scholarly journals Influence of Different Drinks on the Colour Stability of Dental Resin Composites

2009 ◽  
Vol 03 (01) ◽  
pp. 50-56 ◽  
Author(s):  
Fulya Toksoy Topcu ◽  
Gunes Sahinkesen ◽  
Kivanc Yamanel ◽  
Ugur Erdemir ◽  
Elif Aybala Oktay ◽  
...  
Keyword(s):  
Red Wine ◽  
Artificial Saliva ◽  
Colour Change ◽  
Resin Composites ◽  
Colour Stability ◽  
Dental Resin ◽  
Dental Resin Composites ◽  
Colour Measurements ◽  
Restorative Materials ◽  
Colour Changes

ABSTRACTObjectives: The objective of this study was to evaluate the discolouration effects of artificial saliva, granule lemon juice, coffee (without sugar), coca cola, sour cherry juice, fresh carrot juice and red wine on resin-based composite materials that are commonly used in restorative dentistry.Methods: Colour of four brands of resin composites (Filtek Z 250 (3M Espe), Filtek Supreme (3M Espe), Quadrant (Cavex), Charisma (Heraeus-Kulzer)) of A2 shade was measured after one day of immersion in eight different solutions. Colour measurements were obtained by using a XL-20 Trismus Colourimeter and colour differences (�E) were estimated. For statistical evaluation, analysis of variance (ANOVA), Dunnett and Tukey tests were used at a significance level of 0.05.Results: For the four restorative materials tested, the lowest ΔE values were observed in the artificial saliva, while ΔE values were the highest in red wine group. When comparing the four different restorative materials, Filtek Supreme exhibited the least colour changes whereas Filtek Z250 was the least colour-stable.Conclusions: Dental resin composites and drinking solutions were significant factors that may affect the colour stability. After immersion for one day, all materials showed visible colour changes. The red wine solution exhibited more staining than others in three groups. Filtek Supreme showed significantly the least colour change due to its nano particle sizes. (Eur J Dent 2009;3:50-56)

Effect of light intensity and water aging on surface hardness of dental resin-composites

2019 ◽  
Vol 64 (11) ◽  
pp. 1007-1014
Author(s):  
Tong XU ◽  
◽  
Jia-Hui ZHANG ◽  
Zhao-Ying LIU ◽  
Xuan LI ◽  
...  
Keyword(s):  
Light Intensity ◽  
Surface Hardness ◽  
Resin Composites ◽  
Dental Resin ◽  
Dental Resin Composites ◽  
Effect Of Light

Viscosity and stickiness of dental resin composites at elevated temperatures

2021 ◽  
Vol 37 (3) ◽  
pp. 413-422
Author(s):  
Nikolaos Loumprinis ◽  
Eva Maier ◽  
Renan Belli ◽  
Anselm Petschelt ◽  
George Eliades ◽  
...  
Keyword(s):  
Elevated Temperatures ◽  
Resin Composites ◽  
Dental Resin ◽  
Dental Resin Composites

scholarly journals Effect of Accelerated Aging on Some Mechanical Properties and Wear of Different Commercial Dental Resin Composites

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2769
Author(s):  
Jonne Oja ◽  
Lippo Lassila ◽  
Pekka K. Vallittu ◽  
Sufyan Garoushi
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Accelerated Aging ◽  
Wear Depth ◽  
Resin Composites ◽  
Expiration Date ◽  
Dental Resin ◽  
Hydrothermal Aging ◽  
Dental Resin Composites

The aim of current in vitro research was to determine the effect of hydrothermal accelerated aging on the mechanical properties and wear of different commercial dental resin composites (RCs). In addition, the effect of expiration date of the composite prior its use was also evaluated. Five commercially available RCs were studied: Conventional RCs (Filtek Supreme XTE, G-aenial Posterior, Denfil, and >3y expired Supreme XTE), bulk-fill RC (Filtek Bulk Fill), and short fiber-reinforced RC (everX Posterior). Three-point flexural test was used for determination of ultimate flexural strength (n = 8). A vickers indenter was used for testing surface microhardness. A wear test was conducted with 15,000 chewing cycles using a dual-axis chewing simulator. Wear pattern was analyzed by a three-dimensional (3D) noncontact optical profilometer. Degree of C=C bond conversion of monomers was determined by FTIR-spectrometry. The specimens were either dry stored for 48 h (37 °C) or boiled (100 °C) for 16 h before testing. Scanning electron microscopy (SEM) was used to evaluate the microstructure of each material. Data were analyzed using ANOVA (p = 0.05). Hydrothermal aging had no significant effects on the surface wear and microhardness of tested RCs (p > 0.05). While flexural strength significantly decreased after aging (p < 0.05), except for G-aenial Posterior, which showed no differences. The lowest average wear depth was found for Filtek Bulk Fill (29 µm) (p < 0.05), while everX Posterior and Denfil showed the highest wear depth values (40, 39 µm) in both conditions. Passing the expiration date for 40 months did not affect the flexural strength and wear of tested RC. SEM demonstrated a significant number of small pits on Denfil’s surface after aging. It was concluded that the effect of accelerated aging may have caused certain weakening of the RC of some brands, whereas no effect was found with one brand of RC. Thus, the accelerated aging appeared to be more dependent on material and tested material property.

Evaluating antibacterial and surface mechanical properties of chitosan modified dental resin composites

2020 ◽  
Vol 28 (2) ◽  
pp. 165-173 ◽  
Author(s):  
Shahid Ali ◽  
Laila Sangi ◽  
Naresh Kumar ◽  
Bharat Kumar ◽  
Zohaib Khurshid ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Resin Composites ◽  
Dental Resin ◽  
Dental Resin Composites

Synthesis of two PET waste derived bisacrylic and bisallylic monomers and their potential use as crosslinking agents and dental resin composites

2014 ◽  
Vol 132 (8) ◽  
pp. n/a-n/a ◽  
Author(s):  
Juan Coreño Alonso ◽  
Antonio Cruz Aguilar ◽  
Carlos Enrique Cuevas-Suárez ◽  
Rosa Ángeles Vázquez García ◽  
Ana María Herrera-González
Keyword(s):  
Resin Composites ◽  
Dental Resin ◽  
Pet Waste ◽  
Dental Resin Composites ◽  
Potential Use ◽  
Crosslinking Agents

Changes in surface characteristics of dental resin composites after polishing

2005 ◽  
Vol 16 (4) ◽  
pp. 347-353 ◽  
Author(s):  
Mi-Sook Choi ◽  
Yong-Keun Lee ◽  
Bum-Soon Lim ◽  
Sang-Hoon Rhee ◽  
Hyeong-Cheol Yang
Keyword(s):  
Surface Characteristics ◽  
Resin Composites ◽  
Dental Resin ◽  
Dental Resin Composites

Ca-Doped mesoporous SiO2/dental resin composites with enhanced mechanical properties, bioactivity and antibacterial properties

2018 ◽  
Vol 6 (3) ◽  
pp. 477-486 ◽  
Author(s):  
Yu Zhang ◽  
Cui Huang ◽  
Jiang Chang
Keyword(s):  
Mechanical Properties ◽  
Antibacterial Activity ◽  
Antibacterial Properties ◽  
Resin Composites ◽  
Dental Resin ◽  
Dental Resin Composites ◽  
Mesoporous Sio2

MCS containing resin composites possess enhanced mechanical properties and antibacterial activity, and can smartly induce the deposition of apatite minerals.

Sign in / Sign up

Export Citation Format

Share Document