Identification of vacancies in the ordered intermetallic compound B2–Ru46Al54

2005 ◽  
Vol 86 (12) ◽  
pp. 121908 ◽  
Author(s):  
E. Partyka ◽  
W. Sprengel ◽  
H. Weigand ◽  
H.-E. Schaefer ◽  
F. Krogh ◽  
...  
Author(s):  
S. M. L. Sastry

Ti3Al is an ordered intermetallic compound having the DO19-type superlattice structure. The compound exhibits very limited ductility in tension below 700°C because of a pronounced planarity of slip and the absence of a sufficient number of independent slip systems. Significant differences in slip behavior in the compound as a result of differences in strain rate and mode of deformation are reported here.Figure 1 is a comparison of dislocation substructures in polycrystalline Ti3Al specimens deformed in tension, creep, and fatigue. Slip activity on both the basal and prism planes is observed for each mode of deformation. The dominant slip vector in unidirectional deformation is the a-type (b) = <1120>) (Fig. la). The dislocations are straight, occur for the most part in a screw orientation, and are arranged in planar bands. In contrast, the dislocation distribution in specimens crept at 700°C (Fig. lb) is characterized by a much reduced planarity of slip, a tangled dislocation arrangement instead of planar bands, and an increased incidence of nonbasal slip vectors.


2002 ◽  
Vol 47 (9) ◽  
pp. 625-629 ◽  
Author(s):  
C.B. Jiang ◽  
H. Li ◽  
C.X. Huang ◽  
G.Y. Li ◽  
S.D. Wu ◽  
...  

2008 ◽  
Vol 458 (1-2) ◽  
pp. 277-281 ◽  
Author(s):  
Yongzhang Huang ◽  
Wenxia Yuan ◽  
Zhiyu Qiao ◽  
Olga Semenova ◽  
Gabriel Bester ◽  
...  

1993 ◽  
Vol 170 (1-2) ◽  
pp. 11-18 ◽  
Author(s):  
J.M. Brzeski ◽  
J.E. Hack ◽  
R. Darolia ◽  
R.D. Field

1990 ◽  
Vol 201 ◽  
Author(s):  
Michael J. Sabochick ◽  
Nghi Q. Lam

AbstractAmorphization of the B2 intermetallic compound NiTi under electron irradiation has been investigated using molecular dynamics. The effect of irradiation was simulated using two processes: 1) Ni and Ti atoms were exchanged, resulting in chemical disorder, and 2) Frenkel pairs were introduced, leading to the formation of stable point defects and also chemical disorder upon mutual recombination of interstitials and vacancies. After ∼0.1 exchanges per atom, the first process resulted in an energy increase of approximately 0.11 eV/atom and a volume increase of 1.91%. On the other hand, after introducing ∼0.5 Frenkel pairs per atom, the second process led to smaller increases of 0.092 eV/atom in energy and 1.43% in volume. The calculated radial distribution functions (RDFs) were essentially identical to each other and to the calculated RDF of a quenched liquid. The structure factor, however, showed that long-range order was still present after atom exchanges, while the introduction of Frenkel pairs resulted in the loss of long-range order. It was concluded that point defects are necessary for amorphization to occur in NiTi, although chemical disorder alone is capable of storing enough energy to make the transition possible.


1995 ◽  
Vol 3 (1) ◽  
pp. 47-56 ◽  
Author(s):  
M.-X. Zhang ◽  
K.-C. Hsieh ◽  
Y.A. Chang ◽  
J.P. Neumann ◽  
A.D. Romig

1990 ◽  
Vol 186 ◽  
Author(s):  
Y. Austin Chang ◽  
Joachim P. Neumann ◽  
Shuang-Tin Chen

AbstractThe Wagner-Schottky model was used to describe the thermodynamic behavior of ordered intermetallic compound phases. To demonstrate the utility of the approach, the models developed for triple-defect B2 (and B32) and anti-structure L10 phases were used to describe the thermodynamic properties of β-AlLi and γ-TiAl respectively. Since any potential engineering materials to be developed on the basis of intermetallics will be multi-component systems, the methodology was extended to describe the thermodynamic properties of ternary intermetallics. The ternary Ti-Mo-Al system was used as an example for discussion. It is believed that the general topologies concerning the phase equilibria of Ti-M-AI with M being V, Nb, Ta, Mo and W are similar. The relative stabilities of the competing phases, i.e. BCC and HCP, in the mid-composition region of Ti-M-AI were discussed.


Sign in / Sign up

Export Citation Format

Share Document