Addition of regiorandom poly(3-hexylthiophene) to solution processed poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester graded bilayers to tune the vertical concentration gradient

2012 ◽  
Vol 101 (17) ◽  
pp. 173301 ◽  
Author(s):  
Varun Vohra ◽  
Koichi Higashimine ◽  
Tatsuya Murakami ◽  
Hideyuki Murata
Keyword(s):  
Methyl Ester ◽  
Butyric Acid ◽  
Concentration Gradient ◽  
Acid Methyl Ester ◽  
Solution Processed ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester

A mono(carboxy)porphyrin-triazine-(bodipy)2triad as a donor for bulk heterojunction organic solar cells

2015 ◽  
Vol 3 (24) ◽  
pp. 6209-6217 ◽  
Author(s):  
Ganesh D. Sharma ◽  
S. A. Siddiqui ◽  
Agapi Nikiforou ◽  
Galateia E. Zervaki ◽  
Irene Georgakaki ◽  
...  
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Organic Solar Cells ◽  
Bulk Heterojunction ◽  
Acid Methyl Ester ◽  
Solution Processed ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester

A mono(carboxy)porphyrin-triazine-(bodipy)2triad(PorCOOH)(BDP)2has been used as a donor with ([6,6]-phenyl C71butyric acid methyl ester) (PC71BM) as an acceptor, in BHJ - solution processed organic solar cells.

Solution-Processed Donor–Acceptor Poly(3-hexylthiophene):Phenyl-C61-butyric Acid Methyl Ester Diodes for Low-Voltage α Particle Detection

2021 ◽  
Vol 13 (5) ◽  
pp. 6470-6479
Author(s):  
Fani Eirini Taifakou ◽  
Muhammad Ali ◽  
Joanna Borowiec ◽  
Xiaoqi Liu ◽  
Peter A. Finn ◽  
...  
Keyword(s):  
Methyl Ester ◽  
Butyric Acid ◽  
Low Voltage ◽  
Acid Methyl Ester ◽  
Particle Detection ◽  
Solution Processed ◽  
Acid Methyl ◽  
Donor Acceptor ◽  
Butyric Acid Methyl Ester

Blend composition study of poly(3,3‴-didodecylquaterthiophene)/[6,6]-phenyl C61 butyric acid methyl ester solution processed organic solar cells

2009 ◽  
Vol 105 (1) ◽  
pp. 016105 ◽  
Author(s):  
Avery P. Yuen ◽  
John S. Preston ◽  
Ah-Mee Hor ◽  
Richard Klenkler ◽  
Erees Queen B. Macabebe ◽  
...  
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Organic Solar Cells ◽  
Acid Methyl Ester ◽  
Solution Processed ◽  
Blend Composition ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester ◽  
Composition Study

Solution-processed black phosphorus/PCBM hybrid heterojunctions for solar cells

2017 ◽  
Vol 5 (18) ◽  
pp. 8280-8286 ◽  
Author(s):  
Linyi Bai ◽  
Liqun Sun ◽  
Yang Wang ◽  
Zhizhou Liu ◽  
Qiang Gao ◽  
...  
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Acid Methyl Ester ◽  
Black Phosphorus ◽  
Solution Processed ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester ◽  
First Time ◽  
Two Hybrid

Two hybrid heterojunctions consisting of black phosphorus and phenyl-C61-butyric acid methyl ester were developed for the first time and showed high performances in solar cells.

Optical Absorption Enhancement in Polymer BHJ thin Film Using Ag Nanostructures: A Simulation Study

2020 ◽  
Vol 16 (4) ◽  
pp. 556-567
Author(s):  
Asma Khalil ◽  
Zubair Ahmad ◽  
Farid Touati ◽  
Mohamed Masmoudi
Keyword(s):  
Absorption Spectrum ◽  
Solar Cell ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Organic Solar Cell ◽  
Short Circuit ◽  
Acid Methyl Ester ◽  
Short Circuit Current ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester

