Output feedback pole placement in the design of suboptimal linear quadratic regulators†

1981 ◽  
Vol 34 (3) ◽  
pp. 593-612 ◽  
Author(s):  
W. E. HOPKINS ◽  
J. MEDANIC ◽  
W. R. PERKINS
Keyword(s):  
Output Feedback ◽  
Pole Placement ◽  
Linear Quadratic ◽  
Linear Quadratic Regulators

A Note on Pole Placement of Mechanical Systems

1991 ◽  
Vol 113 (3) ◽  
pp. 420-421 ◽  
Author(s):  
C. Minas ◽  
D. J. Inman
Keyword(s):  
Least Squares ◽  
Canonical Form ◽  
Output Feedback ◽  
Closed Loop ◽  
Weighted Least Squares ◽  
Mechanical Systems ◽  
Pole Placement ◽  
Feedback Gain ◽  
Closed Loop System ◽  
Feedback Method

An output feedback method is developed, that systematically places a desired number of poles of a closed-loop system at or near desired locations. The system is transformed to its equivalent controllable canonical form, where the output feedback gain matrix is calculated in a weighted least squares scheme, that minimizes the change of the remaining modes of the system. The advantage of this method over other pole placement routines is the fact that the influence on the remaining unplaced modes of the system is minimum, which is particularly important in preserving closed-loop stability.

scholarly journals Mathematical Modelling and Control of a Two-Wheeled PUMA-LikeVehicle

2016 ◽  
Vol 6 (2) ◽  
pp. 11 ◽  
Author(s):  
Khaled M Goher
Keyword(s):  
Mathematical Modelling ◽  
Sliding Mode ◽  
Impact Load ◽  
State Space Model ◽  
Linear Quadratic Regulator ◽  
The Body ◽  
Pole Placement ◽  
General Motors ◽  
Linear Quadratic ◽  
And Control

<p class="1Body">This paper presents mathematical modelling and control of a two-wheeled single-seat vehicle. The design of the vehicle is inspired by the Personal Urban Mobility and Accessibility (PUMA) vehicle developed by General Motors® in collaboration with Segway®. The body of the vehicle is designed to have two main parts. The vehicle is activated using three motors; a linear motor to activate the upper part in a sliding mode and two DC motors activating the vehicle while moving forward/backward and/or manoeuvring. Two stages proportional-integral-derivative (PID) control schemes are designed and implemented on the system models. The state space model of the vehicle is derived from the linearized equations. Controller based on the Linear Quadratic Regulator (LQR) and the pole placement techniques are developed and implemented. Further investigation of the robustness of the developed LQR and the pole placement techniques is emphasized through various experiments using an applied impact load on the vehicle.</p>

Sign in / Sign up

Export Citation Format

Share Document