DISCOVERY AND DEVELOPMENT OF THE KOGAN NORTH AND TIPTON WEST COAL SEAM GAS (CSG) FIELDS, SURAT BASIN, SOUTHEAST QUEENSLAND

2006 ◽  
Vol 46 (1) ◽  
pp. 367 ◽  
Author(s):  
R.W. Day ◽  
R.F. Prefontaine ◽  
P.A.J. Bubendorfer ◽  
M.H. Oberhardt ◽  
B.J. Pinder ◽  
...  

In 2001, Arrow Energy NL, a fledgling coal seam gas (CSG) explorer, drilled the first wells of a multi-well exploration program in two Authorities To Prospect (ATP) permits—ATPs 683P and 676P—that covered an area totalling 13,817 km2 of the Jurassic Walloon Coal Measures in the eastern Surat Basin. The objective was to discover significant CSG resources and, if successful, to commercialise to reserve status. Early exploration success in 2002 saw the discovery of the Kogan North and Tipton West CSG fields. This paper reviews the discovery and subsequent appraisal and development work that Arrow Energy has completed to establish production from these fields.By 2004, Arrow Energy had independently certified Probablereserves in the Kogan North field of 85 PJ, and Possible reserves of 157 PJ. Results from a five-well CSG pilot operation demonstrated the feasibility of commercial gas flow rates sufficiently to justify commercialising CSG from the Walloon Coal Measures in the Kogan North field. Under the terms of a staged development agreement, CS Energy Ltd—Queensland’s largest electricity generator—farmed into the Kogan North Project to earn a 50% interest in PL194 and an adjoining portion of ATP 676P by funding A$13.1 million of the project’s development and appraisalcosts. The funds provided by CS Energy covered the majority of the development costs required for Arrow’s Kogan North development project. The initial gas sales contract from Kogan North will supply sales gas of 4 PJ/a for 15 years to CS Energy from March 2006. Arrow Energy retains the remaining 50% interest and operates the project.With 25 PJ Probable, 90 PJ Probable and 1,980 PJ Possiblegas reserves certified independently, the Tipton West field could potentially be one of the largest onshore gas fields in eastern Australia. Final appraisal of the Tipton West field is currently underway with financial close on the development expected in late 2005. Beach Petroleum Ltd has entered into an agreement to fund the A$35 million required for upstream developmentto supply the initial 10 PJ/a sales gas from the field in 2007, in exchange for 40% interest in th Dalby block of ATP683P. Arrow Energy retains the remaining 60% interest and operates the project.Diligent environmental and land management systems are required with the development of any CSG field. For example, formation water produced from CSG activities needs to be managed effectively. To deal with this water Arrow Energy is developing and implementing several innovative strategies, including forced evaporation dams, water supply to local coal-washing plants and trialling desalination plants to provide drinking water for nearby towns, aquaculture and stock watering.Arrow Energy has also implemented a Cultural Heritage Management Plan within the development areas in cooperation with the local indigenous claimant groups, the Western Wakka Wakka and the Barunggam peoples. The plan was designed to minimise risk of any disturbance to indigenous artefacts and areas of significance during the exploration, construction and ongoing operations associated with the development of both gas fields.The discovery and future development of the Kogan North and Tipton West fields has been achieved by using an appropriate mix of geological evaluation, efficient drilling techniques, innovative well completion methods and successful marketing strategies, integrated with cooperative environmental and cultural heritage management systems.