Background: The photo-absorption and light trapping through the different layers of the organic solar cell structures are a growing concern now-a-days as it affects dramatically the overall efficiency of the cells. In fact, selecting the right material combination is a key factor in increasing the efficiency in the layers. In addition to good absorption properties, insertion of nanostructures has been proved in recent researches to affect significantly the light trapping inside the organic solar cell. All these factors are determined to expand the absorption spectrum and tailor it to a wider spectrum. Objective: The purpose of this investigation is to explore the consequence of the incorporation of the Ag nanostructures, with different sizes and structures, on the photo absorption of the organic BHJ thin films. Methods: Through a three-dimensional Maxwell solver software, Lumerical FDTD, a simulation and comparison of the optical absorption of the three famous organic materials blends poly(3- hexylthiophene): phenyl C71 butyric acid methyl ester (P3HT:PCBM), poly[N-9″-heptadecanyl-2,7- carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole)]: phenyl C71 butyric acid methyl ester (PCDTBT:PCBM) and poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b′]dithiophene)-alt- 4,7-(2,1,3-benzothiadiazole)]: phenyl C71 butyric acid methyl ester (PCDPDTBT:PCBM) has been conducted. Furthermore, FDTD simulation study of the incorporation of nanoparticles structures with different sizes, in different locations and concentrations through a bulk heterojunction organic solar cell structure has also been performed. Results: It has been demonstrated that embedding nanostructures in different locations of the cell, specifically in the active layer and the hole transporting layer had a considerable effect of widening the absorption spectrum and increasing the short circuit current. The effect of incorporation the nanostructures in the active layer has been proved to be greater than in the HTL. Furthermore, the comparison results showed that, PCDTBT:PCBM is no more advantageous over P3HT:PCBM and PCPDTBT:PCBM, and P3HT:PCBM took the lead and showed better performance in terms of absorption spectrum and short circuit current value. Conclusion: This work revealed the significant effect of size, location and concentration of the Ag nanostructures while incorporated in the organic solar cell. In fact, embedding nanostructures in the solar cell widen the absorption spectrum and increases the short circuit current, this result has been proven to be significant only when the nanostructures are inserted in the active layer following specific dimensions and structures.

Sterically controlled azomethine ylide cycloaddition polymerization of phenyl-C61-butyric acid methyl ester

2016 ◽  
Vol 52 (36) ◽  
pp. 6107-6110 ◽  
Author(s):  
Meera Stephen ◽  
Hasina H. Ramanitra ◽  
Hugo Santos Silva ◽  
Simon Dowland ◽  
Didier Bégué ◽  
...  
Keyword(s):  
Thin Films ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Acid Methyl Ester ◽  
Azomethine Ylide ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester ◽  
Solution Processable

PCBM is polymerised using the SACAP route to give solution processable thin films and raised LUMOs.

Morphological and spectroscopic characterizations of inkjet-printed poly(3-hexylthiophene-2,5-diyl): Phenyl-C61-butyric acid methyl ester blends for organic solar cell applications

2014 ◽  
Vol 560 ◽  
pp. 14-19 ◽  
Author(s):  
A. Bruno ◽  
F. Villani ◽  
I.A. Grimaldi ◽  
F. Loffredo ◽  
P. Morvillo ◽  
...  
Keyword(s):  
Solar Cell ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Organic Solar Cell ◽  
Acid Methyl Ester ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester

Sulfonated Thiophene Derivative Stabilized Aqueous Poly(3-hexylthiophene):Phenyl-C61-butyric Acid Methyl Ester Nanoparticle Dispersion for Organic Solar Cell Applications

2018 ◽  
Vol 10 (50) ◽  
pp. 44116-44125 ◽  
Author(s):  
Surya Subianto ◽  
Rajkamal Balu ◽  
Liliana de Campo ◽  
Anna Sokolova ◽  
Naba K. Dutta ◽  
...  
Keyword(s):  
Solar Cell ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Organic Solar Cell ◽  
Acid Methyl Ester ◽  
Nanoparticle Dispersion ◽  
Thiophene Derivative ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester
Sign in / Sign up

Export Citation Format

Share Document