With the ongoing development of product process, there is a growing demand on micro products. Though the macro-drawing process has been well-developed, the design concepts may not be directly applicable to the micro-drawing due to the size effect occurred in the micro-forming processes. In the present study, experiments were conducted first to establish the stress-strain curves, r-values and work hardening exponents of 304 stainless steel sheets with different grain sizes. The experiment results reveal that the stress-strain and r-value become smaller and the work hardening exponent increases for larger grain sizes. The difference between stress-strain curves in various directions of 0°, 45° and 90°, respectively, is significant when the grain size increases. The stamping of a vibration motor shell of cell phone, which bears a circular cylindrical shape, was also examined in the present study. The finite element simulations were performed to evaluate the formability of the multi-stage drawing process with initial die design. The forming characteristics were identified and an optimum die design was then developed with the use of the finite element analysis. The stamping process with multi-stage tooling design based on the finite element analysis was implemented and the actual stamping experiments were conducted to verify finite element analysis. The experimental results confirm the validity of the modified tooling design and the efficiency of the finite element analysis.
Finite Element Analysis of Copper Deformed By Conventional Forward Extrusion