigate the dynamics of lean premixed flames stabilized on a meso-scale bluff-body in hydrogen-air and syngas-air mixtures. To eliminate the flow confinement effect due to the narrow channel, a larger domain size at twenty times the bluff-body dimension was used in the new simulations. Flame/flow dynamics were examined as the mean inflow velocity is incrementally raised until blow-off occurs. As the mean inflow velocity is increased, several distinct modes in the flame shape and fluctuation patterns were observed. In contrast to our previous study with a narrow channel, the onset of local extinction was observed during the asymmetric vortex shedding mode. Consequently, the flame stabilization and blow-off behavior was found to be dictated by the combined effects of the hot product gas pocket entrained into the extinction zone and the ability to auto-ignite the mixture within the given residence time corresponding to the lateral flame fluctuations. A proper time scale analysis is attempted to characterize the flame blow-off mechanism, which turns out to be consistent with the classic theory of Zukoski and Marble.

Modeling of Turbulent Combustion Process and Lean Blow Out Using Combined Approach

2008 ◽  
Author(s):  
Yu. G. Kutsenko ◽  
S. F. Onegin ◽  
L. Y. Gomzikov
Keyword(s):  
Combustion Chamber ◽  
Bluff Body ◽  
Diffusion Flames ◽  
Premixed Flames ◽  
Combustion Process ◽  
Flame Stabilization ◽  
Combustion Model ◽  
Main Zone ◽  
Lean Premixed ◽  
No Emissions

Most of the modern combustor’s designs use staged concepts for reducing thermal NO emissions. Usually, a combustion process takes place inside the main zone, which uses very lean premixed fuel/air mixtures. A diffusion pilot zone supports combustion process inside a lean main zone. Thermal NO formation process takes place predominantly inside hot diffusion flame. So, operation modes of pilot and main zones must be arranged to provide low NO emissions of pilot zone and maintain flame stability inside the main zone simultaneously. In this paper a concept of new turbulent model combustion model is presented. This model allows to model diffusion and premixed flames and takes into account various physical processes, which lead to flame destabilization. The model uses an equation for reaction progress variable. In the frameworks of considered approach this equation has three source terms. These terms are responsible for different conditions of combustion process: diffusion flames, premixed flames and distributed reaction zones. A proposed model was widely validated for different types of combustion chambers such as: 1) Bluff-body flameholder (lean premixed combustion: modeling of lean blow out); 2) Conventional diffusion regime of combustion chamber of gas turbine engine (modeling of flame stabilization and NO emissions); 3) Combined combustion regime of combustion chamber: burning process is inside pilot diffusion and main premixed zones (NO emissions and lean blow out limits for several operational modes). These tests had shown a good agreement of experimentally obtained data with results of simulations.

scholarly journals Modelling of a Bluff-Body Stabilised Premixed Flames Close to Blow-Off

Computation ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 43
Author(s):  
Shokri Amzin ◽  
Mohd Fairus Mohd Yasin
Keyword(s):  
Bluff Body ◽  
Fluid Dynamic ◽  
Premixed Flames ◽  
Pollutant Emissions ◽  
Moment Closure ◽  
Recirculation Region ◽  
Scalar Dissipation ◽  
Average Error ◽  
Conditional Moment ◽  
Lean Premixed

As emission legislation becomes more stringent, the modelling of turbulent lean premixed combustion is becoming an essential tool for designing efficient and environmentally friendly combustion systems. However, to predict emissions, reliable predictive models are required. Among the promising methods capable of predicting pollutant emissions with a long chemical time scale, such as nitrogen oxides (NOx), is conditional moment closure (CMC). However, the practical application of this method to turbulent premixed flames depends on the precision of the conditional scalar dissipation rate,. In this study, an alternative closure for this term is implemented in the RANS-CMC method. The method is validated against the velocity, temperature, and gas composition measurements of lean premixed flames close to blow-off, within the limit of computational fluid dynamic (CFD) capability. Acceptable agreement is achieved between the predicted and measured values near the burner, with an average error of 15%. The model reproduces the flame characteristics; some discrepancies are found within the recirculation region due to significant turbulence intensity.

Noise Sources of Lean Premixed Flames

2019 ◽  
Vol 103 (3) ◽  
pp. 773-796 ◽  
Author(s):  
Konrad Pausch ◽  
Sohel Herff ◽  
Feichi Zhang ◽  
Henning Bockhorn ◽  
Wolfgang Schröder
Keyword(s):  
Premixed Flames ◽  
Noise Sources ◽  
Lean Premixed Flames ◽  
Lean Premixed
Sign in / Sign up

Export Citation Format

Share Document