2021 ◽  
Author(s):  
Vibhas J. Pandey ◽  
Sameer Ganpule ◽  
Steven Dewar

Abstract The Walloons coal measures located in Surat Basin (eastern Australia) is a well-known coal seam gas play that has been under production for several years. The well completion in this play is primarily driven by coal permeability which varies from 1 Darcy or more in regions with significant natural fractures to less than 1md in areas with underdeveloped cleat networks. For an economic development of the latter, fracturing treatment designs that effectively stimulate numerous and often thin coals seams, and enhance inter-seam connectivity, are a clear choice. Fracture stimulation of Surat basin coals however has its own challenges given their unique geologic and geomechanical features that include (a) low net to gross ratio of ~0.1 in nearly 300 m (984.3 ft) of gross interval, (b) on average 60 seams per well ranging from 0.4 m to 3 m in thickness, (c) non-gas bearing and reactive interburden, and (d) stress regimes that vary as a function of depth. To address these challenges, low rate, low viscosity, and high proppant concentration coiled tubing (CT) conveyed pinpoint stimulation methods were introduced basin-wide after successful technology pilots in 2015 (Pandey and Flottmann 2015). This novel stimulation technique led to noticeable improvements in the well performance, but also highlighted the areas that could be improved – especially stage spacing and standoff, perforation strategy, and number of stages, all aimed at maximizing coal coverage during well stimulation. This paper summarizes the findings from a 6-well multi-stage stimulation pilot aimed at studying fracture geometries to improve standoff efficiency and maximizing coal connectivity amongst various coal seams of Walloons coal package. In the design matrix that targeted shallow (300 to 600 m) gas-bearing coal seams, the stimulation treatments varied in volume, injection rate, proppant concentration, fluid type, perforation spacing, and standoff between adjacent stages. Treatment designs were simulated using a field-data calibrated, log-based stress model. After necessary adjustments in the field, the treatments were pumped down the CT at injection rates ranging from 12 to 16 bbl/min (0.032 to 0.042 m3/s). Post-stimulation modeling and history-matching using numerical simulators showed the dependence of fracture growth not only on pumping parameters, but also on depth. Shallower stages showed a strong propensity of limited growth which was corroborated by additional field measurements and previous work in the field (Kirk-Burnnand et al. 2015). These and other such observations led to revision of early guidelines on standoff and was considered a major step that now enabled a cost-effective inclusion of additional coal seams in the stimulation program. The learnings from the pilot study were implemented on development wells and can potentially also serve as a template for similar pinpoint completions worldwide.


2012 ◽  
Vol 37 (4) ◽  
pp. 172-176
Author(s):  
Lina Kuklienė ◽  
Dainora Jankauskienė ◽  
Indrius Kuklys

The purpose of the thesis is to analyze the main geodetic databases of Lithuania and to create a geodetic database of cultural heritage objects in Klaipėda using program ArcGIS 9.3. The problem is that the geodetic database storing graphical and attributive information about cultural heritage in Klaipeda city has not been created yet. Thus, in order to incorporate GIS technologies into the management of cultural heritage, starting the creation of such a database seems to be a relevant point. The fully completed and regularly updated geodetic database can be used for cultural heritage management, planning, design, road construction, etc. Therefore, the following objectives have been set: 1) describing geo-data collection and input devices; 2) stimulating the geodetic database that introduces information about buildings, building complexes, cemeteries, locations of archaeological and cultural heritage; 3) giving a detailed description of the database creation process; 4) analyzing the need for establishing a geodetic database of cultural heritage objects in Klaipėda. Santrauka Lietuvoje GIS pagrindu sukurta daug įvairiems tikslams skirtų georeferencinių bei teminių erdvinių duomenų rinkinių. Viena iš šių rinkinių panaudojimo sričių – valstybės registruose esančių duomenų kaupimas. Tokiu principu yra sukurta Kultūros vertybių registro duomenų bazė, kurios pagrindiniai duomenys buvo panaudoti kuriant Klaipėdos miesto kultūros paveldo objektų erdvinių duomenų rinkinį. Siekiant kuo operatyviau įtraukti GIS technologijas į kultūros paveldo objektų tvarkybą, aktualu Klaipėdoje pradėti kurti kultūros paveldo objektų erdvinių duomenų rinkinį. Nuolat atnaujinamas erdvinių duomenų rinkinys palengvins įvairių sričių specialistų atliekamus kultūros paveldo objektų administravimo, teritorijų planavimo, projektavimo, kelių tiesimo ir kitus darbus. Резюме В Литве на основе ГИС для различных целей создано множество гео-ссылок, а также тематических наборов пространственных данных. Область использования одного из множеств – сбор данных, имеющихся в государственном учете. По такому принципу создана регистрационная база культурных ценностей, основные данные которой были использованы при создании набора пространственных данных объектов культурного наследия города Клайпеды. С целью оперативно обеспечить управление объектами культурного наследия технологиями ГИС следует начать создание набора пространственных данных объектов культурного наследия в Клайпеде. Полностью заполненный и постоянно обновляемый набор пространственных данных облегчит работу специалистов в различных областях: администрировании объектов культурного наследия, планировании территорий, проектировании, строительстве дорог и других.


Sign in / Sign up

Export Citation Format

Share Document