Behavior of Eucalyptus Kraft Pulp Extractives Components across ECF Bleaching and Their Impact on Brightness Reversion

Abstract The impact of hypochlorous acid (HOCl) treatment on a fully bleached eucalyptus kraft pulp was studied with respect to the final brightness as well as the brightness reversion under humid ageing conditions. The carbonyl contents in the pulps were determined by the CCOA method where carbazole-9-carboxylic acid [2-(2-aminooxethoxy)-ethoxy] amide (CCOA) was applied as the carbonyl-selective fluorescence label. The molecular weight distribution of cellulose and hemicelluloses was analyzed as well. The amount of carbonyl groups in pulp was observed to increase significantly after the HOCl treatment, and the carbonyl distribution in pulp to shift towards the low molecular weight fraction. Plotting the carbonyl content against the post color number (PCN) of the pulps revealed a linear correlation. Additionally, the effect of the hemicellulose content was investigated, and alkaline extraction was applied to partially remove the hemicelluloses in pulp. These hemicellulose-poor samples showed a lower reactivity with hypochlorous acid and less brightness reversion at equal carbonyl content.

Download Full-text

Enzymes improve ECF bleaching of pulp

BioResources ◽

10.15376/biores.1.1.34-44 ◽

2006 ◽

Vol 1 (1) ◽

pp. 34-44 ◽

Cited By ~ 4

Keyword(s):

Chlorine Dioxide ◽

Acid Treatment ◽

Kraft Pulp ◽

Elemental Chlorine ◽

Eucalyptus Kraft Pulp ◽

Mediator System ◽

Pulp Properties ◽

Laccase Enzyme ◽

Ecf Bleaching ◽

Appreciable Reduction

The delignification efficiency of different laccase enzymes was examined on the eucalyptus Kraft pulp. The laccase enzyme from Trametes versicolor showing the highest delignification efficiency was selected and used in the elemental chlorine-free bleaching sequence for improving the pulp bleachability. A n appreciable reduction in chlorine dioxide consumption was also obtained. Further reduction in chlorine dioxide consumption was obtained when the same laccase treated pulp was subjected to an acid treatment after the extraction stage followed by the DE P D sequence. Elemental-chlorine free bleaching was also performed using the xylanase-laccase treated pulp. Xylanase treatment was incorporated to the laccase mediator system in the elemental-chlorine free bleaching both sequentially and simultaneously. The bleaching sequence DE P D followed and in both the cases, the reduction in chlorine dioxide consumption was greater in comparison to the control. The chlorine dioxide consumption was reduced further when xylanase-laccase treated pulp was given an additional acid treatment. The final pulp properties of the treated pulps were comparable to the control pulp.

Download Full-text

Prebleaching of eucalypt kraft pulp with OP stages: Effect of an acid pretreatment or chelation step

TAPPI Journal ◽

10.32964/tj11.6.31 ◽

2012 ◽

Vol 11 (6) ◽

pp. 31-38

Author(s):

TATIANA M. PÓVOAS ◽

DINA A.G. ANGÉLICO ◽

ANA P.V. EGAS ◽

PEDRO E.G. LOUREIRO ◽

LICÍNIO M. GANDO-FERREIRA ◽

...

Keyword(s):

Eucalyptus Globulus ◽

Comparative Evaluation ◽

Kraft Pulp ◽

Kraft Pulps ◽

Acid Pretreatment ◽

High Brightness ◽

Pulp Viscosity ◽

Brightness Reversion

We conducted a comparative evaluation of different treatments for the bleaching of eucalypt kraft pulps beginning with OP stages. The treatments tested were (1) an acid chelation stage with DTPA (OQP sequence); (2) a hot acid stage (AOP sequence); and (3) a chelant addition into the alkaline oxygen stage ((OQ)P and A(OQ)P sequences). The latter strategy was also studied for environmental reasons, as it contributes to the closure of the filtrate cycle. The OQP sequence leads to the highest brightness gain and pulp viscosity and the lowest peroxide consumption caused by an efficient metals control. Considering that the low biodegradability of the chelant is a problem, the A(OQ)P sequence is an interesting option because it leads to reduced peroxide consumption (excluding OQP) while still reaching high brightness values and similar brightness reversion to OQP prebleaching, with only a viscosity loss of 160 dm3/kg. Therefore, a hot acid stage could be considered when a separate acid Q stage is absent in a prebleaching sequence of Eucalyptus globulus kraft pulps involving OP stages.

