Influence of Traffic Flow Characteristics on Traffic Wind of Highway Tunnel

CICTP 2020 ◽  
2020 ◽  
Author(s):  
Xue Li ◽  
Lipeng Cong ◽  
Xuan Zheng
2021 ◽  
Vol 9 (4) ◽  
pp. 378
Author(s):  
Jong Kwan Kim

As high vessel traffic in fairways is likely to cause frequent marine accidents, understanding vessel traffic flow characteristics is necessary to prevent marine accidents in fairways. Therefore, this study conducted semi-continuous spatial statistical analysis tests (the normal distribution test, kurtosis test and skewness test) to understand vessel traffic flow characteristics. First, a vessel traffic survey was conducted in a designated area (Busan North Port) for seven days. The data were collected using an automatic identification system and subsequently converted using semi-continuous processing methods. Thereafter, the converted data were used to conduct three methods of spatial statistical analysis. The analysis results revealed the vessel traffic distribution and its characteristics, such as the degree of use and lateral positioning on the fairway based on the size of the vessel. In addition, the generalization of the results of this study along with that of further studies will aid in deriving the traffic characteristics of vessels on the fairway. Moreover, these characteristics will reduce maritime accidents on the fairway, in addition to establishing the foundation for research on autonomous ships.


Author(s):  
Åsa Enberg ◽  
Matti Pursula

The traffic-flow characteristics on an experimental, 20-km-long three-lane highway section in Finland were studied. The sections of highway that have a separate passing lane consist of three lanes. The central lane is assigned alternately to each direction as a passing lane with a length of 1.05 to 1.70 km. The lengths of the no-overtaking zones between successive passing lanes are 1.5 to 4.0 km. The traffic-flow characteristics on the three-lane highway have been observed by comprehensive before-and-after field studies and complementary simulations. Because it was possible to use passing lanes, the number of overtakings on the three-lane highway was remarkably higher than on the former two-lane highway. The overall average travel speeds were slightly higher, and the speed decreased a little more slowly with increasing flow on the three-lane compared with the two-lane highway. Overall platooning and mean platoon lengths decreased as a result of platoon dispersal on the passing lanes. The speeds used in the passing lanes were clearly higher than in the basic lanes. According to the simulation results, the optimum length for a single passing lane was between 0.5 and 2.5 km depending on flow rate and measure of effectiveness. For the actual three-lane highway conditions, passing lanes 1.0 to 1.5 km long seemed to bring the most benefits.


Sign in / Sign up

Export Citation Format

Share Document