scholarly journals Numerical Simulation of Electrostatic Particle Deposition on a Target in Aerosol Flow with and without Effect of Deposited Charged Particles

2003 ◽  
Vol 37 (1) ◽  
pp. 1-14 ◽  
Author(s):  
K. Tanoue ◽  
Y. Inoue ◽  
H. Masuda
Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 268
Author(s):  
Olga V. Soloveva ◽  
Sergei A. Solovev ◽  
Ruzil R. Yafizov

In this work, a study was carried out to compare the filtering and hydrodynamic properties of granular filters with solid spherical granules and spherical granules with modifications in the form of micropores. We used the discrete element method (DEM) to construct the geometry of the filters. Models of granular filters with spherical granules with diameters of 3, 4, and 5 mm, and with porosity values of 0.439, 0.466, and 0.477, respectively, were created. The results of the numerical simulation are in good agreement with the experimental data of other authors. We created models of granular filters containing micropores with different porosity values (0.158–0.366) in order to study the micropores’ effect on the aerosol motion. The study showed that micropores contribute to a decrease in hydrodynamic resistance and an increase in particle deposition efficiency. There is also a maximum limiting value of the granule microporosity for a given aerosol particle diameter when a further increase in microporosity leads to a decrease in the deposition efficiency.


2016 ◽  
Vol 680 ◽  
pp. 82-85
Author(s):  
Jian Cai ◽  
Lan Chen ◽  
Umezuruike Linus Opara

OBJECTIVE To investigate the influence of mesh type on numerical simulating the dispersion performance of micro-powders through a home-made tube. METHODS With the computational fluid dynamics (CFD) method, a powder dispersion tube was meshed in three different types, namely, tetrahedral, unstructured hexahedral and prismatic-tetrahedral hybrid meshes. The inner flow field and the kinetic characteristics of the particles were investigated. Results of the numerical simulation were compared with literature evidences. RESULTS The results showed that using tetrahedral mesh had the highest computational efficiency, while employing the unstructured hexahedral mesh obtained more accurate outlet velocity. The simulation results of the inner flow field and the kinetic characteristics of the particles were slightly different among the three mesh types. The calculated particle velocity using the tetrahedral mesh had the best correlation with the changing trend of the fine particle mass in the first 4 stages of the new generation impactor (NGI) (R2 = 0.91 and 0.89 for powder A and B, respectively). Conclusions Mesh type affected computational time, accuracy of simulation results and the prediction abilities of fine particle deposition.


2018 ◽  
Vol 32 (1) ◽  
pp. 132-139
Author(s):  
Sayaka FUJII ◽  
Minori SHIROTA ◽  
Yuki KASAMATSU ◽  
Tsubasa TANABE ◽  
Takao INAMURA ◽  
...  

1996 ◽  
Vol 22 (1) ◽  
pp. 127-133 ◽  
Author(s):  
Indra Adhiwidjaja ◽  
Shuji Matsusaka ◽  
Hiroaki Masuda

2011 ◽  
Vol 291-294 ◽  
pp. 505-508
Author(s):  
Zi Yu Zhao ◽  
Bi Bo Xia ◽  
Su Zhi Zhang ◽  
Li Wang

Splat deposition is an important part influencing coating quality in plasma spray forming. Flatten behavior of a single Ni droplet falling on a smooth substrate is evaluated by numerical simulation of ANSYS software, this paper meanwhile researches a single Ni particle deposition in the surface of flattened Al2O3 sheet and thin Al particles, the impact factors of particles flattening and the mechanism of the interaction between particles are also studied. The results have benefit to improving the coating porosity and bond strength between particles.


Sign in / Sign up

Export Citation Format

Share Document