Attenuated-total-reflection predictions to surface-plasmon resonance in a layered structure

2005 ◽  
Vol 98 (5) ◽  
pp. 053708 ◽  
Author(s):  
D. B. Singh ◽  
V. K. Tripathi
2020 ◽  
Vol 23 (1) ◽  
pp. 27
Author(s):  
Rina Dewi Mayasari ◽  
Ajeng Novita Sari ◽  
Aditya Eka Mulyono ◽  
Agus Setyo Budi ◽  
Ratno Nuryadi

Pengamatan fenomena surface plasmon resonance (SPR) telah berhasil dilakukan pada ZnO nanorods yang ditumbuhkan di atas lapisan tipis emas. Sistem SPR menggunakan konfigurasi Kretschmann termodifikasi dimana permukaan prisma dideposisi dengan lapisan tipis emas dan ZnO nanorods (prisma/Au/ZnO). Penumbuhan ZnO nanorods menggunakan metode hidrotermal dengan dua tahapan, yaitu pelapisan ZnO seed dan penumbuhan rods. Waktu penumbuhan divariasikan selama 5 menit, 2 jam, dan 4 jam, pada suhu 95 °C yang diikuti dengan annealing pada suhu 500 °C selama 1 jam. Struktur ZnO dikarakterisasi dengan X-ray diffraction (XRD), field emission scanning electron microscope - energy dispersive X-ray spectroscopy (FESEM-EDS), serta diamati fenomena SPR melalui grafik attenuated total reflection (ATR). Hasil karakterisasi menunjukkan bahwa ZnO nanorods (2 jam dan 4 jam) memiliki struktur kristal heksagonal dengan distribusi ukuran diameter pada rentang 20 nm – 60 nm. Fenomena SPR hanya teramati pada nanopartikel ZnO (5 menit) pada sudut SPR (θSPR) 58,2°. Fenomena SPR tidak terlihat pada ZnO nanorods (2 jam dan 4 jam) dikarenakan panjang rods melebihi 100 nm.


2019 ◽  
Vol 8 (2) ◽  
pp. 51-58 ◽  
Author(s):  
Md. Biplob Hossain ◽  
M. M. Rahman Khan ◽  
Md. Sadiqur Rahman ◽  
S. S. Bin Badrudduza ◽  
M. M. Sabiha ◽  
...  

In this article, numerically a surface plasmon resonance (SPR) biosensor is developed based on Graphene-M­­­­OS2-Au-TiO2-SiO2 hybrid structure for formalin detection. This developed sensor sensed the presence of formalin by applying attenuated total reflection (ATR). In ATR method, we developed and observed two characteristics curve, one is “SPR angle versus minimum reflectance (Rmin)” and another is “SPR frequency (SPRF) versus maximum transmittance (Tmax). In the proposed sensor, Chitosan is used as probe legend to perform specific reaction with the formalin (40% formaldehyde) as target legend. Here, graphene and MoS2 both are used as biomolecular acknowledgment element (BAE). And TiO2 as well as SiO2 bilayers are used to improve sensor sensitivity and Gold (Au) is to sharp SPR curve. In numerical results, the variation of SPRF and SPR angle for inappropriate sensing of formalin is quiet insignificant which confirms the absence of formalin. On the other hand, these variations for appropriate sensing is considerably significant that confirms the presence of formalin. At the end of this article, a study of variation of sensitivity of the proposed biosensor in corresponding to the increment of refractive index with a refractive index step 0.01 RIU is measured. In inclusion of TiO2-SiO2 bilayers with Graphene-M­­­­OS2, maximum sensitivity of 85.375% more is numerically reported.


Sign in / Sign up

Export Citation Format

Share Document