Modern Techniques in Water and Wastewater Treatment

Author(s):  
LO Kolarik ◽  
AJ Priestley

This book is the outcome of the CSIRO/UNIDO workshop in wastewater treatment. The papers presented at the workshop and published in this book provide an insight into the characteristics and applicability of the various methods used to treat water and wastewater as well as examples of both the theory and practice of these technologies. The authors include research scientists, technical consultants and industry practitioners who provide a wide range of views.

Author(s):  
Sushmita Banerjee ◽  
Ravindra Kumar Gautam ◽  
Pavan Kumar Gautam ◽  
Amita Jaiswal ◽  
Mahesh Chandra Chattopadhyaya

Fast growing demand of fresh water due to increasing population and industrialization dictated research interests towards development of techniques that offers highly efficient and affordable methods of wastewater treatment. In recent decades water treatment using nano-technological based expertise have gained significant attention. Varieties of nanoparticles were synthesized and proficiently used in treatment of wide range of organic and inorganic contaminants from waste streams. This chapter encompasses recent development in nano-technological approach towards water and wastewater treatment. The authors tried to compile up to-date development, properties, application, and mechanisms of the nanoparticles used for decontamination purpose. This piece of work offer a well organized comprehensive assessment of the technology that delineates opportunities as well as its limitation in water management practices moreover few recommendations for future research are also proposed.


2017 ◽  
pp. 1745-1779
Author(s):  
Sushmita Banerjee ◽  
Ravindra Kumar Gautam ◽  
Pavan Kumar Gautam ◽  
Amita Jaiswal ◽  
Mahesh Chandra Chattopadhyaya

Fast growing demand of fresh water due to increasing population and industrialization dictated research interests towards development of techniques that offers highly efficient and affordable methods of wastewater treatment. In recent decades water treatment using nano-technological based expertise have gained significant attention. Varieties of nanoparticles were synthesized and proficiently used in treatment of wide range of organic and inorganic contaminants from waste streams. This chapter encompasses recent development in nano-technological approach towards water and wastewater treatment. The authors tried to compile up to-date development, properties, application, and mechanisms of the nanoparticles used for decontamination purpose. This piece of work offer a well organized comprehensive assessment of the technology that delineates opportunities as well as its limitation in water management practices moreover few recommendations for future research are also proposed.


2019 ◽  
Vol 96 (6) ◽  
pp. 531-535
Author(s):  
Z. I. Zholdakova ◽  
E. A. Tulskaya ◽  
S. V. Kostuchenko ◽  
Andrey A. Tkachev

Ultraviolet disinfection is the most efficient mode in combination with other disinfection methods within multi-barrier approach for the water treatment. UV disinfection being effective against a wide range of pathogens including the chlorine-resistant (viruses and protozoa) significantly reduces chlorine byproducts. This paper presents a review of results of the implementation of multi-barrier lay-out with the application of UV disinfection at water and wastewater treatment plants of large cities: St. Petersburg and Nizhniy Novgorod.


2013 ◽  
Vol 9 (3) ◽  
pp. 1988-1999
Author(s):  
Ukiwe L.N ◽  
Ibeneme S.I ◽  
Duru C.E ◽  
Okolue B.N ◽  
Onyedika G.O ◽  
...  

Chemical and electrocoagulation are widely used coagulation methods employed in water and wastewater treatment. Both coagulation processes are effective in removing a wide range of impurities which include dissolved organic matter in form of chemical and biological oxygen demand, pathogens, oils, and colloidal particles as well as heavy metals. The present review has revealed that the mode of action of both coagulation methods is based on charge neutralization and floc formation. The effectiveness of both coagulation techniques depend on factors such as pH, coagulation dose, coagulant type, current density, applied voltage, water and wastewater  type, type of electrode, as well as size and number of electrodes. The commonly used chemical coagulants are inorganic coagulants based on aluminum and iron salts. However, there have been considerable successes in the development of pre-hydrolyzed inorganic coagulants which have the added advantage over traditional inorganic coagulants in that they function well over a wide range of pH and water temperatures. Electrocoagulation has been proposed as an alternative method to chemical coagulation because it is environmental friendly and cheap to operate. Nonetheless, most researchers are of the opinion that there are still some uncertainties regarding the understanding of its optimal performance and design mechanism.


2015 ◽  
Vol 4 (0) ◽  
pp. 9781780402840-9781780402840
Author(s):  
H. Hahn ◽  
E. Hoffman ◽  
H. Odegaard

Sign in / Sign up

Export Citation Format

Share Document