The phases of tetragonal tungsten bronze in the ternary oxide system Ba2Li2Nb10O30 — Pb2Li2Nb10O30-Sr2Li2Nb10O30

2000 ◽  
Vol 247 (1) ◽  
pp. 67-73
Author(s):  
Olga A. Bunina ◽  
Igor A. Gurnikovski ◽  
Ludmila M. Rudkovskaya
1993 ◽  
Vol 8 (7) ◽  
pp. 1697-1702 ◽  
Author(s):  
Lawrence D. David ◽  
Ronald M. Anderson ◽  
Joseph M. Dynys ◽  
Charles C. Goldsmith ◽  
Andrew Szule

Syntheses of ultrafine glass powders in the MgO–Al2O3–SiO2 ternary oxide system were effected by drying and calcining sols derived from acetylacetonate-tetraethoxysilane ethanol solutions. A mixture of magnesium and aluminum acetylacetonates, dissolved with Si(OC2H5)4 in an ethanol solution in a 2:4:5 Mg: Al: Si mole ratio, was hydrolyzed, spray-dried, and calcined to yield a glass powder of 70 Å primary particle size, which sintered to densities ≥ 2.5 g/cm3 and which formed μ-cordierite as the only crystalline phase below 1000 °C. Incorporation of dopant quantities of boron and phosphorus, via their alkyl esters in the hydrolysis reaction with Si(OC2H5)4 and the acetylacetonates, afforded powders which crystallized in the α-phase directly after sintering to density = 2.66 g/cm3.


2015 ◽  
Vol 118 (10) ◽  
pp. 105702 ◽  
Author(s):  
Patrick J. M. Isherwood ◽  
Keith T. Butler ◽  
Aron Walsh ◽  
John M. Walls

1989 ◽  
Vol 156 (1-2) ◽  
pp. 291-297 ◽  
Author(s):  
Kenneth R. Poeppelmeier ◽  
Stephen H. Thong

2007 ◽  
Vol 17 (10) ◽  
pp. 1671-1681 ◽  
Author(s):  
L. Armelao ◽  
H. Bertagnolli ◽  
D. Bleiner ◽  
M. Groenewolt ◽  
S. Gross ◽  
...  

1999 ◽  
Vol 606 ◽  
Author(s):  
Keishi Nishio ◽  
Jirawat Thongrueng ◽  
Yuichi Watanabe ◽  
Toshio Tsuchiya

AbstructWe succeeded in the preparation of strontium-barium niobate (Sr0.3Ba0.7Nb2O6 : SBN30)that have a tetragonal tungsten bronze type structure thin films on SrTiO3 (100), STO, or La doped SrTiO3 (100), LSTO, single crystal substrates by a spin coating process. LSTO substrate can be used for electrode. A homogeneous coating solution was prepared with Sr and Ba acetates and Nb(OEt)5 as raw materials, and acetic acid and diethylene glycol monomethyl ether as solvents. The coating thin films were sintered at temperature from 700 to 1000°C for 10 min in air. It was confirmed that the thin films on STO substrate sintered above 700°C were in the epitaxial growth because the 16 diffraction spots were observed on the pole figure using (121) reflection. The <130> and <310> direction of the thin film on STO were oriented with the c-axis in parallel to the substrate surface. However, the diffraction spots of thin film on LSTO substrate sintered at 700°C were corresponds to the expected pattern for (110).


Sign in / Sign up

Export Citation Format

Share Document