Download Full-text

Application of pure, thermostable, alkali-tolerant xylanase in bleaching of oxygen-delignified pine kraft pulp

TAPPI Journal ◽

10.32964/tj14.11.689 ◽

2015 ◽

Vol 14 (11) ◽

pp. 689-694

Author(s):

QINGZHI MA ◽

QI WANG ◽

CHU WANG ◽

NIANJIE FENG ◽

HUAMIN ZHAI

Keyword(s):

Intrinsic Viscosity ◽

Chlorine Dioxide ◽

High Purity ◽

Kraft Pulp ◽

Alkaline Media ◽

Industrial Scale ◽

Elemental Chlorine ◽

Effect Of Oxygen ◽

Alkaline Tolerant ◽

Ecf Bleaching

The effect of oxygen (O2)-delignified pine kraft pulp pretreatment by high-purity, thermostable, and alkaline-tolerant xylanases on elemental chlorine free (ECF) bleaching of O2-delignification kraft pulp was studied. The study found that xylanase pretreatment preserved the intrinsic viscosity and yield of O2-delignified pulp while causing about 7% of delignification with high delignification selectivity. The xylanases with high purity, higher thermostability (75°C~80°C) in highly alkaline media (pH 8.0~9.5) could be applied on an industrial scale. Pulp pretreatment by the high-purity, thermostable, and alkaline tolerant xylanases could improve pulp brightness or reduce the chlorine dioxide (ClO2) consumption. In a D0ED1D2 bleaching sequence using the same amount of ClO2, the xylanase-pretreated pulp obtained a higher brightness (88.2% vs. 89.7% ISO) at the enzyme dose of 2 U/g pulp; or for the same brightness as control (88.2% ISO), the ClO2 dosage in the D0 stage was reduced by 27%, which represents a 16% savings in total ClO2 used for bleaching.

Download Full-text

Initiating ECF bleaching sequences of eucalyptus kraft pulps with Z/D and Z/E stages

Holzforschung ◽

10.1515/hf.2010.008 ◽

2010 ◽

Vol 64 (1) ◽

Cited By ~ 6

Author(s):

Juan C. García ◽

Francisco López ◽

Antonio Pérez ◽

M. Angels Pèlach ◽

Pere Mutjé ◽

...

Keyword(s):

Hydrogen Peroxide ◽

Chlorine Dioxide ◽

Ecological Impact ◽

Substantial Reduction ◽

Reference Sequence ◽

Kraft Pulps ◽

Eucalyptus Kraft Pulp ◽

The Impact ◽

Ecf Bleaching ◽

Ozone Bleaching

Abstract Ozone bleaching is a common practice in pulping, and also of eucalyptus, where it is usually applied in combination with bleaching sequences based on oxygen, hydrogen peroxide, or chlorine dioxide. Ozone has been proven to be a highly efficient and competitive bleaching chemical in terms of delignification efficiency, low costs, and reducing ecological impact. The objective of the present work was to evaluate technology with ozone/alkaline extraction (Z/E) and ozone/chlorine dioxide (Z/D) for bleaching of eucalyptus kraft pulp. Primarily, the impact of these bleaching steps on refinability and quality of pulp should be investigated. As reference, the sequence D*(EP)D (hot chlorine dioxide, extraction in presence of hydrogen peroxide, chlorine dioxide) was selected, which is considered as the state-of-the-art bleaching in elemental chlorine free (ECF) bleaching technology. Various bleaching sequences with ozone in their first step (Z/D(EP)DP, Z/D(EP)DD, Z/EDP, Z/EDD and A*Z/EDP) were found to provide kraft pulps of similar brightness and in similar yield as the reference sequence D*(EP)D. The kappa number, viscosity, and the contents of glucose and xylose, and hexenuronic acid of the pulps were also similar. In addition, the Z sequences resulted in a substantial reduction of the total chlorine dioxide consumption (more than 30.3% in all cases). The A*Z/EDP sequence, which proved to be the most efficient, yielded 87.5% ClO2 reduction. The studied bleaching sequences also resulted in substantially improved brightness reversal with regard to the reference sequence. The sequence A*Z/EDP was also the most efficient as regards the removal or organochlorines (OX) from the pulp and their reduction in the effluents (AOX). Ozone bleaching sequences improved paper strength, especially with the A*Z/EDP sequence.

Download Full-text