scholarly journals Production of ammonia makes Venusian clouds habitable and explains observed cloud-level chemical anomalies

2021 ◽  
Vol 118 (52) ◽  
pp. e2110889118
Author(s):  
William Bains ◽  
Janusz J. Petkowski ◽  
Paul B. Rimmer ◽  
Sara Seager

The atmosphere of Venus remains mysterious, with many outstanding chemical connundra. These include the unexpected presence of ∼10 ppm O2 in the cloud layers, an unknown composition of large particles in the lower cloud layers, and hard to explain measured vertical abundance profiles of SO2 and H2O. We propose a hypothesis for the chemistry in the clouds that largely addresses all of the above anomalies. We include ammonia (NH3), a key component that has been tentatively detected both by the Venera 8 and Pioneer Venus probes. NH3 dissolves in some of the sulfuric acid cloud droplets, effectively neutralizing the acid and trapping dissolved SO2 as ammonium sulfite salts. This trapping of SO2 in the clouds, together with the release of SO2 below the clouds as the droplets settle out to higher temperatures, explains the vertical SO2 abundance anomaly. A consequence of the presence of NH3 is that some Venus cloud droplets must be semisolid ammonium salt slurries, with a pH of ∼1, which matches Earth acidophile environments, rather than concentrated sulfuric acid. The source of NH3 is unknown but could involve biological production; if so, then the most energy-efficient NH3-producing reaction also creates O2, explaining the detection of O2 in the cloud layers. Our model therefore predicts that the clouds are more habitable than previously thought, and may be inhabited. Unlike prior atmospheric models, ours does not require forced chemical constraints to match the data. Our hypothesis, guided by existing observations, can be tested by new Venus in situ measurements.

1999 ◽  
Vol 365 (4) ◽  
pp. 310-313
Author(s):  
B. Hammouti ◽  
H. Oudda ◽  
A. El Maslout ◽  
A. Benayada

2018 ◽  
Author(s):  
Harold Jeffrey M. Consigo ◽  
Ricardo S. Calanog ◽  
Melissa O. Caseria

Abstract Gallium Arsenide (GaAs) integrated circuits have become popular these days with superior speed/power products that permit the development of systems that otherwise would have made it impossible or impractical to construct using silicon semiconductors. However, failure analysis remains to be very challenging as GaAs material is easily dissolved when it is reacted with fuming nitric acid used during standard decapsulation process. By utilizing enhanced chemical decapsulation technique with mixture of fuming nitric acid and concentrated sulfuric acid at a low temperature backed with statistical analysis, successful plastic package decapsulation happens to be reproducible mainly for die level failure analysis purposes. The paper aims to develop a chemical decapsulation process with optimum parameters needed to successfully decapsulate plastic molded GaAs integrated circuits for die level failure analysis.


2020 ◽  
Vol 3 (441) ◽  
pp. 104-109
Author(s):  
N.A. Bektenov ◽  
◽  
N.C. Murzakassymova ◽  
M.A. Gavrilenko ◽  
А.N. Nurlybayeva ◽  
...  

1985 ◽  
Vol 50 (8) ◽  
pp. 1714-1726 ◽  
Author(s):  
Václav Dědek ◽  
Igor Linhart ◽  
Milan Kováč

Sodium alkoxide-catalyzed addition of methanol, ethanol and propanol to 3-chlorononafluoro-1,5-hexadiene (I) proceeds at temperatures -35 °C to 8 °C with allyl rearrangement, affording 1,6-dialkoxy-1,1,2,3,4,4,5,6,6-octafluoro-2,4-hexadiene (V) as the principal product, along with 1,6-dialkoxy-1,2,3,3,4,5,6,6-octafluoro-1,5-diene (VI) and trans-1,6-dialkoxy-1,1,2,3,4,4,5,6,6-nonafluoro-2-hexene (VII). The ethers Va-Vc consist of the cis,trans- and trans,trans-isomers in about 3 : 1 ratio, whereas the ethers VIa-VIc have trans,trans-configuration. Ethers Vc and VIc react with concentrated sulfuric acid to give dipropyl 2,3,4,5-tetrafluoro-2,4-hexadienedioate (IX) and dipropyl 2,3,4,4,5-pentafluoro-2-hexenedioate (X), respectively, whereas the ether VIIc affords a mixture of propyl 6-propyloxy-2,3,4,4,5,6-heptafluoro-2-hexenoate (XI) and ester X. Addition of methanol to perfluoro-1,3,5-hexatriene (II) affords 1,1,2,3,4,5,6,6-octafluoro-1,6-dimethoxy-3-hexene (XIII) as the principal product.


Molbank ◽  
10.3390/m1190 ◽  
2021 ◽  
Vol 2021 (1) ◽  
pp. M1190
Author(s):  
Andreas S. Kalogirou ◽  
Panayiotis A. Koutentis

Reaction of 4,5,6-trichloropyrimidine-2-carbonitrile (1) with concentrated sulfuric acid at ca. 20 °C gave 4,5,6-trichloropyrimidine-2-carboxamide (5) in 91% yield. The new compound was fully characterized by IR, MALDI-TOF, NMR and elemental analysis.


1995 ◽  
Vol 5 (2) ◽  
pp. 65-66 ◽  
Author(s):  
Mikhail V. Gorelik ◽  
Vera I. Lomzakova ◽  
Elena A. Khamidova ◽  
Vitalii Ya. Shteiman ◽  
Marianna G. Kuznetsova ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document