Interface Friction Angle Soil-on-Steel from Ring Shear Tests on Offshore North Sea Sands

Author(s):  
Vicente S. Quinteros ◽  
Rune Dyvik ◽  
Niels Mortensen
2015 ◽  
Vol 52 (7) ◽  
pp. 971-981 ◽  
Author(s):  
Aiguo Xing ◽  
Gonghui Wang ◽  
Bin Li ◽  
Yao Jiang ◽  
Zhen Feng ◽  
...  

A large catastrophic landslide was triggered by a heavy rainfall on 28 June 2010 in Guanling, Guizhou, China. The landslide buried two villages and killed 99 people along the runout path. The landslide involved the failure of about 985 000 m3 of sandstone from the source area, with a runout of about 1.4 km over a total vertical distance of about 420 m. To understand the possible long-runout mechanism and behaviour of the landslide, a detailed field survey of the landslide was conducted and samples were taken from the runout path. The shear behaviour of the sample based on a series of ring shear tests was examined, and numerical simulation of the landsliding behaviour by using a numerical runout model (DAN-W) was performed in which the shear strength obtained by ring shear tests was used. The experimental results reveal that the residual shear strength measured along the pre-existing shear surface is independent of the shear displacement rate under partially drained conditions, suggesting that the relationship between shear and normal stresses obeys the frictional model. A bulk basal friction angle of 14.4° at the base of the moving mass was then obtained from the test results. The simulated results show that the selected rheological model and parameters based on ring shear tests could provide the best performance in simulating the landslide. Therefore, it is expected that the model and parameters could improve the precision of hazard zonation for areas with geological, topographical, and climatic features similar to the Guanling landslide area.


2006 ◽  
Vol 46 (2) ◽  
pp. 147-157 ◽  
Author(s):  
Sebastian Lobo-Guerrero ◽  
Luise Vallejo

Landslides ◽  
2009 ◽  
Vol 6 (3) ◽  
pp. 231-240 ◽  
Author(s):  
Daniela Boldini ◽  
Fawu Wang ◽  
Kyoji Sassa ◽  
Paolo Tommasi

Geofluids ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Hung-Ming Lin ◽  
Jian-Hong Wu ◽  
Erik Sunarya

A new consolidated undrained ring shear test capable of measuring the pore pressures is presented to investigate the initiation mechanism of the Hsien-du-shan rock avalanche, triggered by Typhoon Morakot, in southern Taiwan. The postpeak state of the landslide surface between the Tangenshan sandstone and the remolded landslide gouge is discussed to address the unstable geomorphological precursors observed before the landslide occurred. Experimental results show that the internal friction angle of the high water content sliding surface in the total stress state, between 25.3 and 26.1°, clarifies the reason of the stable slope prior to Typhoon Morakot. In addition, during the ring shear tests, it is observed that the excess pore pressure is generated by the shear contractions of the sliding surface. The remolded landslide gouge, sheared under the high normal stress, rendered results associated with high shear strength, small shear contraction, low hydraulic conductivity, and continuous excess pore pressure. The excess pore pressure feedback at the sliding surface may have accelerated the landslide.


Sign in / Sign up

Export Citation Format

Share Document